diff options
Diffstat (limited to 'decoders/common/plugtrx/mod.py')
| -rw-r--r-- | decoders/common/plugtrx/mod.py | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/decoders/common/plugtrx/mod.py b/decoders/common/plugtrx/mod.py new file mode 100644 index 0000000..3d1b66d --- /dev/null +++ b/decoders/common/plugtrx/mod.py @@ -0,0 +1,192 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2016 Bert Vermeulen <bert@biot.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 3 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, see <http://www.gnu.org/licenses/>. +## + +# This module contains definitions for use by pluggable network adapters, +# such as SFP, XFP etc. + +MODULE_ID = { + 0x01: 'GBIC', + 0x02: 'Integrated module/connector', + 0x03: 'SFP', + 0x04: '300-pin XBI', + 0x05: 'XENPAK', + 0x06: 'XFP', + 0x07: 'XFF', + 0x08: 'XFP-E', + 0x09: 'XPAK', + 0x0a: 'X2', +} + +ALARM_THRESHOLDS = { + 0: 'Temp high alarm', + 2: 'Temp low alarm', + 4: 'Temp high warning', + 6: 'Temp low warning', + 16: 'Bias high alarm', + 18: 'Bias low alarm', + 20: 'Bias high warning', + 22: 'Bias low warning', + 24: 'TX power high alarm', + 26: 'TX power low alarm', + 28: 'TX power high warning', + 30: 'TX power low warning', + 32: 'RX power high alarm', + 34: 'RX power low alarm', + 36: 'RX power high warning', + 38: 'RX power low warning', + 40: 'AUX 1 high alarm', + 42: 'AUX 1 low alarm', + 44: 'AUX 1 high warning', + 46: 'AUX 1 low warning', + 48: 'AUX 2 high alarm', + 50: 'AUX 2 low alarm', + 52: 'AUX 2 high warning', + 54: 'AUX 2 low warning', +} + +AD_READOUTS = { + 0: 'Module temperature', + 4: 'TX bias current', + 6: 'Measured TX output power', + 8: 'Measured RX input power', + 10: 'AUX 1 measurement', + 12: 'AUX 2 measurement', +} + +GCS_BITS = [ + 'TX disable', + 'Soft TX disable', + 'MOD_NR', + 'P_Down', + 'Soft P_Down', + 'Interrupt', + 'RX_LOS', + 'Data_Not_Ready', + 'TX_NR', + 'TX_Fault', + 'TX_CDR not locked', + 'RX_NR', + 'RX_CDR not locked', +] + +CONNECTOR = { + 0x01: 'SC', + 0x02: 'Fibre Channel style 1 copper', + 0x03: 'Fibre Channel style 2 copper', + 0x04: 'BNC/TNC', + 0x05: 'Fibre Channel coax', + 0x06: 'FiberJack', + 0x07: 'LC', + 0x08: 'MT-RJ', + 0x09: 'MU', + 0x0a: 'SG', + 0x0b: 'Optical pigtail', + 0x20: 'HSSDC II', + 0x21: 'Copper pigtail', +} + +TRANSCEIVER = [ + # 10GB Ethernet + ['10GBASE-SR', '10GBASE-LR', '10GBASE-ER', '10GBASE-LRM', '10GBASE-SW', + '10GBASE-LW', '10GBASE-EW'], + # 10GB Fibre Channel + ['1200-MX-SN-I', '1200-SM-LL-L', 'Extended Reach 1550 nm', + 'Intermediate reach 1300 nm FP'], + # 10GB Copper + [], + # 10GB low speed + ['1000BASE-SX / 1xFC MMF', '1000BASE-LX / 1xFC SMF', '2xFC MMF', + '2xFC SMF', 'OC48-SR', 'OC48-IR', 'OC48-LR'], + # 10GB SONET/SDH interconnect + ['I-64.1r', 'I-64.1', 'I-64.2r', 'I-64.2', 'I-64.3', 'I-64.5'], + # 10GB SONET/SDH short haul + ['S-64.1', 'S-64.2a', 'S-64.2b', 'S-64.3a', 'S-64.3b', 'S-64.5a', 'S-64.5b'], + # 10GB SONET/SDH long haul + ['L-64.1', 'L-64.2a', 'L-64.2b', 'L-64.2c', 'L-64.3', 'G.959.1 P1L1-2D2'], + # 10GB SONET/SDH very long haul + ['V-64.2a', 'V-64.2b', 'V-64.3'], +] + +SERIAL_ENCODING = [ + '64B/66B', + '8B/10B', + 'SONET scrambled', + 'NRZ', + 'RZ', +] + +XMIT_TECH = [ + '850 nm VCSEL', + '1310 nm VCSEL', + '1550 nm VCSEL', + '1310 nm FP', + '1310 nm DFB', + '1550 nm DFB', + '1310 nm EML' + '1550 nm EML' + 'copper', +] + +CDR = [ + '9.95Gb/s', + '10.3Gb/s', + '10.5Gb/s', + '10.7Gb/s', + '11.1Gb/s', + '(unknown)', + 'lineside loopback mode', + 'XFI loopback mode', +] + +DEVICE_TECH = [ + ['no wavelength control', 'sctive wavelength control'], + ['uncooled transmitter device', 'cooled transmitter'], + ['PIN detector', 'APD detector'], + ['transmitter not tunable', 'transmitter tunable'], +] + +ENHANCED_OPTS = [ + 'VPS', + 'soft TX_DISABLE', + 'soft P_Down', + 'VPS LV regulator mode', + 'VPS bypassed regulator mode', + 'active FEC control', + 'wavelength tunability', + 'CMU', +] + +AUX_TYPES = [ + 'not implemented', + 'APD bias voltage', + '(unknown)', + 'TEC current', + 'laser temperature', + 'laser wavelength', + '5V supply voltage', + '3.3V supply voltage', + '1.8V supply voltage', + '-5.2V supply voltage', + '5V supply current', + '(unknown)', + '(unknown)', + '3.3V supply current', + '1.8V supply current', + '-5.2V supply current', +] |