Factor out SD card lists into common/sdcard.

These are used by the sdcard_spi and sdcard_sd decoders.

2 files changed, 207 insertions, 0 deletions

diff --git a/common/sdcard/__init__.py b/common/sdcard/__init__.py
new file mode 100644
index 0000000..cf09d9d
--- /dev/null
+++ b/common/sdcard/__init__.py
@@ -0,0 +1,21 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2012-2014 Uwe Hermann <uwe@hermann-uwe.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+from .mod import *
diff --git a/common/sdcard/mod.py b/common/sdcard/mod.py
new file mode 100644
index 0000000..f553cf1
--- /dev/null
+++ b/common/sdcard/mod.py
@@ -0,0 +1,186 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2012-2014 Uwe Hermann <uwe@hermann-uwe.de>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+# Normal commands (CMD)
+# Unlisted items are 'Reserved' as per SD spec. The 'Unknown' items don't
+# seem to be mentioned in the spec, but aren't marked as reserved either.
+cmd_names = {
+    0:  'GO_IDLE_STATE',
+    1:  'SEND_OP_COND', # Reserved in SD mode
+    2:  'ALL_SEND_CID',
+    3:  'SEND_RELATIVE_ADDR',
+    4:  'SET_DSR',
+    5:  'IO_SEND_OP_COND', # SDIO-only
+    6:  'SWITCH_FUNC', # New since spec 1.10
+    7:  'SELECT/DESELECT_CARD',
+    8:  'SEND_IF_COND',
+    9:  'SEND_CSD',
+    10: 'SEND_CID',
+    11: 'VOLTAGE_SWITCH',
+    12: 'STOP_TRANSMISSION',
+    13: 'SEND_STATUS',
+    # 14: Reserved
+    15: 'GO_INACTIVE_STATE',
+    16: 'SET_BLOCKLEN',
+    17: 'READ_SINGLE_BLOCK',
+    18: 'READ_MULTIPLE_BLOCK',
+    19: 'SEND_TUNING_BLOCK',
+    20: 'SPEED_CLASS_CONTROL',
+    # 21-22: Reserved
+    23: 'SET_BLOCK_COUNT',
+    24: 'WRITE_BLOCK',
+    25: 'WRITE_MULTIPLE_BLOCK',
+    26: 'Reserved for manufacturer',
+    27: 'PROGRAM_CSD',
+    28: 'SET_WRITE_PROT',
+    29: 'CLR_WRITE_PROT',
+    30: 'SEND_WRITE_PROT',
+    # 31: Reserved
+    32: 'ERASE_WR_BLK_START', # SPI mode: ERASE_WR_BLK_START_ADDR
+    33: 'ERASE_WR_BLK_END', # SPI mode: ERASE_WR_BLK_END_ADDR
+    34: 'Reserved for CMD6', # New since spec 1.10
+    35: 'Reserved for CMD6', # New since spec 1.10
+    36: 'Reserved for CMD6', # New since spec 1.10
+    37: 'Reserved for CMD6', # New since spec 1.10
+    38: 'ERASE',
+    # 39: Reserved
+    40: 'Reserved for security specification',
+    # 41: Reserved
+    42: 'LOCK_UNLOCK',
+    # 43-49: Reserved
+    50: 'Reserved for CMD6', # New since spec 1.10
+    # 51: Reserved
+    52: 'IO_RW_DIRECT', # SDIO-only
+    53: 'IO_RW_EXTENDED', # SDIO-only
+    54: 'Unknown',
+    55: 'APP_CMD',
+    56: 'GEN_CMD',
+    57: 'Reserved for CMD6', # New since spec 1.10
+    58: 'READ_OCR', # Reserved in SD mode
+    59: 'CRC_ON_OFF', # Reserved in SD mode
+    60: 'Reserved for manufacturer',
+    61: 'Reserved for manufacturer',
+    62: 'Reserved for manufacturer',
+    63: 'Reserved for manufacturer',
+}
+
+# Application-specific commands (ACMD)
+# Unlisted items are 'Reserved' as per SD spec. The 'Unknown' items don't
+# seem to be mentioned in the spec, but aren't marked as reserved either.
+acmd_names = {
+    # 1-5: Reserved
+    6:  'SET_BUS_WIDTH',
+    # 7-12: Reserved
