diff options
Diffstat (limited to 'ook/oregon/wgr800')
| -rw-r--r-- | ook/oregon/wgr800/README | 38 | ||||
| -rw-r--r-- | ook/oregon/wgr800/oregon_wgr800.sr | bin | 0 -> 552 bytes |
2 files changed, 38 insertions, 0 deletions
diff --git a/ook/oregon/wgr800/README b/ook/oregon/wgr800/README new file mode 100644 index 0000000..cbc26fb --- /dev/null +++ b/ook/oregon/wgr800/README @@ -0,0 +1,38 @@ +------------------------------------------------------------------------------- +WGR800: OOK data +------------------------------------------------------------------------------- + +This is an example capture of an Oregon Scientific WGR800 wind sensor which +transmits at 433.92 MHz using Manchester encoding and amplitude modulation. + +The signal was received by an RF Solutions RX12 superhet decoder chip and then +passed to the logic analyser. + +In order to decode the Oregon v3 WGR800 you will need a preamble of '1111 ...' +(default) in the ook decoder. Currently you can ook decode either a preamble of +'1111 ...' or '1010 ...' but not both at the same time, so you can see Oregon +v2.1 or v1/3 sensors. + +Details: +http://www.oregonscientificstore.com/p-378-oregon-scientific-wgr800-oem-professional-wind-sensor-not-in-retail-packaging.aspx +https://www.rfsolutions.co.uk/downloads/1481732062DS-AM-RX12.pdf + + +Logic analyzer setup +-------------------- + +The logic analyzer used was a USBee AX Pro / Saleae Logic clone (at 25kHz): + + Probe RX12 + ---------------- + 0 OUT + 1 Output from Arduino running virtual BTHR968 + + +Data +---- + + * oregon_wgr800.sr: + Contains a single set of pulses that belong to an Oregon Scientific WGR800 + wind sensor. These should decode as channel 0, battery OK, rollingcode 5E, + direction NE(45deg), gust 3.3m/s, speed 2m/s, checksum OK. diff --git a/ook/oregon/wgr800/oregon_wgr800.sr b/ook/oregon/wgr800/oregon_wgr800.sr Binary files differnew file mode 100644 index 0000000..e2d594c --- /dev/null +++ b/ook/oregon/wgr800/oregon_wgr800.sr |