Move common/ directory into decoders/.

This simplifies cross-platform handling of the Python/decoder paths
and module installation/dist a bit and also fixes bug #804.

2 files changed, 212 insertions, 0 deletions

diff --git a/decoders/common/plugtrx/__init__.py b/decoders/common/plugtrx/__init__.py
new file mode 100644
index 0000000..8dd0822
--- /dev/null
+++ b/decoders/common/plugtrx/__init__.py
@@ -0,0 +1,20 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2016 Bert Vermeulen <bert@biot.com>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 3 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
+##
+
+from .mod import *
diff --git a/decoders/common/plugtrx/mod.py b/decoders/common/plugtrx/mod.py
new file mode 100644
index 0000000..3d1b66d
--- /dev/null
+++ b/decoders/common/plugtrx/mod.py
@@ -0,0 +1,192 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2016 Bert Vermeulen <bert@biot.com>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 3 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
+##
+
+# This module contains definitions for use by pluggable network adapters,
+# such as SFP, XFP etc.
+
+MODULE_ID = {
+    0x01: 'GBIC',
+    0x02: 'Integrated module/connector',
+    0x03: 'SFP',
+    0x04: '300-pin XBI',
+    0x05: 'XENPAK',
+    0x06: 'XFP',
+    0x07: 'XFF',
+    0x08: 'XFP-E',
+    0x09: 'XPAK',
+    0x0a: 'X2',
+}
+
+ALARM_THRESHOLDS = {
+    0:  'Temp high alarm',
+    2:  'Temp low alarm',
+    4:  'Temp high warning',
+    6:  'Temp low warning',
+    16: 'Bias high alarm',
+    18: 'Bias low alarm',
+    20: 'Bias high warning',
+    22: 'Bias low warning',
+    24: 'TX power high alarm',
+    26: 'TX power low alarm',
+    28: 'TX power high warning',
+    30: 'TX power low warning',
+    32: 'RX power high alarm',
+    34: 'RX power low alarm',
+    36: 'RX power high warning',
+    38: 'RX power low warning',
+    40: 'AUX 1 high alarm',
+    42: 'AUX 1 low alarm',
+    44: 'AUX 1 high warning',
+    46: 'AUX 1 low warning',
+    48: 'AUX 2 high alarm',
+    50: 'AUX 2 low alarm',
+    52: 'AUX 2 high warning',
+    54: 'AUX 2 low warning',
+}
+
+AD_READOUTS = {
+    0:  'Module temperature',
+    4:  'TX bias current',
+    6:  'Measured TX output power',
+    8:  'Measured RX input power',
+    10: 'AUX 1 measurement',
+    12: 'AUX 2 measurement',
+}
+
+GCS_BITS = [
+    'TX disable',
+    'Soft TX disable',
+    'MOD_NR',
+    'P_Down',
+    'Soft P_Down',
+    'Interrupt',
+    'RX_LOS',
+    'Data_Not_Ready',
+    'TX_NR',
+    'TX_Fault',
+    'TX_CDR not locked',
+    'RX_NR',
+    'RX_CDR not locked',
+]
+
+CONNECTOR = {
+    0x01:   'SC',
+    0x02:   'Fibre Channel style 1 copper',
+    0x03:   'Fibre Channel style 2 copper',
+    0x04:   'BNC/TNC',
+    0x05:   'Fibre Channel coax',
+    0x06:   'FiberJack',
+    0x07:   'LC',
+    0x08:   'MT-RJ',
+    0x09:   'MU',
+    0x0a:   'SG',
+    0x0b:   'Optical pigtail',
+    0x20:   'HSSDC II',
+    0x21:   'Copper pigtail',
+}
+
+TRANSCEIVER = [
+    # 10GB Ethernet
+    ['10GBASE-SR', '10GBASE-LR', '10GBASE-ER', '10GBASE-LRM', '10GBASE-SW',
+        '10GBASE-LW',   '10GBASE-EW'],
+    # 10GB Fibre Channel
+    ['1200-MX-SN-I', '1200-SM-LL-L', 'Extended Reach 1550 nm',
+        'Intermediate reach 1300 nm FP'],
+    # 10GB Copper
+    [],
+    # 10GB low speed
+    ['1000BASE-SX / 1xFC MMF', '1000BASE-LX / 1xFC SMF', '2xFC MMF',
+        '2xFC SMF', 'OC48-SR', 'OC48-IR', 'OC48-LR'],
+    # 10GB SONET/SDH interconnect
+    ['I-64.1r', 'I-64.1', 'I-64.2r', 'I-64.2', 'I-64.3', 'I-64.5'],
+    # 10GB SONET/SDH short haul
+    ['S-64.1', 'S-64.2a', 'S-64.2b', 'S-64.3a', 'S-64.3b', 'S-64.5a', 'S-64.5b'],
+    # 10GB SONET/SDH long haul
+    ['L-64.1', 'L-64.2a', 'L-64.2b', 'L-64.2c', 'L-64.3', 'G.959.1 P1L1-2D2'],
+    # 10GB SONET/SDH very long haul
+    ['V-64.2a', 'V-64.2b', 'V-64.3'],
+]
+
+SERIAL_ENCODING = [
+    '64B/66B',
+    '8B/10B',
+    'SONET scrambled',
+    'NRZ',
+    'RZ',
+]
+
+XMIT_TECH = [
+    '850 nm VCSEL',
+    '1310 nm VCSEL',
+    '1550 nm VCSEL',
+    '1310 nm FP',
+    '1310 nm DFB',
+    '1550 nm DFB',
+    '1310 nm EML'
+    '1550 nm EML'
+    'copper',
+]
+
+CDR = [
+    '9.95Gb/s',
+    '10.3Gb/s',
+    '10.5Gb/s',
+    '10.7Gb/s',
+    '11.1Gb/s',
+    '(unknown)',
+    'lineside loopback mode',
+    'XFI loopback mode',
+]
+
+DEVICE_TECH = [
+    ['no wavelength control', 'sctive wavelength control'],
+    ['uncooled transmitter device', 'cooled transmitter'],
+    ['PIN detector', 'APD detector'],
+    ['transmitter not tunable', 'transmitter tunable'],
+]
+
+ENHANCED_OPTS = [
+    'VPS',
+    'soft TX_DISABLE',
+    'soft P_Down',
+    'VPS LV regulator mode',
+    'VPS bypassed regulator mode',
+    'active FEC control',
+    'wavelength tunability',
+    'CMU',
+]
+
+AUX_TYPES = [
+    'not implemented',
+    'APD bias voltage',
+    '(unknown)',
+    'TEC current',
+    'laser temperature',
+    'laser wavelength',
+    '5V supply voltage',
+    '3.3V supply voltage',
+    '1.8V supply voltage',
+    '-5.2V supply voltage',
+    '5V supply current',
+    '(unknown)',
+    '(unknown)',
+    '3.3V supply current',
+    '1.8V supply current',
+    '-5.2V supply current',
+]