summaryrefslogtreecommitdiff
path: root/decoders
diff options
context:
space:
mode:
Diffstat (limited to 'decoders')
-rw-r--r--decoders/common/__init__.py20
-rw-r--r--decoders/common/plugtrx/__init__.py20
-rw-r--r--decoders/common/plugtrx/mod.py192
-rw-r--r--decoders/common/sdcard/__init__.py21
-rw-r--r--decoders/common/sdcard/mod.py186
-rw-r--r--decoders/common/srdhelper/__init__.py21
-rw-r--r--decoders/common/srdhelper/mod.py23
-rw-r--r--decoders/dcf77/pd.py2
-rw-r--r--decoders/ds1307/pd.py2
-rw-r--r--decoders/rtc8564/pd.py2
-rw-r--r--decoders/sdcard_sd/pd.py2
-rw-r--r--decoders/sdcard_spi/pd.py2
-rw-r--r--decoders/xfp/pd.py2
13 files changed, 489 insertions, 6 deletions
diff --git a/decoders/common/__init__.py b/decoders/common/__init__.py
new file mode 100644
index 0000000..c597431
--- /dev/null
+++ b/decoders/common/__init__.py
@@ -0,0 +1,20 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2016 Uwe Hermann <uwe@hermann-uwe.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
diff --git a/decoders/common/plugtrx/__init__.py b/decoders/common/plugtrx/__init__.py
new file mode 100644
index 0000000..8dd0822
--- /dev/null
+++ b/decoders/common/plugtrx/__init__.py
@@ -0,0 +1,20 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2016 Bert Vermeulen <bert@biot.com>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 3 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
+##
+
+from .mod import *
diff --git a/decoders/common/plugtrx/mod.py b/decoders/common/plugtrx/mod.py
new file mode 100644
index 0000000..3d1b66d
--- /dev/null
+++ b/decoders/common/plugtrx/mod.py
@@ -0,0 +1,192 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2016 Bert Vermeulen <bert@biot.com>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 3 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
+##
+
+# This module contains definitions for use by pluggable network adapters,
+# such as SFP, XFP etc.
+
+MODULE_ID = {
+ 0x01: 'GBIC',
+ 0x02: 'Integrated module/connector',
+ 0x03: 'SFP',
+ 0x04: '300-pin XBI',
+ 0x05: 'XENPAK',
+ 0x06: 'XFP',
+ 0x07: 'XFF',
+ 0x08: 'XFP-E',
+ 0x09: 'XPAK',
+ 0x0a: 'X2',
+}
+
+ALARM_THRESHOLDS = {
+ 0: 'Temp high alarm',
+ 2: 'Temp low alarm',
+ 4: 'Temp high warning',
+ 6: 'Temp low warning',
+ 16: 'Bias high alarm',
+ 18: 'Bias low alarm',
+ 20: 'Bias high warning',
+ 22: 'Bias low warning',
+ 24: 'TX power high alarm',
+ 26: 'TX power low alarm',
+ 28: 'TX power high warning',
+ 30: 'TX power low warning',
+ 32: 'RX power high alarm',
+ 34: 'RX power low alarm',
+ 36: 'RX power high warning',
+ 38: 'RX power low warning',
+ 40: 'AUX 1 high alarm',
+ 42: 'AUX 1 low alarm',
+ 44: 'AUX 1 high warning',
+ 46: 'AUX 1 low warning',
+ 48: 'AUX 2 high alarm',
+ 50: 'AUX 2 low alarm',
+ 52: 'AUX 2 high warning',
+ 54: 'AUX 2 low warning',
+}
+
+AD_READOUTS = {
+ 0: 'Module temperature',
+ 4: 'TX bias current',
+ 6: 'Measured TX output power',
+ 8: 'Measured RX input power',
+ 10: 'AUX 1 measurement',
+ 12: 'AUX 2 measurement',
+}
+
+GCS_BITS = [
+ 'TX disable',
+ 'Soft TX disable',
+ 'MOD_NR',
+ 'P_Down',
+ 'Soft P_Down',
+ 'Interrupt',
+ 'RX_LOS',
+ 'Data_Not_Ready',
+ 'TX_NR',
+ 'TX_Fault',
+ 'TX_CDR not locked',
+ 'RX_NR',
