diff options
Diffstat (limited to 'decoders/dali/lists.py')
-rw-r--r-- | decoders/dali/lists.py | 98 |
1 files changed, 98 insertions, 0 deletions
diff --git a/decoders/dali/lists.py b/decoders/dali/lists.py new file mode 100644 index 0000000..24e6bc4 --- /dev/null +++ b/decoders/dali/lists.py @@ -0,0 +1,98 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2015 Jeremy Swanson <jeremy@rakocontrols.com> +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program. If not, see <http://www.gnu.org/licenses/>. +## + +# DALI Extended commands +extendedCommands = { + 0xA1: ['Terminate special processes', 'Terminate'], + 0xA3: ['DTR = DATA', 'DTR'], + 0xA5: ['INITIALISE', 'INIT'], + 0xA7: ['RANDOMISE', 'RAND'], + 0xA9: ['COMPARE', 'COMP'], + 0xAB: ['WITHDRAW', 'WDRAW'], + 0xB1: ['SET SEARCH H', 'SAH'], + 0xB3: ['SET SEARCH M', 'SAM'], + 0xB5: ['SET SEARCH L', 'SAL'], + 0xB7: ['Program Short Address', 'ProgSA'], + 0xB9: ['Verify Short Address', 'VfySA'], + 0xBB: ['Query Short Address', 'QryShort'], + 0xBD: ['Physical Selection', 'PysSel'], + 0xC1: ['Enable Device Type X', 'EnTyp'], + 0xC3: ['DTR1 = DATA', 'DTR1'], + 0xC5: ['DTR2 = DATA', 'DTR2'], + 0xC7: ['Write Memory Location', 'WRI'], +} + +# List of commands +DALICommands = { + 0x00: ['Immediate Off', 'IOFF'], + 0x01: ['Up 200ms', 'Up'], + 0x02: ['Down 200ms', 'Down'], + 0x03: ['Step Up', 'Step+'], + 0x04: ['Step Down', 'Step-'], + 0x05: ['Recall Maximum Level', 'Recall Max'], + 0x06: ['Recall Minimum Level', 'Recall Min'], + 0x07: ['Step down and off', 'Down Off'], + 0x08: ['Step ON and UP', 'On Up'], + 0x20: ['Reset', 'Rst'], + 0x21: ['Store Dim Level in DTR', 'Level -> DTR'], + 0x2A: ['Store DTR as Max Level', 'DTR->Max'], + 0x2B: ['Store DTR as Min Level', 'DTR->Min'], + 0x2C: ['Store DTR as Fail Level', 'DTR->Fail'], + 0x2D: ['Store DTR as Power On Level', 'DTR->Poweron'], + 0x2E: ['Store DTR as Fade Time', 'DTR->Fade'], + 0x2F: ['Store DTR as Fade Rate', 'DTR->Rate'], + 0x80: ['Store DTR as Short Address', 'DTR->Add'], + 0x81: ['Enable Memory Write', 'WEn'], + 0x90: ['Query Status', 'Status'], + 0x91: ['Query Ballast', 'Ballast'], + 0x92: ['Query Lamp Failure', 'LmpFail'], + 0x93: ['Query Power On', 'Power On'], + 0x94: ['Query Limit Error', 'Limit Err'], + 0x95: ['Query Reset', 'Reset State'], + 0x96: ['Query Missing Short Address', 'NoSrt'], + 0x97: ['Query Version', 'Ver'], + 0x98: ['Query DTR', 'GetDTR'], + 0x99: ['Query Device Type', 'Type'], + 0x9A: ['Query Physical Minimum', 'PhysMin'], + 0x9B: ['Query Power Fail', 'PowerFailed'], + 0x9C: ['Query DTR1', 'GetDTR1'], + 0x9D: ['Query DTR2', 'GetDTR2'], + 0xA0: ['Query Level', 'GetLevel'], + 0xA1: ['Query Max Level', 'GetMax'], + 0xA2: ['Query Min Level', 'GetMin'], + 0xA3: ['Query Power On', 'GetPwrOn'], + 0xA4: ['Query Fail Level', 'GetFail'], + 0xA5: ['Query Fade Rate', 'GetRate'], + 0xA6: ['Query Power Fail', 'PwrFail'], + 0xC0: ['Query Groups 0-7', 'GetGrpsL'], + 0xC1: ['Query Groups 7-15', 'GetGrpsH'], + 0xC2: ['Query BRNH', 'BRNH'], + 0xC3: ['Query BRNM', 'BRNM'], + 0xC4: ['Query BRNL', 'BRNL'], + 0xC5: ['Query Memory', 'GetMem'], +} + +# DALI device type 8 +DALIDeviceType8 = { + 0xE0: ['Set Temp X-Y Coordinate', 'Set X-Y'], + 0xE2: ['Activate Colour Set point', 'Activate SetPoint'], + 0xE7: ['Set Colour Temperature Tc', 'DTRs->ColTemp'], + 0xF9: ['Query Features', 'QryFeats'], + 0xFA: ['Query Current Setpoint Colour', 'GetSetPoint'], +} |