Consistently use ' instead of " for strings in all PDs.

1 files changed, 116 insertions, 116 deletions

diff --git a/common/plugtrx/mod.py b/common/plugtrx/mod.py
index f66c271..3d1b66d 100644
--- a/common/plugtrx/mod.py
+++ b/common/plugtrx/mod.py
@@ -34,159 +34,159 @@ MODULE_ID = {
 }
 
 ALARM_THRESHOLDS = {
-    0:  "Temp high alarm",
-    2:  "Temp low alarm",
-    4:  "Temp high warning",
-    6:  "Temp low warning",
-    16: "Bias high alarm",
-    18: "Bias low alarm",
-    20: "Bias high warning",
-    22: "Bias low warning",
-    24: "TX power high alarm",
-    26: "TX power low alarm",
-    28: "TX power high warning",
-    30: "TX power low warning",
-    32: "RX power high alarm",
-    34: "RX power low alarm",
-    36: "RX power high warning",
-    38: "RX power low warning",
-    40: "AUX 1 high alarm",
-    42: "AUX 1 low alarm",
-    44: "AUX 1 high warning",
-    46: "AUX 1 low warning",
-    48: "AUX 2 high alarm",
-    50: "AUX 2 low alarm",
-    52: "AUX 2 high warning",
-    54: "AUX 2 low warning",
+    0:  'Temp high alarm',
+    2:  'Temp low alarm',
+    4:  'Temp high warning',
+    6:  'Temp low warning',
+    16: 'Bias high alarm',
+    18: 'Bias low alarm',
+    20: 'Bias high warning',
+    22: 'Bias low warning',
+    24: 'TX power high alarm',
+    26: 'TX power low alarm',
+    28: 'TX power high warning',
+    30: 'TX power low warning',
+    32: 'RX power high alarm',
+    34: 'RX power low alarm',
+    36: 'RX power high warning',
+    38: 'RX power low warning',
+    40: 'AUX 1 high alarm',
+    42: 'AUX 1 low alarm',
+    44: 'AUX 1 high warning',
+    46: 'AUX 1 low warning',
+    48: 'AUX 2 high alarm',
+    50: 'AUX 2 low alarm',
+    52: 'AUX 2 high warning',
+    54: 'AUX 2 low warning',
 }
 
 AD_READOUTS = {
-    0:  "Module temperature",
-    4:  "TX bias current",
-    6:  "Measured TX output power",
-    8:  "Measured RX input power",
-    10: "AUX 1 measurement",
-    12: "AUX 2 measurement",
+    0:  'Module temperature',
+    4:  'TX bias current',
+    6:  'Measured TX output power',
+    8:  'Measured RX input power',
+    10: 'AUX 1 measurement',
+    12: 'AUX 2 measurement',
 }
 
 GCS_BITS = [
-    "TX disable",
-    "Soft TX disable",
-    "MOD_NR",
-    "P_Down",
-    "Soft P_Down",
-    "Interrupt",
-    "RX_LOS",
-    "Data_Not_Ready",
-    "TX_NR",
-    "TX_Fault",
-    "TX_CDR not locked",
-    "RX_NR",
-    "RX_CDR not locked",
+    'TX disable',
+    'Soft TX disable',
+    'MOD_NR',
+    'P_Down',
+    'Soft P_Down',
+    'Interrupt',
+    'RX_LOS',
+    'Data_Not_Ready',
+    'TX_NR',
+    'TX_Fault',
+    'TX_CDR not locked',
+    'RX_NR',
+    'RX_CDR not locked',
 ]
 
 CONNECTOR = {
-    0x01:   "SC",
-    0x02:   "Fibre Channel style 1 copper",
-    0x03:   "Fibre Channel style 2 copper",
-    0x04:   "BNC/TNC",
-    0x05:   "Fibre Channel coax",
-    0x06:   "FiberJack",
-    0x07:   "LC",
-    0x08:   "MT-RJ",
-    0x09:   "MU",
-    0x0a:   "SG",
-    0x0b:   "Optical pigtail",
-    0x20:   "HSSDC II",
-    0x21:   "Copper pigtail",
+    0x01:   'SC',
+    0x02:   'Fibre Channel style 1 copper',
+    0x03:   'Fibre Channel style 2 copper',
+    0x04:   'BNC/TNC',
+    0x05:   'Fibre Channel coax',
+    0x06:   'FiberJack',
+    0x07:   'LC',
+    0x08:   'MT-RJ',
+    0x09:   'MU',
+    0x0a:   'SG',
+    0x0b:   'Optical pigtail',
+    0x20:   'HSSDC II',
+    0x21:   'Copper pigtail',
 }
 
