diff options
| author | Uwe Hermann <uwe@hermann-uwe.de> | 2012-04-19 19:04:35 +0200 |
|---|---|---|
| committer | Uwe Hermann <uwe@hermann-uwe.de> | 2012-04-19 19:04:35 +0200 |
| commit | 47cd3c8ff64cd43ddf47f5da497b88e30616b162 (patch) | |
| tree | 8444bb4685c8466920e414ba48cf7ae82e63c70c /uart | |
| parent | f4298ac310a284590808a47d9e0d33ee449e15c4 (diff) | |
| download | sigrok-dumps-47cd3c8ff64cd43ddf47f5da497b88e30616b162.tar.gz sigrok-dumps-47cd3c8ff64cd43ddf47f5da497b88e30616b162.zip | |
READMEs: Cosmetics, consistency fixes, typos.
Diffstat (limited to 'uart')
| -rw-r--r-- | uart/hello_world/README | 9 | ||||
| -rw-r--r-- | uart/panasonic_pan1321/README | 7 | ||||
| -rw-r--r-- | uart/trekstor_ebr30_a/README | 5 |
3 files changed, 6 insertions, 15 deletions
diff --git a/uart/hello_world/README b/uart/hello_world/README index 5bd2f89..57365d6 100644 --- a/uart/hello_world/README +++ b/uart/hello_world/README @@ -19,14 +19,11 @@ http://olimex.com/dev/stm32-h103.html Logic analyzer setup -------------------- -The logic analyzer used for capturing is a ChronoVu LA8 at a sample rate -of 5MHz (for baud rates 921600 - 230400), 1MHz (for 115200 - 19200), -and 625kHz (for baud rates 9600 - 1200). - -The ChronoVu LA8 probes were connected to the UART like this: +The logic analyzer used was a ChronoVu LA8 at a sample rate of 5MHz (for baud +rates 921600 - 230400), 1MHz (115200 - 19200), and 625kHz (9600 - 1200): Probe UART - ------------------- + ---------------- 0 (green) TX diff --git a/uart/panasonic_pan1321/README b/uart/panasonic_pan1321/README index 240a647..db47872 100644 --- a/uart/panasonic_pan1321/README +++ b/uart/panasonic_pan1321/README @@ -16,10 +16,7 @@ http://www.datasheets.org.uk/indexdl/Datasheet-098/DSA00161388.pdf Logic analyzer setup -------------------- -The logic analyzer used for capturing is a ChronoVu LA8 at a sample rate -of 500kHz. - -The logic analyzer probes were connected like this: +The logic analyzer used was a ChronoVu LA8 (at 500kHz): Probe PAN1321 ------------------- @@ -63,7 +60,7 @@ The sigrok command line used was: The data sent/received is the same as in the above example. The difference is that we triggered on the first high RX state, which might lead to -some garbage for the first few decoded characters. This is file intended as +some garbage for the first few decoded characters. This file is intended as a test-case for this situation. diff --git a/uart/trekstor_ebr30_a/README b/uart/trekstor_ebr30_a/README index d953b46..6b6cc7f 100644 --- a/uart/trekstor_ebr30_a/README +++ b/uart/trekstor_ebr30_a/README @@ -15,10 +15,7 @@ The firmware sends the debug output at 115200 baud, with 8n1 settings. Logic analyzer setup -------------------- -The logic analyzer used for capturing is a ChronoVu LA8 at a sample rate -of 1MHz. - -The ChronoVu LA8 probes were connected to the EBR30-a device like this: +The logic analyzer used was a ChronoVu LA8 (at 1MHz): Probe EBR30-a ------------------- |