Move constants out of xfp to common/plugtrx.

2 files changed, 195 insertions, 171 deletions

diff --git a/common/plugtrx.py b/common/plugtrx.py
new file mode 100644
index 0000000..f66c271
--- /dev/null
+++ b/common/plugtrx.py
@@ -0,0 +1,192 @@
+##
+## This file is part of the libsigrokdecode project.
+##
+## Copyright (C) 2016 Bert Vermeulen <bert@biot.com>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 3 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, see <http://www.gnu.org/licenses/>.
+##
+
+# This module contains definitions for use by pluggable network adapters,
+# such as SFP, XFP etc.
+
+MODULE_ID = {
+    0x01: 'GBIC',
+    0x02: 'Integrated module/connector',
+    0x03: 'SFP',
+    0x04: '300-pin XBI',
+    0x05: 'XENPAK',
+    0x06: 'XFP',
+    0x07: 'XFF',
+    0x08: 'XFP-E',
+    0x09: 'XPAK',
+    0x0a: 'X2',
+}
+
+ALARM_THRESHOLDS = {
+    0:  "Temp high alarm",
+    2:  "Temp low alarm",
+    4:  "Temp high warning",
+    6:  "Temp low warning",
+    16: "Bias high alarm",
+    18: "Bias low alarm",
+    20: "Bias high warning",
+    22: "Bias low warning",
+    24: "TX power high alarm",
+    26: "TX power low alarm",
+    28: "TX power high warning",
+    30: "TX power low warning",
+    32: "RX power high alarm",
+    34: "RX power low alarm",
+    36: "RX power high warning",
+    38: "RX power low warning",
+    40: "AUX 1 high alarm",
+    42: "AUX 1 low alarm",
+    44: "AUX 1 high warning",
+    46: "AUX 1 low warning",
+    48: "AUX 2 high alarm",
+    50: "AUX 2 low alarm",
+    52: "AUX 2 high warning",
+    54: "AUX 2 low warning",
+}
+
+AD_READOUTS = {
+    0:  "Module temperature",
+    4:  "TX bias current",
+    6:  "Measured TX output power",
+    8:  "Measured RX input power",
+    10: "AUX 1 measurement",
+    12: "AUX 2 measurement",
+}
+
+GCS_BITS = [
+    "TX disable",
+    "Soft TX disable",
+    "MOD_NR",
+    "P_Down",
+    "Soft P_Down",
+    "Interrupt",
+    "RX_LOS",
+    "Data_Not_Ready",
+    "TX_NR",
+    "TX_Fault",
+    "TX_CDR not locked",
+    "RX_NR",
+    "RX_CDR not locked",
+]
+
+CONNECTOR = {
+    0x01:   "SC",
+    0x02:   "Fibre Channel style 1 copper",
+    0x03:   "Fibre Channel style 2 copper",
+    0x04:   "BNC/TNC",
+    0x05:   "Fibre Channel coax",
+    0x06:   "FiberJack",
+    0x07:   "LC",
+    0x08:   "MT-RJ",
+    0x09:   "MU",
+    0x0a:   "SG",
+    0x0b:   "Optical pigtail",
+    0x20:   "HSSDC II",
+    0x21:   "Copper pigtail",
+}
+
+TRANSCEIVER = [
+    # 10GB Ethernet
+    ["10GBASE-SR", "10GBASE-LR", "10GBASE-ER", "10GBASE-LRM", "10GBASE-SW",
+        "10GBASE-LW",   "10GBASE-EW"],
+    # 10GB Fibre Channel
+    ["1200-MX-SN-I", "1200-SM-LL-L", "Extended Reach 1550 nm",
+        "Intermediate reach 1300 nm FP"],
+    # 10GB Copper
+    [],
+    # 10GB low speed
+    ["1000BASE-SX / 1xFC MMF", "1000BASE-LX / 1xFC SMF", "2xFC MMF",
+        "2xFC SMF", "OC48-SR", "OC48-IR", "OC48-LR"],
+    # 10GB SONET/SDH interconnect
+    ["I-64.1r", "I-64.1", "I-64.2r", "I-64.2", "I-64.3", "I-64.5"],
+    # 10GB SONET/SDH short haul
