path: root/decoders/i2c.py

##
## This file is part of the sigrok project.
##
## Copyright (C) 2010-2011 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

#
# I2C protocol decoder
#

#
# The Inter-Integrated Circuit (I2C) bus is a bidirectional, multi-master
# bus using two signals (SCL = serial clock line, SDA = serial data line).
#
# There can be many devices on the same bus. Each device can potentially be
# master or slave (and that can change during runtime). Both slave and master
# can potentially play the transmitter or receiver role (this can also
# change at runtime).
#
# Possible maximum data rates:
#  - Standard mode: 100 kbit/s
#  - Fast mode: 400 kbit/s
#  - Fast-mode Plus: 1 Mbit/s
#  - High-speed mode: 3.4 Mbit/s
#
# START condition (S): SDA = falling, SCL = high
# Repeated START condition (Sr): same as S
# Data bit sampling: SCL = rising
# STOP condition (P): SDA = rising, SCL = high
#
# All data bytes on SDA are exactly 8 bits long (transmitted MSB-first).
# Each byte has to be followed by a 9th ACK/NACK bit. If that bit is low,
# that indicates an ACK, if it's high that indicates a NACK.
#
# After the first START condition, a master sends the device address of the
# slave it wants to talk to. Slave addresses are 7 bits long (MSB-first).
# After those 7 bits, a data direction bit is sent. If the bit is low that
# indicates a WRITE operation, if it's high that indicates a READ operation.
#
# Later an optional 10bit slave addressing scheme was added.
#
# Documentation:
# http://www.nxp.com/acrobat/literature/9398/39340011.pdf (v2.1 spec)
# http://www.nxp.com/acrobat/usermanuals/UM10204_3.pdf (v3 spec)
# http://en.wikipedia.org/wiki/I2C
#

# TODO: Look into arbitration, collision detection, clock synchronisation, etc.
# TODO: Handle clock stretching.
# TODO: Handle combined messages / repeated START.
# TODO: Implement support for 7bit and 10bit slave addresses.
# TODO: Implement support for inverting SDA/SCL levels (0->1 and 1->0).
# TODO: Implement support for detecting various bus errors.

#
# I2C output format:
#
# The output consists of a (Python) list of I2C "packets", each of which
# has an (implicit) index number (its index in the list).
# Each packet consists of a Python dict with certain key/value pairs.
#
# TODO: Make this a list later instead of a dict?
#
# 'type': (string)
#   - 'S' (START condition)
#   - 'Sr' (Repeated START)
#   - 'AR' (Address, read)
#   - 'AW' (Address, write)
#   - 'DR' (Data, read)
#   - 'DW' (Data, write)
#   - 'P' (STOP condition)
# 'range': (tuple of 2 integers, the min/max samplenumber of this range)
#   - (min, max)
#   - min/max can also be identical.
# 'data': (actual data as integer ???) TODO: This can be very variable...
# 'ann': (string; additional annotations / comments)
#
# Example output:
# [{'type': 'S',  'range': (150, 160), 'data': None, 'ann': 'Foobar'},
#  {'type': 'AW', 'range': (200, 300), 'data': 0x50, 'ann': 'Slave 4'},
#  {'type': 'DW', 'range': (310, 370), 'data': 0x00, 'ann': 'Init cmd'},
#  {'type': 'AR', 'range': (500, 560), 'data': 0x50, 'ann': 'Get stat'},
#  {'type': 'DR', 'range': (580, 640), 'data': 0xfe, 'ann': 'OK'},
#  {'type': 'P',  'range': (650, 660), 'data': None, 'ann': None}]
#
# Possible other events:
#   - Error event in case protocol looks broken:
#     [{'type': 'ERROR', 'range': (min, max),
#      'data': TODO, 'ann': 'This is not a Microchip 24XX64 EEPROM'},
#     [{'type': 'ERROR', 'range': (min, max),
#      'data': TODO, 'ann': 'TODO'},
#   - TODO: Make list of possible errors accessible as metadata?
#
# TODO: I2C address of slaves.
# TODO: Handle multiple different I2C devices on same bus
#       -> we need to decode multiple protocols at the same time.
# TODO: range: Always contiguous? Splitted ranges? Multiple per event?
#

#
# I2C input format:
#
# signals:
# [[id, channel, description], ...] # TODO
#
# Example:
# {'id': 'SCL', 'ch': 5, 'desc': 'Serial clock line'}
# {'id': 'SDA', 'ch': 7, 'desc': 'Serial data line'}
# ...
#
# {'inbuf': [...],
#  'signals': [{'SCL': }]}
#

import sigrokdecode

# symbols for i2c decoders up the stack
START           = 1
START_REPEAT    = 2
STOP            = 3
ACK             = 4
NACK            = 5
ADDRESS_READ    = 6
ADDRESS_WRITE   = 7
DATA_READ       = 8
DATA_WRITE      = 9