 TRANSCEIVER = [
     # 10GB Ethernet
-    ["10GBASE-SR", "10GBASE-LR", "10GBASE-ER", "10GBASE-LRM", "10GBASE-SW",
-        "10GBASE-LW",   "10GBASE-EW"],
+    ['10GBASE-SR', '10GBASE-LR', '10GBASE-ER', '10GBASE-LRM', '10GBASE-SW',
+        '10GBASE-LW',   '10GBASE-EW'],
     # 10GB Fibre Channel
-    ["1200-MX-SN-I", "1200-SM-LL-L", "Extended Reach 1550 nm",
-        "Intermediate reach 1300 nm FP"],
+    ['1200-MX-SN-I', '1200-SM-LL-L', 'Extended Reach 1550 nm',
+        'Intermediate reach 1300 nm FP'],
     # 10GB Copper
     [],
     # 10GB low speed
-    ["1000BASE-SX / 1xFC MMF", "1000BASE-LX / 1xFC SMF", "2xFC MMF",
-        "2xFC SMF", "OC48-SR", "OC48-IR", "OC48-LR"],
+    ['1000BASE-SX / 1xFC MMF', '1000BASE-LX / 1xFC SMF', '2xFC MMF',
+        '2xFC SMF', 'OC48-SR', 'OC48-IR', 'OC48-LR'],
     # 10GB SONET/SDH interconnect
-    ["I-64.1r", "I-64.1", "I-64.2r", "I-64.2", "I-64.3", "I-64.5"],
+    ['I-64.1r', 'I-64.1', 'I-64.2r', 'I-64.2', 'I-64.3', 'I-64.5'],
     # 10GB SONET/SDH short haul
-    ["S-64.1", "S-64.2a", "S-64.2b", "S-64.3a", "S-64.3b", "S-64.5a", "S-64.5b"],
+    ['S-64.1', 'S-64.2a', 'S-64.2b', 'S-64.3a', 'S-64.3b', 'S-64.5a', 'S-64.5b'],
     # 10GB SONET/SDH long haul
-    ["L-64.1", "L-64.2a", "L-64.2b", "L-64.2c", "L-64.3", "G.959.1 P1L1-2D2"],
+    ['L-64.1', 'L-64.2a', 'L-64.2b', 'L-64.2c', 'L-64.3', 'G.959.1 P1L1-2D2'],
     # 10GB SONET/SDH very long haul
-    ["V-64.2a", "V-64.2b", "V-64.3"],
+    ['V-64.2a', 'V-64.2b', 'V-64.3'],
 ]
 
 SERIAL_ENCODING = [
-    "64B/66B",
-    "8B/10B",
-    "SONET scrambled",
-    "NRZ",
-    "RZ",
+    '64B/66B',
+    '8B/10B',
+    'SONET scrambled',
+    'NRZ',
+    'RZ',
 ]
 
 XMIT_TECH = [
-    "850 nm VCSEL",
-    "1310 nm VCSEL",
-    "1550 nm VCSEL",
-    "1310 nm FP",
-    "1310 nm DFB",
-    "1550 nm DFB",
-    "1310 nm EML"
-    "1550 nm EML"
-    "copper",
+    '850 nm VCSEL',
+    '1310 nm VCSEL',
+    '1550 nm VCSEL',
+    '1310 nm FP',
+    '1310 nm DFB',
+    '1550 nm DFB',
+    '1310 nm EML'
+    '1550 nm EML'
+    'copper',
 ]
 
 CDR = [
-    "9.95Gb/s",
-    "10.3Gb/s",
-    "10.5Gb/s",
-    "10.7Gb/s",
-    "11.1Gb/s",
-    "(unknown)",
-    "lineside loopback mode",
-    "XFI loopback mode",
+    '9.95Gb/s',
+    '10.3Gb/s',
+    '10.5Gb/s',
+    '10.7Gb/s',
+    '11.1Gb/s',
+    '(unknown)',
+    'lineside loopback mode',
+    'XFI loopback mode',
 ]
 
 DEVICE_TECH = [
-    ["no wavelength control", "sctive wavelength control"],
-    ["uncooled transmitter device", "cooled transmitter"],
-    ["PIN detector", "APD detector"],
-    ["transmitter not tunable", "transmitter tunable"],
+    ['no wavelength control', 'sctive wavelength control'],
+    ['uncooled transmitter device', 'cooled transmitter'],
+    ['PIN detector', 'APD detector'],
+    ['transmitter not tunable', 'transmitter tunable'],
 ]
 
 ENHANCED_OPTS = [
-    "VPS",
-    "soft TX_DISABLE",
-    "soft P_Down",
-    "VPS LV regulator mode",
-    "VPS bypassed regulator mode",
-    "active FEC control",
-    "wavelength tunability",
-    "CMU",
+    'VPS',
+    'soft TX_DISABLE',
+    'soft P_Down',
+    'VPS LV regulator mode',
+    'VPS bypassed regulator mode',
+    'active FEC control',
+    'wavelength tunability',
+    'CMU',
 ]
 
 AUX_TYPES = [
-    "not implemented",
-    "APD bias voltage",
-    "(unknown)",
-    "TEC current",
-    "laser temperature",
-    "laser wavelength",
-    "5V supply voltage",
-    "3.3V supply voltage",
-    "1.8V supply voltage",
-    "-5.2V supply voltage",
-    "5V supply current",
-    "(unknown)",
-    "(unknown)",
-    "3.3V supply current",
-    "1.8V supply current",
-    "-5.2V supply current",
+    'not implemented',
+    'APD bias voltage',
+    '(unknown)',
+    'TEC current',
+    'laser temperature',
+    'laser wavelength',
+    '5V supply voltage',
+    '3.3V supply voltage',
+    '1.8V supply voltage',
+    '-5.2V supply voltage',
+    '5V supply current',
+    '(unknown)',
+    '(unknown)',
+    '3.3V supply current',
+    '1.8V supply current',
+    '-5.2V supply current',
 ]