rfid: Add some EM4100, EM4102 and FK4100 dumps.

4 files changed, 32 insertions, 0 deletions

diff --git a/rfid/em4102/rdm630/README b/rfid/em4102/rdm630/README
new file mode 100644
index 0000000..9336734
--- /dev/null
+++ b/rfid/em4102/rdm630/README
@@ -0,0 +1,32 @@
+-------------------------------------------------------------------------------
+RDM630 125kHz RFID reader module
+-------------------------------------------------------------------------------
+
+This is a set of example captures of an RDM630 125kHz RFID reader module.
+
+Details:
+http://store.iteadstudio.com/index.php?main_page=product_info&cPath=16&products_id=7
+http://iteadstudio.com/store/images/produce/RFID/125KReader_W/RDM630-Spec.pdf
+http://www.seeedstudio.com/wiki/125Khz_RFID_module_-_UART
+http://www.priority1design.com.au/em4100_protocol.html
+
+
+Logic analyzer setup
+--------------------
+
+The logic analyzer used was a Saleae Logic (at 2MHz):
+
+  Probe       RDM630
+  ------------------
+  1           TX (P1 header, pin 1, UART)
+  2           RFID (ST Microelectronics SO-8 IC, pin 2)
+
+
+Data
+----
+
+The RFID tag hex values are encoded in the respective filenames.
+
+The files contain both the "raw" RFID signal (in Manchester, Biphase, or PSK
+encoding) as well as the UART output (9600/8n1) of the RDM630 module.
+
diff --git a/rfid/em4102/rdm630/em4102_1f0044de9c_card.sr b/rfid/em4102/rdm630/em4102_1f0044de9c_card.sr
new file mode 100644
index 0000000..95f86af
--- /dev/null
+++ b/rfid/em4102/rdm630/em4102_1f0044de9c_card.sr
diff --git a/rfid/em4102/rdm630/em4102_24003dab13_card.sr b/rfid/em4102/rdm630/em4102_24003dab13_card.sr
new file mode 100644
index 0000000..a7b2699
--- /dev/null
+++ b/rfid/em4102/rdm630/em4102_24003dab13_card.sr
diff --git a/rfid/em4102/rdm630/em4102_24003e8ad1_card.sr b/rfid/em4102/rdm630/em4102_24003e8ad1_card.sr
new file mode 100644
index 0000000..b532c19
--- /dev/null
+++ b/rfid/em4102/rdm630/em4102_24003e8ad1_card.sr