summaryrefslogtreecommitdiff
path: root/uart/trekstor_ebr30_a/README
blob: c77de4c23cb90fb3d270b0983eaf8f6b5694b434 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
-------------------------------------------------------------------------------
TrekStor eBook Reader 3.0 UART
-------------------------------------------------------------------------------

This is an example capture of the serial (UART) bootloader/firmware output on
a TrekStor eBook Reader 3.0 EBR30-a (Weltbild + Hugendubel Edition).

For details on the device see:

  http://randomprojects.org/wiki/TrekStor_eBook_Reader_3.0_EBR30-a_(Weltbild_%2B_Hugendubel_Edition)

The firmware sends the debug output at 115200 baud, with 8n1 settings.


Logic analyzer setup
--------------------

The logic analyzer used for capturing is a ChronoVu LA8 at a sample rate
of 1MHz.

The ChronoVu LA8 probes were connected to the EBR30-a device like this:

  Probe       EBR30-a
  -------------------
  1 (orange)  TX
  GND         GND


Data
----

The sigrok command line used was:

  sigrok-cli -d 0:samplerate=1mhz --samples 8388608 \
             -p '1-8,2=TX' --wait-trigger --triggers 2=1 \
             -o trekstor_ebr30_a_uart.sr

The capturing starts when the TX signal is high for the first time (it's low
before the device is powered-on). We capture as many samples as fit into the
8MByte buffer of the logic analyzer.

The capture does not contain the complete bootloader/firmware output.

For the full log see:

  http://randomprojects.org/wiki/TrekStor_eBook_Reader_3.0_EBR30-a_%28Weltbild_%2B_Hugendubel_Edition%29#UART