+ 'RX_CDR not locked',
+]
+
+CONNECTOR = {
+ 0x01: 'SC',
+ 0x02: 'Fibre Channel style 1 copper',
+ 0x03: 'Fibre Channel style 2 copper',
+ 0x04: 'BNC/TNC',
+ 0x05: 'Fibre Channel coax',
+ 0x06: 'FiberJack',
+ 0x07: 'LC',
+ 0x08: 'MT-RJ',
+ 0x09: 'MU',
+ 0x0a: 'SG',
+ 0x0b: 'Optical pigtail',
+ 0x20: 'HSSDC II',
+ 0x21: 'Copper pigtail',
+}
+
+TRANSCEIVER = [
+ # 10GB Ethernet
+ ['10GBASE-SR', '10GBASE-LR', '10GBASE-ER', '10GBASE-LRM', '10GBASE-SW',
+ '10GBASE-LW', '10GBASE-EW'],
+ # 10GB Fibre Channel
+ ['1200-MX-SN-I', '1200-SM-LL-L', 'Extended Reach 1550 nm',
+ 'Intermediate reach 1300 nm FP'],
+ # 10GB Copper
+ [],
+ # 10GB low speed
+ ['1000BASE-SX / 1xFC MMF', '1000BASE-LX / 1xFC SMF', '2xFC MMF',
+ '2xFC SMF', 'OC48-SR', 'OC48-IR', 'OC48-LR'],
+ # 10GB SONET/SDH interconnect
+ ['I-64.1r', 'I-64.1', 'I-64.2r', 'I-64.2', 'I-64.3', 'I-64.5'],
+ # 10GB SONET/SDH short haul
+ ['S-64.1', 'S-64.2a', 'S-64.2b', 'S-64.3a', 'S-64.3b', 'S-64.5a', 'S-64.5b'],
+ # 10GB SONET/SDH long haul
+ ['L-64.1', 'L-64.2a', 'L-64.2b', 'L-64.2c', 'L-64.3', 'G.959.1 P1L1-2D2'],
+ # 10GB SONET/SDH very long haul
+ ['V-64.2a', 'V-64.2b', 'V-64.3'],
+]
+
+SERIAL_ENCODING = [
+ '64B/66B',
+ '8B/10B',
+ 'SONET scrambled',
+ 'NRZ',
+ 'RZ',
+]
+
+XMIT_TECH = [
+ '850 nm VCSEL',
+ '1310 nm VCSEL',
+ '1550 nm VCSEL',
+ '1310 nm FP',
+ '1310 nm DFB',
+ '1550 nm DFB',
+ '1310 nm EML'
+ '1550 nm EML'
+ 'copper',
+]
+
+CDR = [
+ '9.95Gb/s',
+ '10.3Gb/s',
+ '10.5Gb/s',
+ '10.7Gb/s',
+ '11.1Gb/s',
+ '(unknown)',
+ 'lineside loopback mode',
+ 'XFI loopback mode',
+]
+
+DEVICE_TECH = [
+ ['no wavelength control', 'sctive wavelength control'],
+ ['uncooled transmitter device', 'cooled transmitter'],
+ ['PIN detector', 'APD detector'],
+ ['transmitter not tunable', 'transmitter tunable'],
+]
+
+ENHANCED_OPTS = [
+ 'VPS',
+ 'soft TX_DISABLE',
+ 'soft P_Down',
+ 'VPS LV regulator mode',
+ 'VPS bypassed regulator mode',
+ 'active FEC control',
+ 'wavelength tunability',
+ 'CMU',
+]
+
+AUX_TYPES = [
+ 'not implemented',
+ 'APD bias voltage',
+ '(unknown)',
+ 'TEC current',
+ 'laser temperature',
+ 'laser wavelength',
+ '5V supply voltage',
+ '3.3V supply voltage',
+ '1.8V supply voltage',
+ '-5.2V supply voltage',
+ '5V supply current',
+ '(unknown)',
+ '(unknown)',
+ '3.3V supply current',
+ '1.8V supply current',
+ '-5.2V supply current',
+]
diff --git a/decoders/common/sdcard/__init__.py b/decoders/common/sdcard/__init__.py
new file mode 100644
index 0000000..cf09d9d
--- /dev/null
+++ b/decoders/common/sdcard/__init__.py
@@ -0,0 +1,21 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2012-2014 Uwe Hermann <uwe@hermann-uwe.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+from .mod import *
diff --git a/decoders/common/sdcard/mod.py b/decoders/common/sdcard/mod.py
new file mode 100644
index 0000000..f553cf1
--- /dev/null
+++ b/decoders/common/sdcard/mod.py
@@ -0,0 +1,186 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2012-2014 Uwe Hermann <uwe@hermann-uwe.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+# Normal commands (CMD)
+# Unlisted items are 'Reserved' as per SD spec. The 'Unknown' items don't
+# seem to be mentioned in the spec, but aren't marked as reserved either.
