Add support for initial pin settings.

Adapt all tests that require it to use the old behaviour of assuming an
initial pin value of 0 (or whatever was previously hardcoded in the PD).
for now (this will likely see some changes later).

6 files changed, 12 insertions, 12 deletions

diff --git a/decoder/test/ds1307/test.conf b/decoder/test/ds1307/test.conf
index 8bf0650..052ed5d 100644
--- a/decoder/test/ds1307/test.conf
+++ b/decoder/test/ds1307/test.conf
@@ -1,5 +1,5 @@
 test rtc_ds1307_200khz
-	protocol-decoder i2c channel scl=0 channel sda=1
+	protocol-decoder i2c channel scl=0 channel sda=1 initial_pin scl=1 initial_pin sda=1
 	protocol-decoder ds1307
 	stack i2c ds1307
 	input i2c/rtc_dallas_ds1307/rtc_ds1307_200khz.sr
diff --git a/decoder/test/i2c/test.conf b/decoder/test/i2c/test.conf
index ed5535f..c9e7e5e 100644
--- a/decoder/test/i2c/test.conf
+++ b/decoder/test/i2c/test.conf
@@ -1,5 +1,5 @@
 test rtc
-	protocol-decoder i2c channel scl=0 channel sda=1
+	protocol-decoder i2c channel scl=0 channel sda=1 initial_pin scl=1 initial_pin sda=1
 	input i2c/rtc_dallas_ds1307/rtc_ds1307_200khz.sr
 	output i2c annotation class data-read match rtc_ds1307_200khz_data_read.output
 	output i2c annotation class data-write match rtc_ds1307_200khz_data_write.output
diff --git a/decoder/test/jitter/test.conf b/decoder/test/jitter/test.conf
index 102938d..e61cb62 100644
--- a/decoder/test/jitter/test.conf
+++ b/decoder/test/jitter/test.conf
@@ -1,5 +1,5 @@
 test toim4243
-	protocol-decoder jitter channel clk=3 channel sig=2 option clk_polarity=falling option sig_polarity=falling
+	protocol-decoder jitter channel clk=3 channel sig=2 option clk_polarity=falling option sig_polarity=falling initial_pin clk=0
 	input uart/toim4243/toim4243_10byte_send_snippet.sr
 	output jitter annotation match toim4243.output
 	output jitter binary class ascii-float match toim4243.bin_ascii_float
diff --git a/decoder/test/parallel/test.conf b/decoder/test/parallel/test.conf
index b6dd18c..cf59c30 100644
--- a/decoder/test/parallel/test.conf
+++ b/decoder/test/parallel/test.conf
@@ -1,5 +1,5 @@
 test incremental_8ch_short_noclock
-	protocol-decoder parallel channel d0=0 channel d1=1 channel d2=2 channel d3=3 channel d4=4 channel d5=5 channel d6=6 channel d7=7
+	protocol-decoder parallel channel d0=0 channel d1=1 channel d2=2 channel d3=3 channel d4=4 channel d5=5 channel d6=6 channel d7=7 initial_pin d0=0 initial_pin d1=1 initial_pin d2=2
 	input misc/demo/incremental_8ch_short.sr
 	output parallel annotation match incremental_8ch_short_noclock.output
 	output parallel python match incremental_8ch_short_noclock.python
@@ -11,7 +11,7 @@ test incremental_8ch_short_clock
 	output parallel python match incremental_8ch_short_clock.python
 
