| Age | Commit message (Collapse) | Author |
|---|
|
Rephrase how the 'WAIT IDLE' stage skips over all-low input signals.
Have the next high level on either line detected in common code.
|
|
Do reference the period's start and end sample numbers when the
duty cycle is written to the binary output stream. The previous
implementation inappropriately used the period counter instead.
|
|
Move more items from the Python object's members to local variables of the
decode() method, as they are used there exclusively.
Mark a spot where the binary output references suspicious "sample numbers".
|
|
With the simplicity of PWM waveforms and the convenience of the v3 API,
there is no need to maintain internal state. After the start of the
first period was determined based on the input signal's polarity, any
period is defined by just the next two edges, and the next period is
immediately to follow.
|
|
This is not really relevant for stacked PDs currently (they can be used
unmodified with either PDv2 or PDv3 low-level decoders), but it'll allow
us to drop PDv2 support completely.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Check for the availability of a samplerate specification, but don't
abort in its absence. Lack of the samplerate only prevents the emission
of throughput annotations, but still allows decoding the clocked signal.
|
|
Eliminate more instances where Python code tracked signal changes instead
of having common library code do the work. Reduce the number of boundary
crossings between library and decoder code (Python vs C), by inspecting
fewer input edges. Yet cope with the CS signal's being optional. Emit
identical annotations to the previous implementation for CS changes,
including the initial change "from None to 0/1". Sort the checks for
optional input signals at the top of decode() into a more natural order.
Improve and update comments.
This commit results in a more appropriate use of the PD v3 API in the
SPI protocol decoder.
|
|
Have edges detected in common library code. Cope with optional initial
low level (without an edge) at the start of sample data. Handle the
optionally enforced processing at a specified sample number.
|
|
Have edges detected in common library code.
|
|
Have edges detected in common library code. Move the test for presence
of optional channels out of the decode loop. Do inspect the very first
sample for pixel compatibility with the previous implementation.
|
|
Not all EEPROMs of this series have (just) a 'c' in the name.
|
|
|
|
|
|
This allows frontends to set the assumed initial pins (i.e., the assumed
state of the pins before the first sample of a capture) to user-specified
values.
The assumed initial pins can be either low, or high, or "use same value
as the first sample of the capture".
The special self.initial_pins decoder attribute is now removed.
|
|
None of the other PDs have a vendorname in the PD name.
|
|
Bit stuffing does not apply to the last fields of a frame, specifically
the CRC delimiter, the ACK, and the end-of-frame fields. Adjust the
respective bit handling logic.
This fixes bug #656.
|
|
Don't inspect each individual sample in the Python based PD. Instead use
the backend's query API to detect the start of a frame and to advance to
the sample point position.
|
|
|
|
Replace the hardcoded value with the last cmd used. I'd think the whole
ACMD handling could be simplified if we make further use of this new
variable. But for now, let's keep it simple and make it work.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Probably a typo, currently 'cmd0' gets pushed out.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
|
|
Use the same scale.
Signed-off-by: Karl Palsson <karlp@etactica.com>
|
|
Instead of only measuring the timing from any edge to any edge, provide
a mode to measure the times from falling->falling and rising->rising
edges. This works better to monitor timing of an IRQ pin for instance,
that drives one direction under hardware, and is only cleared by
software reading a value.
Include time delta measurements as an optional annotation to help track
jitter in measurements.
Signed-off-by: Karl Palsson <karlp@etactica.com>
|
|
The extra row of the average isn't always useful. Allow it to be
disabled by setting the average window to zero.
Signed-off-by: Karl Palsson <karlp@etactica.com>
|
|
There are multiple devices in the ADE77xx series that are similar enough
to be supportable via this decoder in the future.
|
|
|
|
No value decoding, that can be fairly complicated.
Signed-off-by: Karl Palsson <karlp@etactica.com>
|
|
putr2 is unused, so let it go.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
|
|
(for consistency with all other decoders)
|
|
|
|
|
|
This fixes parts of bug #931.
|
|
|
|
This has two advantages:
- The Python output is always deterministic, which was not the case for
the dict-based version since dict items have no guaranteed order in
Python. This caused issues with the sigrok-test use-case.
- The code is slightly more readable.
|
