libsigrokdecode.git - libsigrokdecode

Age	Commit message (Collapse)	Author
2014-11-23	jitter: Rename "jitter" binary out to "ascii-float".	Uwe Hermann

2014-11-23	jitter: add a binary output to report the raw jitter value.	Sebastien Bourdelin
	Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
2014-11-23	jitter: fixes an error when a miss clock/signal is detected	Sebastien Bourdelin
	Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
2014-11-09	jitter: Factor out handle_clk() and handle_sig().	Uwe Hermann

2014-11-09	Add a timing jitter decoder.	Sebastien Bourdelin
	Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
2014-11-02	pwm: Fix and rework	Sebastien Bourdelin
	Reworked in the algorithm: - Fixed the polarity setting - Taken in consideration the first transition - Using the 'None' state instead of -1 and 0 value - Simplify the algorithm and remove useless branches and variables - Avoid re-calculating the same thing more than once - Renamed a few variables for a better understanding - Duty cycle precision changed to floating value Otherwise: - Added a meta OUTPUT for the duty cycle average - Renamed the polarity option: 'polarity', 'active low/high' are well-understood terms. - Added comments Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
2014-10-19	spi: Use 'None' to signal the missing CS# pin.	Jens Steinhauser

2014-10-19	nrf24l01: Don't decode incomplete commands.	Jens Steinhauser
	Wait for the CS# line to be inactive before decoding the commands.
2014-10-19	nrf24l01: Check for CS# pin and only throw exceptions once.	Jens Steinhauser

2014-10-19	spi: Tell stacked decoders about missing CS# signal.	Jens Steinhauser
	This could previously be detected by the absence of a CS-CHANGE packet before the first data packet, but it makes the stacked decoder simpler if it is told directly.
2014-10-17	Add a PWM decoder.	Uwe Hermann

2014-10-16	uart: Fix code comment.	Uwe Hermann

2014-10-16	uart: Emit databyte and bits list at the same time.	Uwe Hermann
	This will allow for much simpler code in stacked PDs. Adapt stacked PDs to new API.
2014-10-15	instance.c: Fix whitespace.	Uwe Hermann

2014-10-15	midi: Fix two incorrect sample numbers.	Uwe Hermann

2014-10-13	All PDs: More consistent names for ss/es variables.	Uwe Hermann
	Use self.ss/self.es, or if there's a need to differentiate them a bit more, use self.ss_<suffix>/self.es_<suffix> consistently. Also, drop some unused variables.
2014-10-13	All PDs: Only import the 'Decoder' object.	Uwe Hermann
	Anything else in the pd.py files doesn't have to be imported/exposed.
2014-10-12	am230x: Factor out handle_byte() to simplify state machine.	Uwe Hermann

2014-10-12	swd: Drop unnecessary debug code.	Uwe Hermann

2014-10-12	swd: Add SWD protocol decoder for ARM Serial Wire Debug format.	Angus Gratton
	Supports annotated output for analysing debug sessions, Python output for potential stacked decoders looking at higher level debug operations.
2014-10-12	am230x: Minor documentation fix.	Uwe Hermann

2014-10-12	am230x: Use slightly more liberal timing values.	Uwe Hermann
	This seems to be required at least for some AM2301 and DHT11 sensors.
2014-10-12	am230x: Change option to 'device' to allow for more devices.	Uwe Hermann

2014-10-12	am230x: Fix self.reset() method name.	Uwe Hermann

2014-10-12	am230x: Minor cosmetics.	Uwe Hermann

2014-10-12	Add decoder for AM230x digital humidity and temperature sensors.	Johannes Römer

2014-09-15	Replace ann_format with ann_class.	Uwe Hermann
	The naming has been changed to "annotation class" a while ago.
2014-09-15	sdcard_spi/usb_packet: Drop unused variables.	Uwe Hermann

2014-09-15	uart: Implement signal inversion	David Barksdale

2014-09-11	Fix out-of-tree build of the unit tests.	Uwe Hermann

2014-09-10	Various PDs: Whitespace, cosmetics.	Uwe Hermann

2014-09-10	rfm12: Cosmetics.	Uwe Hermann
	Also, update author email address.
2014-09-08	rfm12: Frequencies: Fix typo (915MHz), add 315MHz entry.	Uwe Hermann

2014-09-08	rfm12: Avoid using the Python 'range' keyword as variable.	Uwe Hermann

2014-09-08	rfm12: Drop debug printing.	Uwe Hermann
	Any errors during decoding should be handled by the PD state machine.
2014-09-08	RFM12 decoder	Sławek Piotrowski

2014-09-01	PD tests moved into the sigrok-test repo.	Uwe Hermann
	Drop them from the libsigrokdecode repository.
2014-08-30	spdif: Simplify get_pulse_type() a bit.	Uwe Hermann

2014-08-30	spdif: Use strings for decoder states.	Uwe Hermann

2014-08-30	spdif: Add another annotation helper.	Uwe Hermann

2014-08-30	spdif: Refactor and reduce nesting level.	Uwe Hermann

2014-08-30	Add initial S/PDIF decoder.	Guenther Wenninger

2014-08-16	ds1307: Warn about (and ignore) non-DS1307 traffic.	Uwe Hermann

2014-08-16	ds1307: Correctly handle address wrap-around.	Uwe Hermann

2014-08-16	ds1307: Refactoring and cleanups.	Uwe Hermann

2014-08-16	ds1307: Handle SRAM register accesses.	Uwe Hermann

2014-08-16	ds1307: Handle register 0x07 (control register).	Uwe Hermann

2014-08-16	ds1307: Emit per-bit annotations for registers.	Uwe Hermann
	Also, add more annotation classes (and annotation rows).
2014-08-16	configure.ac: Use AM_CFLAGS instead of CFLAGS.	Uwe Hermann
	CFLAGS, CPPFLAGS, LDFLAGS and so on are so-called "user variables" and are meant for users of the package to use/override. The package itself should not set or modify them in any way. Instead, the "shadow variables" such as AM_CFLAGS, AM_CPPFLAGS, AM_LDFLAGS and so on, can be modified by the package.
2014-08-16	tca6408a: Cosmetics.	Uwe Hermann