+cmd_names = {
+ 0: 'GO_IDLE_STATE',
+ 1: 'SEND_OP_COND', # Reserved in SD mode
+ 2: 'ALL_SEND_CID',
+ 3: 'SEND_RELATIVE_ADDR',
+ 4: 'SET_DSR',
+ 5: 'IO_SEND_OP_COND', # SDIO-only
+ 6: 'SWITCH_FUNC', # New since spec 1.10
+ 7: 'SELECT/DESELECT_CARD',
+ 8: 'SEND_IF_COND',
+ 9: 'SEND_CSD',
+ 10: 'SEND_CID',
+ 11: 'VOLTAGE_SWITCH',
+ 12: 'STOP_TRANSMISSION',
+ 13: 'SEND_STATUS',
+ # 14: Reserved
+ 15: 'GO_INACTIVE_STATE',
+ 16: 'SET_BLOCKLEN',
+ 17: 'READ_SINGLE_BLOCK',
+ 18: 'READ_MULTIPLE_BLOCK',
+ 19: 'SEND_TUNING_BLOCK',
+ 20: 'SPEED_CLASS_CONTROL',
+ # 21-22: Reserved
+ 23: 'SET_BLOCK_COUNT',
+ 24: 'WRITE_BLOCK',
+ 25: 'WRITE_MULTIPLE_BLOCK',
+ 26: 'Reserved for manufacturer',
+ 27: 'PROGRAM_CSD',
+ 28: 'SET_WRITE_PROT',
+ 29: 'CLR_WRITE_PROT',
+ 30: 'SEND_WRITE_PROT',
+ # 31: Reserved
+ 32: 'ERASE_WR_BLK_START', # SPI mode: ERASE_WR_BLK_START_ADDR
+ 33: 'ERASE_WR_BLK_END', # SPI mode: ERASE_WR_BLK_END_ADDR
+ 34: 'Reserved for CMD6', # New since spec 1.10
+ 35: 'Reserved for CMD6', # New since spec 1.10
+ 36: 'Reserved for CMD6', # New since spec 1.10
+ 37: 'Reserved for CMD6', # New since spec 1.10
+ 38: 'ERASE',
+ # 39: Reserved
+ 40: 'Reserved for security specification',
+ # 41: Reserved
+ 42: 'LOCK_UNLOCK',
+ # 43-49: Reserved
+ 50: 'Reserved for CMD6', # New since spec 1.10
+ # 51: Reserved
+ 52: 'IO_RW_DIRECT', # SDIO-only
+ 53: 'IO_RW_EXTENDED', # SDIO-only
+ 54: 'Unknown',
+ 55: 'APP_CMD',
+ 56: 'GEN_CMD',
+ 57: 'Reserved for CMD6', # New since spec 1.10
+ 58: 'READ_OCR', # Reserved in SD mode
+ 59: 'CRC_ON_OFF', # Reserved in SD mode
+ 60: 'Reserved for manufacturer',
+ 61: 'Reserved for manufacturer',
+ 62: 'Reserved for manufacturer',
+ 63: 'Reserved for manufacturer',
+}
+
+# Application-specific commands (ACMD)
+# Unlisted items are 'Reserved' as per SD spec. The 'Unknown' items don't
+# seem to be mentioned in the spec, but aren't marked as reserved either.