+    ["S-64.1", "S-64.2a", "S-64.2b", "S-64.3a", "S-64.3b", "S-64.5a", "S-64.5b"],
+    # 10GB SONET/SDH long haul
+    ["L-64.1", "L-64.2a", "L-64.2b", "L-64.2c", "L-64.3", "G.959.1 P1L1-2D2"],
+    # 10GB SONET/SDH very long haul
+    ["V-64.2a", "V-64.2b", "V-64.3"],
+]
+
+SERIAL_ENCODING = [
+    "64B/66B",
+    "8B/10B",
+    "SONET scrambled",
+    "NRZ",
+    "RZ",
+]
+
+XMIT_TECH = [
+    "850 nm VCSEL",
+    "1310 nm VCSEL",
+    "1550 nm VCSEL",
+    "1310 nm FP",
+    "1310 nm DFB",
+    "1550 nm DFB",
+    "1310 nm EML"
+    "1550 nm EML"
+    "copper",
+]
+
+CDR = [
+    "9.95Gb/s",
+    "10.3Gb/s",
+    "10.5Gb/s",
+    "10.7Gb/s",
+    "11.1Gb/s",
+    "(unknown)",
+    "lineside loopback mode",
+    "XFI loopback mode",
+]
+
+DEVICE_TECH = [
+    ["no wavelength control", "sctive wavelength control"],
+    ["uncooled transmitter device", "cooled transmitter"],
+    ["PIN detector", "APD detector"],
+    ["transmitter not tunable", "transmitter tunable"],
+]
+
+ENHANCED_OPTS = [
+    "VPS",
+    "soft TX_DISABLE",
+    "soft P_Down",
+    "VPS LV regulator mode",
+    "VPS bypassed regulator mode",
+    "active FEC control",
+    "wavelength tunability",
+    "CMU",
+]
+
+AUX_TYPES = [
+    "not implemented",
+    "APD bias voltage",
+    "(unknown)",
+    "TEC current",
+    "laser temperature",
+    "laser wavelength",
+    "5V supply voltage",
+    "3.3V supply voltage",
+    "1.8V supply voltage",
+    "-5.2V supply voltage",
+    "5V supply current",
+    "(unknown)",
+    "(unknown)",
+    "3.3V supply current",
+    "1.8V supply current",
+    "-5.2V supply current",
+]
diff --git a/decoders/xfp/pd.py b/decoders/xfp/pd.py
index 41aca0d..1e971e6 100644
--- a/decoders/xfp/pd.py
+++ b/decoders/xfp/pd.py
@@ -18,177 +18,9 @@
 ##
 
 import sigrokdecode as srd
-
-MODULE_ID = {
-    0x01: 'GBIC',
-    0x02: 'Integrated module/connector',
-    0x03: 'SFP',
-    0x04: '300-pin XBI',
-    0x05: 'XENPAK',
-    0x06: 'XFP',
-    0x07: 'XFF',
-    0x08: 'XFP-E',
-    0x09: 'XPAK',
-    0x0a: 'X2',
-}
-
-ALARM_THRESHOLDS = {
-    0:  "Temp high alarm",
-    2:  "Temp low alarm",
-    4:  "Temp high warning",
-    6:  "Temp low warning",
-    16: "Bias high alarm",
-    18: "Bias low alarm",
-    20: "Bias high warning",
-    22: "Bias low warning",
-    24: "TX power high alarm",
-    26: "TX power low alarm",
-    28: "TX power high warning",
-    30: "TX power low warning",
-    32: "RX power high alarm",
-    34: "RX power low alarm",
-    36: "RX power high warning",
-    38: "RX power low warning",
-    40: "AUX 1 high alarm",
-    42: "AUX 1 low alarm",
-    44: "AUX 1 high warning",
-    46: "AUX 1 low warning",
-    48: "AUX 2 high alarm",
-    50: "AUX 2 low alarm",
-    52: "AUX 2 high warning",
-    54: "AUX 2 low warning",
-}
-
-AD_READOUTS = {
-    0:  "Module temperature",
-    4:  "TX bias current",
-    6:  "Measured TX output power",
-    8:  "Measured RX input power",
-    10: "AUX 1 measurement",
-    12: "AUX 2 measurement",
-}
-
-GCS_BITS = [
-    "TX disable",