# States
FIND_START = 0
FIND_ADDRESS = 1
FIND_DATA = 2


class Decoder(sigrokdecode.Decoder):
    id = 'i2c'
    name = 'I2C'
    longname = 'Inter-Integrated Circuit (I2C) bus'
    desc = 'I2C is a two-wire, multi-master, serial bus.'
    longdesc = '...'
    author = 'Uwe Hermann'
    email = 'uwe@hermann-uwe.de'
    license = 'gplv2+'
    inputs = ['logic']
    outputs = ['i2c']
    probes = [
        {'id': 'scl', 'name': 'SCL', 'desc': 'Serial clock line'},
        {'id': 'sda', 'name': 'SDA', 'desc': 'Serial data line'},
    ]
    options = {
        'address-space': ['Address space (in bits)', 7],
    }

    def __init__(self, **kwargs):
        self.output_protocol = None
        self.output_annotation = None
        self.samplecnt = 0
        self.bitcount = 0
        self.databyte = 0
        self.wr = -1
        self.startsample = -1
        self.is_repeat_start = 0
        self.state = FIND_START
        self.oldscl = None
        self.oldsda = None

    def start(self, metadata):
        self.output_protocol = self.output_new(2)
        self.output_annotation = self.output_new(1)

    def report(self):
        pass

    def is_start_condition(self, scl, sda):
        """START condition (S): SDA = falling, SCL = high"""
        if (self.oldsda == 1 and sda == 0) and scl == 1:
            return True
        return False

    def is_data_bit(self, scl, sda):
        """Data sampling of receiver: SCL = rising"""
        if self.oldscl == 0 and scl == 1:
            return True
        return False

    def is_stop_condition(self, scl, sda):
        """STOP condition (P): SDA = rising, SCL = high"""
        if (self.oldsda == 0 and sda == 1) and scl == 1:
            return True
        return False

    def found_start(self, scl, sda):
        if self.is_repeat_start == 1:
            out_proto = [ START_REPEAT ]
            out_ann = [ "START REPEAT" ]
        else:
            out_proto = [ START ]
            out_ann = [ "START" ]
        self.put(self.output_protocol, out_proto)
        self.put(self.output_annotation, out_ann)

        self.state = FIND_ADDRESS
        self.bitcount = self.databyte = 0
        self.is_repeat_start = 1
        self.wr = -1

    def found_address_or_data(self, scl, sda):
        """Gather 8 bits of data plus the ACK/NACK bit."""

        if self.startsample == -1:
            # TODO: should be samplenum, as received from the feed
            self.startsample = self.samplecnt
        self.bitcount += 1

        # Address and data are transmitted MSB-first.
        self.databyte <<= 1
        self.databyte |= sda

        # Return if we haven't collected all 8 + 1 bits, yet.
        if self.bitcount != 9:
            return []

        # We received 8 address/data bits and the ACK/NACK bit.
        self.databyte >>= 1 # Shift out unwanted ACK/NACK bit here.

        if self.state == FIND_ADDRESS:
            d = self.databyte & 0xfe
            # The READ/WRITE bit is only in address bytes, not data bytes.
            self.wr = 1 if (self.databyte & 1) else 0
        elif self.state == FIND_DATA:
            d = self.databyte
        else:
            # TODO: Error?
            pass

        out_proto = []
        out_ann = []
        # TODO: Simplify.
        if self.state == FIND_ADDRESS and self.wr == 1:
            cmd = ADDRESS_WRITE
            ann = 'ADDRESS WRITE'
        elif self.state == FIND_ADDRESS and self.wr == 0:
            cmd = ADDRESS_READ
            ann = 'ADDRESS READ'
        elif self.state == FIND_DATA and self.wr == 1:
            cmd = DATA_WRITE
            ann = 'DATA WRITE'
        elif self.state == FIND_DATA and self.wr == 0:
            cmd = DATA_READ
            ann = 'DATA READ'
        out_proto.append( [cmd, d] )
        out_ann.append( ["%s" % ann, "0x%02x" % d] )

        if sda == 1:
            out_proto.append( [NACK] )
            out_ann.append( ["NACK"] )
        else:
            out_proto.append( [ACK] )
            out_ann.append( ["ACK"] )

        self.put(self.output_protocol, out_proto)
        self.put(self.output_annotation, out_ann)

        self.bitcount = self.databyte = 0
        self.startsample = -1

        if self.state == FIND_ADDRESS:
            self.state = FIND_DATA
        elif self.state == FIND_DATA:
            # There could be multiple data bytes in a row.
            # So, either find a STOP condition or another data byte next.
            pass

    def found_stop(self, scl, sda):
        self.put(self.output_protocol, [ STOP ])
        self.put(self.output_annotation, [ "STOP" ])

        self.state = FIND_START
        self.is_repeat_start = 0
        self.wr = -1

    def put(self, output_id, data):
        # inject sample range into the call up to sigrok
        super(Decoder, self).put(0, 0, output_id, data)

    def decode(self, timeoffset, duration, data):
        for samplenum, (scl, sda) in data:
            self.samplecnt += 1

            # First sample: Save SCL/SDA value.
            if self.oldscl == None:
                self.oldscl = scl
                self.oldsda = sda
                continue

            # TODO: Wait until the bus is idle (SDA = SCL = 1) first?

            # State machine.
            if self.state == FIND_START:
                if self.is_start_condition(scl, sda):
                    self.found_start(scl, sda)
            elif self.state == FIND_ADDRESS:
                if self.is_data_bit(scl, sda):
                    self.found_address_or_data(scl, sda)
            elif self.state == FIND_DATA:
                if self.is_data_bit(scl, sda):
                    self.found_address_or_data(scl, sda)
                elif self.is_start_condition(scl, sda):
                    self.found_start(scl, sda)
                elif self.is_stop_condition(scl, sda):
                    self.found_stop(scl, sda)
            else:
                # TODO: Error?
                pass

            # Save current SDA/SCL values for the next round.
            self.oldscl = scl
            self.oldsda = sda