+acmd_names = {
+ # 1-5: Reserved
+ 6: 'SET_BUS_WIDTH',
+ # 7-12: Reserved
+ 13: 'SD_STATUS',
+ 14: 'Reserved for Security Application',
+ 15: 'Reserved for Security Application',
+ 16: 'Reserved for Security Application',
+ # 17: Reserved
+ 18: 'Reserved for SD security applications',
+ # 19-21: Reserved
+ 22: 'SEND_NUM_WR_BLOCKS',
+ 23: 'SET_WR_BLK_ERASE_COUNT',
+ # 24: Reserved
+ 25: 'Reserved for SD security applications',
+ 26: 'Reserved for SD security applications',
+ 27: 'Reserved for security specification',
+ 28: 'Reserved for security specification',
+ # 29: Reserved
+ 30: 'Reserved for security specification',
+ 31: 'Reserved for security specification',
+ 32: 'Reserved for security specification',
+ 33: 'Reserved for security specification',
+ 34: 'Reserved for security specification',
+ 35: 'Reserved for security specification',
+ # 36-37: Reserved
+ 38: 'Reserved for SD security applications',
+ # 39-40: Reserved
+ 41: 'SD_SEND_OP_COND',
+ 42: 'SET_CLR_CARD_DETECT',
+ 43: 'Reserved for SD security applications',
+ 44: 'Reserved for SD security applications',
+ 45: 'Reserved for SD security applications',
+ 46: 'Reserved for SD security applications',
+ 47: 'Reserved for SD security applications',
+ 48: 'Reserved for SD security applications',
+ 49: 'Reserved for SD security applications',
+ 50: 'Unknown',
+ 51: 'SEND_SCR',
+ 52: 'Reserved for security specification',
+ 53: 'Reserved for security specification',
+ 54: 'Reserved for security specification',
+ 55: 'Non-existant', # Doesn't exist (equivalent to CMD55)
+ 56: 'Reserved for security specification',
+ 57: 'Reserved for security specification',
+ 58: 'Reserved for security specification',
+ 59: 'Reserved for security specification',
+ 60: 'Unknown',
+ 61: 'Unknown',
+ 62: 'Unknown',
+ 63: 'Unknown',
+}
+
+accepted_voltages = {
+ 0b0001: '2.7-3.6V',
+ 0b0010: 'reserved for low voltage range',
+ 0b0100: 'reserved',
+ 0b1000: 'reserved',
+ # All other values: "not defined".
+}
+
+card_status = {
+ 0: 'Reserved for manufacturer test mode',
+ 1: 'Reserved for manufacturer test mode',
+ 2: 'Reserved for application specific commands',
+ 3: 'AKE_SEQ_ERROR',
+ 4: 'Reserved for SDIO card',
+ 5: 'APP_CMD',
+ 6: 'Unknown',
+ 7: 'Unknown',
+ 8: 'READY_FOR_DATA',
+ 9: 'CURRENT_STATE', # CURRENT_STATE is a 4-bit value (decimal: 0..15).
+ 10: 'CURRENT_STATE',
+ 11: 'CURRENT_STATE',
+ 12: 'CURRENT_STATE',
+ 13: 'ERASE_RESET',
+ 14: 'CARD_ECC_DISABLED',
+ 15: 'WP_ERASE_SKIP',
+ 16: 'CSD_OVERWRITE',
+ 17: 'Reserved for DEFERRED_RESPONSE', # See eSD addendum
+ 18: 'Reserved',
+ 19: 'ERROR',
+ 20: 'CC_ERROR',
+ 21: 'CARD_ECC_FAILED',
+ 22: 'ILLEGAL_COMMAND',
+ 23: 'COM_CRC_ERROR',
+ 24: 'LOCK_UNLOCK_FAILED',
+ 25: 'CARD_IS_LOCKED',
+ 26: 'WP_VIOLATION',
+ 27: 'ERASE_PARAM',
+ 28: 'ERASE_SEQ_ERROR',
+ 29: 'BLOCK_LEN_ERROR',
+ 30: 'ADDRESS_ERROR',
+ 31: 'OUT_OF_RANGE',
+}
+
+sd_status = {
+ # 311:0: Reserved for manufacturer
+ # 391:312: Reserved
+}
diff --git a/decoders/common/srdhelper/__init__.py b/decoders/common/srdhelper/__init__.py
new file mode 100644
index 0000000..cf09d9d
--- /dev/null
+++ b/decoders/common/srdhelper/__init__.py
@@ -0,0 +1,21 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2012-2014 Uwe Hermann <uwe@hermann-uwe.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+from .mod import *
diff --git a/decoders/common/srdhelper/mod.py b/decoders/common/srdhelper/mod.py
new file mode 100644
index 0000000..e65ab17
--- /dev/null
+++ b/decoders/common/srdhelper/mod.py
@@ -0,0 +1,23 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2012-2014 Uwe Hermann <uwe@hermann-uwe.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+# Return the specified BCD number (max. 8 bits) as integer.
