| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This also fixes incorrect annotation classes for bit, bit warning, and R1.
Also, auto-generate some more parts of the annotation class listing.
|
|
|
|
|
|
|
|
Also, automate construction of the Ann SrdIntEnum.
This avoids having to remember to manually keep two lists in sync.
|
|
|
|
|
|
|
|
|
|
|
|
cJTAG only has two wires/channels.
|
|
|
|
|
|
|
|
|
|
[Note: This is a commit from Kongou Hikari ("diodep" on GitHub) that was
"rebased" by Uwe Hermann on top of the current libsigrokdecode mainline JTAG
decoder. There are various reasons for this, including avoiding non-mainline
or outdated decoder changes, as well as making it easily visible what the
changes vs. the current JTAG decoder are, in case we later need to apply some
changes to both decoders or in case both decoders might be merged later on.
Minor cosmetic and naming changes were also squashed in (no functional
changes, though).]
|
|
|
|
This is not technically a bug since (at least some) datasheets refer
to this command as "Chip erase", it just happens to have two different
command codes (0x60 and 0xc7).
In order to not confuse users with two annotation classes with the
same name, we'll call the second one "Chip erase 2" to match the
"CE2" short name.
This fixes bug #1482.
|
|
It was unfortunate that the previous DMX512 decoder implementation
re-invented UART decoder features and introduced new issues in the
process. Automatic polarity detection is just impossible when the full
set of valid DMX timings is to get supported. Sample numbers suffered
from floating point rounding errors.
Introduce a stacked decoder on top of UART which exclusively deals with
DMX512 details, and transparently benefits from all available UART
features (adjustable polarity, robust and correct sampling, data byte
accumulation, BREAK detection while silencing false STOP violations). On
one hand this requires users to specify the bitrate (250kbps), on the
other hand it results in reliable operation for all captures that have
become available so far.
Provide Python output for stacked decoders which can process protocol
extensions like RDM. Prepare the DMX512 decoder itself to handle simple
cases of protocol extensions (start codes other than 0). Add support for
additional constraint checks, emit warnings when user specified limits
are violated: short BREAK, long MARK, long RESET to RESET and short
BREAK to BREAK intervals. This shall speedup the identification of bus
health issues (data loss or corruption) or improper controller timing.
Also hide all-zero values by default, to make used channels visually
stand out, and help users focus their attention. For special cases (like
16bit data, or zero being a valid set-point for the channels) users can
enforce the display of all values. Provide an option to present byte
values to users in the most appropriate format for the use case.
This resolves bug #1442.
|
|
The existing DMX512 decoder implementation duplicates UART specific
knowledge, and implements some of the redundant logic in ways which fail
to interpret correct input data. See bug #1442 for details.
This commit removes the previous decoder implementation before adding a
more recent version, to gain a more readable history across that decoder
replacement.
|
|
Data byte transmission is complete when the STOP bit was communicated.
End the STOP bit at the rising CLOCK edge of the 11th bit time, do not
rely on the host's clock inhibit after data transmission. This avoids
the unexpected expansion of a STOP bit well into the next data byte.
This fixes bug #1460, where absence of host activity after the first
data byte loses synchronization to the input stream.
Rephrase pin level sampling while we are here. Reflect that the clock
line is used for .wait() conditions, but its level is not evaluated.
Only data line levels get processed.
Comment on the implementation's assumption of specific input data (the
device as transmitter, host transmit may not be supported, or can result
in unexpected output). Which may be acceptable yet maintainers need to
remain aware.
|
|
|
|
|
|
|
|
|
|
Previously there were two different annotation classes with 100% overlap.
|
|
This was causing incorrect annotation class indices to be used.
|
|
|
|
|
|
|
|
This fixes bug #1474.
|
|
Using human-readable names for annotation classes (instead of numeric
indices) improves readability and maintainability of the decoder, and can
also prevent bugs due to incorrect indices.
|
|
This commit amends bd50ceb314e4. Fix a typo in a comment. Rephrase the
bit width percentage calculation such that readers remain aware of the
necessity for floating point math in sample position calculations. This
commit does not change behaviour, Python 3 always yields float results
for divisions. It's about raising awareness.
|
|
The previous implementation of the UART decoder used to sample bit values
strictly at the center position within a bit time. This commit introduces
support to sample bit values at arbitrary positions in the range of 1-99%
of the bit time. This allows to work around glitches in existing captures
as well as using the decoder for UART like protocols which don't sample
bit values at the center position (like EIB aka KNX).
This implementation is incomplete (on purpose). Although this version
improves the ability to extract data from captures, it also introduces
inaccuracies in the annotation positions for non-default values of the
sample point position. Addressing this issue is left for later, assuming
that it'll be a byproduct of another commit series that is being worked
on (general annotation position adjustment and stop bits support).
|
|
|
|
Underscores in number literals are a recent Python feature which only
was introduced in version 3.6. The sigrok project claims compatibility
with previous Python versions, but the signature decoder fails to load
with this error:
$ pulseview
srd: SyntaxError: Failed to load decoder signature: import by name failed: invalid syntax (pd.py, line 138)
srd: Traceback (most recent call last):
File "/home/user/share/libsigrokdecode/decoders/signature/__init__.py", line 25, in <module>
from .pd import Decoder
File "/home/user/share/libsigrokdecode/decoders/signature/pd.py", line 138
incoming = (bin(shiftreg & 0b0000_0010_1001_0001).count('1') + data) & 1
^
SyntaxError: invalid syntax
Use the more compact hex presentation for a magic binary pattern. This
obsoletes the necessity to separate groups of bits for readability.
|
|
|
|
|
|
All PDs where "trivial" self.wait() conversion was used now have this
specific comment, so it's easy to grep for.
|
|
This is managed by the backend and should be read-only for PDs.
|
|
|
|
|
|
|
|
|
|
This decoder annotates i2c traffic to indicate the type of HDCP
message contained. It includes HDCP2.2 and HDCP1.4. Useful for
analysing HDCP negotiation failures.
|
|
Also flush previously accumulated payload data when the IFC signal
asserts (interface clear, a controller requests ownership of the bus).
This is in line with EOI (end of message) and ATN (start of a command,
including change of "connected" peers or direction of communication).
|
|
When a capture contains output from a talking device, but neither
contains EOI (end of transmission) nor ATN (new commands, including
changes in the set of communicating peers or communication direction),
then lower layer data bytes would be shown but accumulated runs of upper
layer payload data would not. The hp53131a-ton.sr capture demonstrates
this behaviour.
Add transparent support for the typical case of communicating SCPI over
GPIB. Do emit upper layer payload data annotations when termination
sequences for text lines were seen. Allow users to disable this feature
when it's not appropriate for binary content.
It's an internal implementation detail that accumulated data gets flushed.
Communicate the user visible option as "payload data separation", which
should most appropriately reflect the resulting behaviour. The specific
implementation of this feature can also support different kinds of payload
chunk separation.
|
|
|
|
This can be used by frontends for decoder search features.
|
