diff options
Diffstat (limited to 'decoders/xfp/pd.py')
| -rw-r--r-- | decoders/xfp/pd.py | 174 |
1 files changed, 3 insertions, 171 deletions
diff --git a/decoders/xfp/pd.py b/decoders/xfp/pd.py index 41aca0d..1e971e6 100644 --- a/decoders/xfp/pd.py +++ b/decoders/xfp/pd.py @@ -18,177 +18,9 @@ ## import sigrokdecode as srd - -MODULE_ID = { - 0x01: 'GBIC', - 0x02: 'Integrated module/connector', - 0x03: 'SFP', - 0x04: '300-pin XBI', - 0x05: 'XENPAK', - 0x06: 'XFP', - 0x07: 'XFF', - 0x08: 'XFP-E', - 0x09: 'XPAK', - 0x0a: 'X2', -} - -ALARM_THRESHOLDS = { - 0: "Temp high alarm", - 2: "Temp low alarm", - 4: "Temp high warning", - 6: "Temp low warning", - 16: "Bias high alarm", - 18: "Bias low alarm", - 20: "Bias high warning", - 22: "Bias low warning", - 24: "TX power high alarm", - 26: "TX power low alarm", - 28: "TX power high warning", - 30: "TX power low warning", - 32: "RX power high alarm", - 34: "RX power low alarm", - 36: "RX power high warning", - 38: "RX power low warning", - 40: "AUX 1 high alarm", - 42: "AUX 1 low alarm", - 44: "AUX 1 high warning", - 46: "AUX 1 low warning", - 48: "AUX 2 high alarm", - 50: "AUX 2 low alarm", - 52: "AUX 2 high warning", - 54: "AUX 2 low warning", -} - -AD_READOUTS = { - 0: "Module temperature", - 4: "TX bias current", - 6: "Measured TX output power", - 8: "Measured RX input power", - 10: "AUX 1 measurement", - 12: "AUX 2 measurement", -} - -GCS_BITS = [ - "TX disable", - "Soft TX disable", - "MOD_NR", - "P_Down", - "Soft P_Down", - "Interrupt", - "RX_LOS", - "Data_Not_Ready", - "TX_NR", - "TX_Fault", - "TX_CDR not locked", - "RX_NR", - "RX_CDR not locked", -] - -CONNECTOR = { - 0x01: "SC", - 0x02: "Fibre Channel style 1 copper", - 0x03: "Fibre Channel style 2 copper", - 0x04: "BNC/TNC", - 0x05: "Fibre Channel coax", - 0x06: "FiberJack", - 0x07: "LC", - 0x08: "MT-RJ", - 0x09: "MU", - 0x0a: "SG", - 0x0b: "Optical pigtail", - 0x20: "HSSDC II", - 0x21: "Copper pigtail", -} - -TRANSCEIVER = [ - # 10GB Ethernet - ["10GBASE-SR", "10GBASE-LR", "10GBASE-ER", "10GBASE-LRM", "10GBASE-SW", - "10GBASE-LW", "10GBASE-EW"], - # 10GB Fibre Channel - ["1200-MX-SN-I", "1200-SM-LL-L", "Extended Reach 1550 nm", - "Intermediate reach 1300 nm FP"], - # 10GB Copper - [], - # 10GB low speed - ["1000BASE-SX / 1xFC MMF", "1000BASE-LX / 1xFC SMF", "2xFC MMF", - "2xFC SMF", "OC48-SR", "OC48-IR", "OC48-LR"], - # 10GB SONET/SDH interconnect - ["I-64.1r", "I-64.1", "I-64.2r", "I-64.2", "I-64.3", "I-64.5"], - # 10GB SONET/SDH short haul - ["S-64.1", "S-64.2a", "S-64.2b", "S-64.3a", "S-64.3b", "S-64.5a", "S-64.5b"], - # 10GB SONET/SDH long haul - ["L-64.1", "L-64.2a", "L-64.2b", "L-64.2c", "L-64.3", "G.959.1 P1L1-2D2"], - # 10GB SONET/SDH very long haul - ["V-64.2a", "V-64.2b", "V-64.3"], -] - -SERIAL_ENCODING = [ - "64B/66B", - "8B/10B", - "SONET scrambled", - "NRZ", - "RZ", -] - -XMIT_TECH = [ - "850 nm VCSEL", - "1310 nm VCSEL", - "1550 nm VCSEL", - "1310 nm FP", - "1310 nm DFB", - "1550 nm DFB", - "1310 nm EML" - "1550 nm EML" - "copper", -] - -CDR = [ - "9.95Gb/s", - "10.3Gb/s", - "10.5Gb/s", - "10.7Gb/s", - "11.1Gb/s", - "(unknown)", - "lineside loopback mode", - "XFI loopback mode", -] - -DEVICE_TECH = [ - ["no wavelength control", "sctive wavelength control"], - ["uncooled transmitter device", "cooled transmitter"], - ["PIN detector", "APD detector"], - ["transmitter not tunable", "transmitter tunable"], -] - -ENHANCED_OPTS = [ - "VPS", - "soft TX_DISABLE", - "soft P_Down", - "VPS LV regulator mode", - "VPS bypassed regulator mode", - "active FEC control", - "wavelength tunability", - "CMU", -] - -AUX_TYPES = [ - "not implemented", - "APD bias voltage", - "(unknown)", - "TEC current", - "laser temperature", - "laser wavelength", - "5V supply voltage", - "3.3V supply voltage", - "1.8V supply voltage", - "-5.2V supply voltage", - "5V supply current", - "(unknown)", - "(unknown)", - "3.3V supply current", - "1.8V supply current", - "-5.2V supply current", -] +from plugtrx import (MODULE_ID, ALARM_THRESHOLDS, AD_READOUTS, GCS_BITS, + CONNECTOR, TRANSCEIVER, SERIAL_ENCODING, XMIT_TECH, CDR, DEVICE_TECH, + ENHANCED_OPTS, AUX_TYPES) class Decoder(srd.Decoder): api_version = 2 |