1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
|
##
## This file is part of the sigrok project.
##
## Copyright (C) 2011 Gareth McMullin <gareth@blacksphere.co.nz>
## Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
# SPI protocol decoder
import sigrokdecode as srd
# Key: (CPOL, CPHA). Value: SPI mode.
# Clock polarity (CPOL) = 0/1: Clock is low/high when inactive.
# Clock phase (CPHA) = 0/1: Data is valid on the leading/trailing clock edge.
spi_mode = {
(0, 0): 0, # Mode 0
(0, 1): 1, # Mode 1
(1, 0): 2, # Mode 2
(1, 1): 3, # Mode 3
}
# Annotation formats
ANN_HEX = 0
class Decoder(srd.Decoder):
api_version = 1
id = 'spi'
name = 'SPI'
longname = 'Serial Peripheral Interface'
desc = 'Full-duplex, synchronous, serial bus.'
license = 'gplv2+'
inputs = ['logic']
outputs = ['spi']
probes = [
{'id': 'miso', 'name': 'MISO',
'desc': 'SPI MISO line (Master in, slave out)'},
{'id': 'mosi', 'name': 'MOSI',
'desc': 'SPI MOSI line (Master out, slave in)'},
{'id': 'sck', 'name': 'CLK', 'desc': 'SPI clock line'},
{'id': 'cs', 'name': 'CS#', 'desc': 'SPI CS (chip select) line'},
]
optional_probes = [] # TODO
options = {
'cs_polarity': ['CS# polarity', 'active-low'],
'cpol': ['Clock polarity', 0],
'cpha': ['Clock phase', 0],
'bitorder': ['Bit order within the SPI data', 'msb-first'],
'wordsize': ['Word size of SPI data', 8], # 1-64?
}
annotations = [
['Hex', 'SPI data bytes in hex format'],
]
def __init__(self):
self.oldsck = 1
self.bitcount = 0
self.mosidata = 0
self.misodata = 0
self.bytesreceived = 0
self.samplenum = -1
self.cs_was_deasserted_during_data_word = 0
self.oldcs = -1
def start(self, metadata):
self.out_proto = self.add(srd.OUTPUT_PROTO, 'spi')
self.out_ann = self.add(srd.OUTPUT_ANN, 'spi')
def report(self):
return 'SPI: %d bytes received' % self.bytesreceived
def decode(self, ss, es, data):
# TODO: Either MISO or MOSI could be optional. CS# is optional.
for (self.samplenum, (miso, mosi, sck, cs)) in data:
if self.oldcs != cs:
# Send all CS# pin value changes.
self.put(self.samplenum, self.samplenum, self.out_proto,
['CS-CHANGE', self.oldcs, cs])
self.put(self.samplenum, self.samplenum, self.out_ann,
[0, ['CS-CHANGE: %d->%d' % (self.oldcs, cs)]])
self.oldcs = cs
# Ignore sample if the clock pin hasn't changed.
if sck == self.oldsck:
continue
self.oldsck = sck
# Sample data on rising/falling clock edge (depends on mode).
mode = spi_mode[self.options['cpol'], self.options['cpha']]
if mode == 0 and sck == 0: # Sample on rising clock edge
continue
elif mode == 1 and sck == 1: # Sample on falling clock edge
continue
elif mode == 2 and sck == 1: # Sample on falling clock edge
continue
elif mode == 3 and sck == 0: # Sample on rising clock edge
continue
# If this is the first bit, save its sample number.
if self.bitcount == 0:
self.start_sample = self.samplenum
active_low = (self.options['cs_polarity'] == 'active-low')
deasserted = cs if active_low else not cs
if deasserted:
self.cs_was_deasserted_during_data_word = 1
ws = self.options['wordsize']
# Receive MOSI bit into our shift register.
if self.options['bitorder'] == 'msb-first':
self.mosidata |= mosi << (ws - 1 - self.bitcount)
else:
self.mosidata |= mosi << self.bitcount
# Receive MISO bit into our shift register.
if self.options['bitorder'] == 'msb-first':
self.misodata |= miso << (ws - 1 - self.bitcount)
else:
self.misodata |= miso << self.bitcount
self.bitcount += 1
# Continue to receive if not enough bits were received, yet.
if self.bitcount != ws:
continue
self.put(self.start_sample, self.samplenum, self.out_proto,
['DATA', self.mosidata, self.misodata])
self.put(self.start_sample, self.samplenum, self.out_ann,
[ANN_HEX, ['MOSI: 0x%02x, MISO: 0x%02x' % (self.mosidata,
self.misodata)]])
if self.cs_was_deasserted_during_data_word:
self.put(self.start_sample, self.samplenum, self.out_ann,
[ANN_HEX, ['WARNING: CS# was deasserted during this '
'SPI data byte!']])
# Reset decoder state.
self.mosidata = 0
self.misodata = 0
self.bitcount = 0
# Keep stats for summary.
self.bytesreceived += 1
|