 test incremental_8ch_long_noclock
-	protocol-decoder parallel channel d0=0 channel d1=1 channel d2=2 channel d3=3 channel d4=4 channel d5=5 channel d6=6 channel d7=7
+	protocol-decoder parallel channel d0=0 channel d1=1 channel d2=2 channel d3=3 channel d4=4 channel d5=5 channel d6=6 channel d7=7 initial_pin d0=0 initial_pin d1=1 initial_pin d2=2
 	input misc/demo/incremental_8ch_long.sr
 	output parallel annotation match incremental_8ch_long_noclock.output
 	output parallel python match incremental_8ch_long_noclock.python
diff --git a/decoder/test/spdif/test.conf b/decoder/test/spdif/test.conf
index cb63b0d..539f565 100644
--- a/decoder/test/spdif/test.conf
+++ b/decoder/test/spdif/test.conf
@@ -4,6 +4,6 @@ test exception_samplerate
 	output spdif exception match SamplerateError
 
 test 2ch-16bit-48khz
-	protocol-decoder spdif channel data=0
+	protocol-decoder spdif channel data=0 initial_pin data=0
 	input spdif/2ch-16bit-48khz/2ch-16bit-48khz.sr
 	output spdif annotation match 2ch-16bit-48khz.output
diff --git a/decoder/test/swd/test.conf b/decoder/test/swd/test.conf
index 95140bd..519a071 100644
--- a/decoder/test/swd/test.conf
+++ b/decoder/test/swd/test.conf
@@ -1,29 +1,29 @@
 test ftdi_openocd_init_write_0xabbabeeb
-	protocol-decoder swd channel swclk=0 channel swdio=1
+	protocol-decoder swd channel swclk=0 channel swdio=1 initial_pin swclk=0 initial_pin swdio=0
 	input swd/ftdi_openocd/init_write_0xabbabeeb.sr
 	output swd annotation match ftdi_openocd/init_write_0xabbabeeb.output
 	output swd python match ftdi_openocd/init_write_0xabbabeeb.python
 
 test ftdi_openocd_init_noreply
-	protocol-decoder swd channel swclk=0 channel swdio=1
+	protocol-decoder swd channel swclk=0 channel swdio=1 initial_pin swclk=0 initial_pin swdio=0
 	input swd/ftdi_openocd/init_noreply.sr
 	output swd annotation match ftdi_openocd/init_noreply.output
 	output swd python match ftdi_openocd/init_noreply.python
 
 test ftdi_openocd_init_wait_fault
-	protocol-decoder swd channel swclk=0 channel swdio=1
+	protocol-decoder swd channel swclk=0 channel swdio=1 initial_pin swclk=0 initial_pin swdio=0
 	input swd/ftdi_openocd/init_wait_fault.sr
 	output swd annotation match ftdi_openocd/init_wait_fault.output
 	output swd python match ftdi_openocd/init_wait_fault.python
 
 test stlink_init_write_0xabbabeeb
-	protocol-decoder swd channel swclk=0 channel swdio=1
+	protocol-decoder swd channel swclk=0 channel swdio=1 initial_pin swclk=0 initial_pin swdio=0
 	input swd/stlink_openocd/init_write_0xabbabeeb.sr
 	output swd annotation match stlink_openocd/init_write_0xabbabeeb.output
 	output swd python match stlink_openocd/init_write_0xabbabeeb.python
 
 test stlink_wait_retry
-	protocol-decoder swd channel swclk=0 channel swdio=1
+	protocol-decoder swd channel swclk=0 channel swdio=1 initial_pin swclk=0 initial_pin swdio=0
 	input swd/stlink_openocd/wait_retry.sr
 	output swd annotation match stlink_openocd/wait_retry.output
 	output swd python match stlink_openocd/wait_retry.python
@@ -31,7 +31,7 @@ test stlink_wait_retry
 # With the strict_start option set, this capture doesn't include a LINERESET
 # so output is empty.
 test stlink_wait_retry
-	protocol-decoder swd channel swclk=0 channel swdio=1 option strict_start=yes
+	protocol-decoder swd channel swclk=0 channel swdio=1 option strict_start=yes initial_pin swclk=0 initial_pin swdio=0
 	input swd/stlink_openocd/wait_retry.sr
 	output swd annotation match stlink_openocd/empty.output
 	output swd python match stlink_openocd/empty.python