libsigrokdecode.git - libsigrokdecode

Age	Commit message (Collapse)	Author
2018-11-25	uart: add FRAME Python annotation, communicate frame validity	Gerhard Sittig
	Internally keep track of the UART frame's validity. Emit a FRAME Python annotation for aborted as well as for completed frames. This obsoletes a TODO comment in the STOP bit code path. This annotation also spans the complete frame's length, including start and parity and stop bits, which the DATA annotation doesn't cover. Stacked decoders can individually decide whether to strictly reference the mere data bits section or the complete UART frame which happened to communicate the data value.
2018-11-25	uart: document the Python annotation for BREAK	Gerhard Sittig

2018-11-20	i2s: Fix 2 issues.	Weixiao Zhang
	1. WS = 0, Left Channel; WS = 1, Right Channel 2. Data start and end at falling edge of SCK
2018-11-10	x2444m: Add some shorter annotation strings as well.	Uwe Hermann

2018-11-10	x2444m: Move variable initializations to reset().	Uwe Hermann

2018-11-10	x2444m: Make each command an extra annotation class.	Uwe Hermann

2018-11-09	Decoder for Xicor X2444M, nonvolatile static RAM.	Stefan Petersen

2018-10-21	miller: add reset() method	Gerhard Sittig

2018-10-21	lin: Simplify state handling a bit.	Uwe Hermann

2018-10-21	lin: handle_break(): Use self.putx().	Uwe Hermann

2018-10-21	lin: Simplify LinFsm._transition_allowed().	Uwe Hermann

2018-10-21	add LIN protocol decoder	stephan.thiele

2018-10-21	spiflash: Remember write protection latch from status registers	Vesa-Pekka Palmu

2018-10-21	spiflash: Bugfix: WRSR was using miso for register decode	Vesa-Pekka Palmu

2018-10-21	spiflash: Initial support for write enable state tracking	Vesa-Pekka Palmu

2018-10-21	spiflash: Handle chip erase	Vesa-Pekka Palmu
	Minimal implementation of chip erase 0x60 and 0xc7 command handling
2018-10-21	spiflash: Add Winbond W25Q80DV metadata.	Uwe Hermann

2018-10-16	uart: add support for break condition detection	Gerhard Sittig
	There are the "traffic inspecting" wait() conditions, which check an edge to find the start of START, then wait for sample points to grab the bit values. Bit times are sampled in their respective center, potential glitches around sample points get ignored. Add another independent set of wait() conditions which check _all_ edges regardless of any data communication. This results in the most reliable and maintainable detection of break conditions, regardless of how they align to data frames. Break is defined as a period of low input signal which spans at least one frame's length. Run the edge inspection after data inspection, which results in the most appropriate annotation output like leading data bits (of incomplete frames), frame errors (violated STOP bit expectations), then break conditions. This approach is most robust in the presence of incomplete input streams.
2018-10-13	ook: Fix two typos which affect the decoding results.	Uwe Hermann

2018-09-12	morse: fix for #1278	Christoph Rackwitz

2018-09-11	ook_vis: Minor code simplifications.	Uwe Hermann

2018-09-11	ook_oregon: Minor code simplifications.	Uwe Hermann

2018-09-11	ook: Minor code simplifications.	Uwe Hermann

2018-09-11	added ook_vis	Steve R

2018-09-11	added ook_oregon	Steve R

2018-09-11	added ook	Steve R

2018-09-10	miller: Minor description/whitespace fixes.	Uwe Hermann

2018-09-10	atsha204a: Add missing full stop in description.	Uwe Hermann

2018-09-09	miller: Add missing 'binary' meta-data.	Uwe Hermann

2018-09-09	Miller encoding PD	Christoph Rackwitz

2018-09-09	cec: Drop uneeded self.set_stat().	Uwe Hermann

2018-09-09	cec: Replace unneeded decode_opcode().	Uwe Hermann

2018-09-09	cec: Simplify a few code snippets.	Uwe Hermann

2018-09-09	Add HDMI CEC protocol decoder.	Jorge Solla

2018-09-09	usb_power_delivery: Whitespace/consistency cosmetics.	Uwe Hermann
	All annotation classes/rows have all-lowercase IDs. Also fix a few minor whitespace/consistency issues.
2018-09-09	usb_power_delivery: Drop currently unused self.out_python.	Uwe Hermann

2018-09-09	usb_power_delivery: Drop non-existing max_w for now.	Uwe Hermann

2018-09-09	usb_power_delivery: better PD 3.0 support and other changes	davidanger
	- better PD 3.0 support - display PD revision in output - different flags for source and sink PDO's and RDO's [Note: This commit is the remaining set of manually merged changes of the recent commits from Peetz0r <peter@haas-en-berg.nl> and the improvements from davidanger <davidanger@163.com> over at https://github.com/davidanger/libsigrokdecode]
2018-09-09	usb_power_delivery: wait 1ms instead of 100k samples	Peetz0r

2018-09-09	usb_power_delivery: improve wording	Peetz0r
	Control channel => Configuration Channel
2018-09-09	usb_power_delivery: PPS support	Peetz0r

2018-09-09	usb_power_delivery: Move stored PDO's inside Decoder class	Peetz0r
	Also add timeout functionality to properly decode the last packet in a capture.
2018-09-09	usb_power_delivery: print more useful stuff	Peetz0r
	including: - power in watts - type of PDO (fixed, pps, etc) - which PDO belongs to an RDO also deduplicated get_source_cap() and get_sink_cap()
2018-09-06	swim: Simplify a code snippet.	Uwe Hermann

2018-09-06	Decoder for STM8 series MCUs SWIM protocol.	Mike Jagdis
	Signed-off-by: Mike Jagdis <mjagdis@eris-associates.co.uk> (github: mjagdis)
2018-08-30	counter: Consider edge counter offset also in word processing	Soeren Apel

2018-08-30	counter: Let user decide how to handle the initial dead_cycles state	Soeren Apel
	edge_off and word_off are not included in the if block because a user may want to use edge_off to dismiss unwanted clocks instead of dead_cycles.
2018-08-30	counter: Introduce option to ignore edges	Gerhard Sittig

2018-08-30	counter: Use initial counter values also after a reset	Soeren Apel

2018-08-30	spi: Create the out_bitrate annotation unconditionally	Josef Gajdusek
	The start() method is called before the metadata() method, which results in the the out_bitrate instance variable never getting created and ending up as an AttributeError when decoding. (observed with sigrok-cli and VCD file as the input)