+    13: 'SD_STATUS',
+    14: 'Reserved for Security Application',
+    15: 'Reserved for Security Application',
+    16: 'Reserved for Security Application',
+    # 17: Reserved
+    18: 'Reserved for SD security applications',
+    # 19-21: Reserved
+    22: 'SEND_NUM_WR_BLOCKS',
+    23: 'SET_WR_BLK_ERASE_COUNT',
+    # 24: Reserved
+    25: 'Reserved for SD security applications',
+    26: 'Reserved for SD security applications',
+    27: 'Reserved for security specification',
+    28: 'Reserved for security specification',
+    # 29: Reserved
+    30: 'Reserved for security specification',
+    31: 'Reserved for security specification',
+    32: 'Reserved for security specification',
+    33: 'Reserved for security specification',
+    34: 'Reserved for security specification',
+    35: 'Reserved for security specification',
+    # 36-37: Reserved
+    38: 'Reserved for SD security applications',
+    # 39-40: Reserved
+    41: 'SD_SEND_OP_COND',
+    42: 'SET_CLR_CARD_DETECT',
+    43: 'Reserved for SD security applications',
+    44: 'Reserved for SD security applications',
+    45: 'Reserved for SD security applications',
+    46: 'Reserved for SD security applications',
+    47: 'Reserved for SD security applications',
+    48: 'Reserved for SD security applications',
+    49: 'Reserved for SD security applications',
+    50: 'Unknown',
+    51: 'SEND_SCR',
+    52: 'Reserved for security specification',
+    53: 'Reserved for security specification',
+    54: 'Reserved for security specification',
+    55: 'Non-existant', # Doesn't exist (equivalent to CMD55)
+    56: 'Reserved for security specification',
+    57: 'Reserved for security specification',
+    58: 'Reserved for security specification',
+    59: 'Reserved for security specification',
+    60: 'Unknown',
+    61: 'Unknown',
+    62: 'Unknown',
+    63: 'Unknown',
+}
+
+accepted_voltages = {
+    0b0001: '2.7-3.6V',
+    0b0010: 'reserved for low voltage range',
+    0b0100: 'reserved',
+    0b1000: 'reserved',
+    # All other values: "not defined".
+}
+
+card_status = {
+    0:  'Reserved for manufacturer test mode',
+    1:  'Reserved for manufacturer test mode',
+    2:  'Reserved for application specific commands',
+    3:  'AKE_SEQ_ERROR',
+    4:  'Reserved for SDIO card',
+    5:  'APP_CMD',
+    6:  'Unknown',
+    7:  'Unknown',
+    8:  'READY_FOR_DATA',
+    9:  'CURRENT_STATE', # CURRENT_STATE is a 4-bit value (decimal: 0..15).
+    10: 'CURRENT_STATE',
+    11: 'CURRENT_STATE',
+    12: 'CURRENT_STATE',
+    13: 'ERASE_RESET',
+    14: 'CARD_ECC_DISABLED',
+    15: 'WP_ERASE_SKIP',
+    16: 'CSD_OVERWRITE',
+    17: 'Reserved for DEFERRED_RESPONSE', # See eSD addendum
+    18: 'Reserved',
+    19: 'ERROR',
+    20: 'CC_ERROR',
+    21: 'CARD_ECC_FAILED',
+    22: 'ILLEGAL_COMMAND',
+    23: 'COM_CRC_ERROR',
+    24: 'LOCK_UNLOCK_FAILED',
+    25: 'CARD_IS_LOCKED',
+    26: 'WP_VIOLATION',
+    27: 'ERASE_PARAM',
+    28: 'ERASE_SEQ_ERROR',
+    29: 'BLOCK_LEN_ERROR',
+    30: 'ADDRESS_ERROR',
+    31: 'OUT_OF_RANGE',
+}
+
+sd_status = {
+    # 311:0: Reserved for manufacturer
+    # 391:312: Reserved
+}