-    "Soft TX disable",
-    "MOD_NR",
-    "P_Down",
-    "Soft P_Down",
-    "Interrupt",
-    "RX_LOS",
-    "Data_Not_Ready",
-    "TX_NR",
-    "TX_Fault",
-    "TX_CDR not locked",
-    "RX_NR",
-    "RX_CDR not locked",
-]
-
-CONNECTOR = {
-    0x01:   "SC",
-    0x02:   "Fibre Channel style 1 copper",
-    0x03:   "Fibre Channel style 2 copper",
-    0x04:   "BNC/TNC",
-    0x05:   "Fibre Channel coax",
-    0x06:   "FiberJack",
-    0x07:   "LC",
-    0x08:   "MT-RJ",
-    0x09:   "MU",
-    0x0a:   "SG",
-    0x0b:   "Optical pigtail",
-    0x20:   "HSSDC II",
-    0x21:   "Copper pigtail",
-}
-
-TRANSCEIVER = [
-    # 10GB Ethernet
-    ["10GBASE-SR", "10GBASE-LR", "10GBASE-ER", "10GBASE-LRM", "10GBASE-SW",
-        "10GBASE-LW",   "10GBASE-EW"],
-    # 10GB Fibre Channel
-    ["1200-MX-SN-I", "1200-SM-LL-L", "Extended Reach 1550 nm",
-        "Intermediate reach 1300 nm FP"],
-    # 10GB Copper
-    [],
-    # 10GB low speed
-    ["1000BASE-SX / 1xFC MMF", "1000BASE-LX / 1xFC SMF", "2xFC MMF",
-        "2xFC SMF", "OC48-SR", "OC48-IR", "OC48-LR"],
-    # 10GB SONET/SDH interconnect
-    ["I-64.1r", "I-64.1", "I-64.2r", "I-64.2", "I-64.3", "I-64.5"],
-    # 10GB SONET/SDH short haul
-    ["S-64.1", "S-64.2a", "S-64.2b", "S-64.3a", "S-64.3b", "S-64.5a", "S-64.5b"],
-    # 10GB SONET/SDH long haul
-    ["L-64.1", "L-64.2a", "L-64.2b", "L-64.2c", "L-64.3", "G.959.1 P1L1-2D2"],
-    # 10GB SONET/SDH very long haul
-    ["V-64.2a", "V-64.2b", "V-64.3"],
-]
-
-SERIAL_ENCODING = [
-    "64B/66B",
-    "8B/10B",
-    "SONET scrambled",
-    "NRZ",
-    "RZ",
-]
-
-XMIT_TECH = [
-    "850 nm VCSEL",
-    "1310 nm VCSEL",
-    "1550 nm VCSEL",
-    "1310 nm FP",
-    "1310 nm DFB",
-    "1550 nm DFB",
-    "1310 nm EML"
-    "1550 nm EML"
-    "copper",
-]
-
-CDR = [
-    "9.95Gb/s",
-    "10.3Gb/s",
-    "10.5Gb/s",
-    "10.7Gb/s",
-    "11.1Gb/s",
-    "(unknown)",
-    "lineside loopback mode",
-    "XFI loopback mode",
-]
-
-DEVICE_TECH = [
-    ["no wavelength control", "sctive wavelength control"],
-    ["uncooled transmitter device", "cooled transmitter"],
-    ["PIN detector", "APD detector"],
-    ["transmitter not tunable", "transmitter tunable"],
-]
-
-ENHANCED_OPTS = [
-    "VPS",
-    "soft TX_DISABLE",
-    "soft P_Down",
-    "VPS LV regulator mode",
-    "VPS bypassed regulator mode",
-    "active FEC control",
-    "wavelength tunability",
-    "CMU",
-]
-
-AUX_TYPES = [
-    "not implemented",
-    "APD bias voltage",
-    "(unknown)",
-    "TEC current",
-    "laser temperature",
-    "laser wavelength",
-    "5V supply voltage",
-    "3.3V supply voltage",
-    "1.8V supply voltage",
-    "-5.2V supply voltage",
-    "5V supply current",
-    "(unknown)",
-    "(unknown)",
-    "3.3V supply current",
-    "1.8V supply current",
-    "-5.2V supply current",
-]
+from plugtrx import (MODULE_ID, ALARM_THRESHOLDS, AD_READOUTS, GCS_BITS,
+        CONNECTOR, TRANSCEIVER, SERIAL_ENCODING, XMIT_TECH, CDR, DEVICE_TECH,
+        ENHANCED_OPTS, AUX_TYPES)
 
 class Decoder(srd.Decoder):
     api_version = 2