+def bcd2int(b):
+ return (b & 0x0f) + ((b >> 4) * 10)
diff --git a/decoders/dcf77/pd.py b/decoders/dcf77/pd.py
index 4f956aa..0f1d3d1 100644
--- a/decoders/dcf77/pd.py
+++ b/decoders/dcf77/pd.py
@@ -20,7 +20,7 @@
import sigrokdecode as srd
import calendar
-from srdhelper import bcd2int
+from common.srdhelper import bcd2int
class SamplerateError(Exception):
pass
diff --git a/decoders/ds1307/pd.py b/decoders/ds1307/pd.py
index 6d862af..f181fd9 100644
--- a/decoders/ds1307/pd.py
+++ b/decoders/ds1307/pd.py
@@ -21,7 +21,7 @@
import re
import sigrokdecode as srd
-from srdhelper import bcd2int
+from common.srdhelper import bcd2int
days_of_week = (
'Sunday', 'Monday', 'Tuesday', 'Wednesday',
diff --git a/decoders/rtc8564/pd.py b/decoders/rtc8564/pd.py
index 4bcd096..4ecc15a 100644
--- a/decoders/rtc8564/pd.py
+++ b/decoders/rtc8564/pd.py
@@ -19,7 +19,7 @@
##
import sigrokdecode as srd
-from srdhelper import bcd2int
+from common.srdhelper import bcd2int
def reg_list():
l = []
diff --git a/decoders/sdcard_sd/pd.py b/decoders/sdcard_sd/pd.py
index 442a563..79c2074 100644
--- a/decoders/sdcard_sd/pd.py
+++ b/decoders/sdcard_sd/pd.py
@@ -19,7 +19,7 @@
##
import sigrokdecode as srd
-from sdcard import (cmd_names, acmd_names, accepted_voltages, card_status, sd_status)
+from common.sdcard import (cmd_names, acmd_names, accepted_voltages, card_status, sd_status)
class Decoder(srd.Decoder):
api_version = 2
diff --git a/decoders/sdcard_spi/pd.py b/decoders/sdcard_spi/pd.py
index e069b6e..45490ad 100644
--- a/decoders/sdcard_spi/pd.py
+++ b/decoders/sdcard_spi/pd.py
@@ -19,7 +19,7 @@
##
import sigrokdecode as srd
-from sdcard import (cmd_names, acmd_names)
+from common.sdcard import (cmd_names, acmd_names)
class Decoder(srd.Decoder):
api_version = 2
diff --git a/decoders/xfp/pd.py b/decoders/xfp/pd.py
index 26f3311..27135e5 100644
--- a/decoders/xfp/pd.py
+++ b/decoders/xfp/pd.py
@@ -18,7 +18,7 @@
##
import sigrokdecode as srd
-from plugtrx import (MODULE_ID, ALARM_THRESHOLDS, AD_READOUTS, GCS_BITS,
+from common.plugtrx import (MODULE_ID, ALARM_THRESHOLDS, AD_READOUTS, GCS_BITS,
CONNECTOR, TRANSCEIVER, SERIAL_ENCODING, XMIT_TECH, CDR, DEVICE_TECH,
ENHANCED_OPTS, AUX_TYPES)
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-15 01:30:24 +0000