summaryrefslogtreecommitdiff
path: root/decoders
AgeCommit message (Collapse)Author
2012-05-18srd: MX25Lxx05D: Fix SE command.Uwe Hermann
2012-05-18srd: MX25Lxx05D: Implement READ command.Uwe Hermann
2012-05-17srd: MX25Lxx05D: Implement RDSR and PP commands.Uwe Hermann
Also, some small fixes and additional debug code/output.
2012-05-17srd: spi: Document output protocol, send CS# changes.Uwe Hermann
As per guidelines in HACKING, the protocol "commands"/items should be ALLCAPS, thus change 'data' to 'DATA'. Also, fix MX25Lxx05D protocol decoder accordingly, currently the only one we have which stacks on top of SPI. Add a new 'CS-CHANGE' output protocol item, which is sent upon every change of the CS# pin value (either 0->1, or vice versa). This is needed by various higher-level PDs.
2012-05-10srd: JTAG: Enavble and get/use optional probes.Uwe Hermann
2012-05-09srd: Add usable one-liner descriptions for all PDs.Uwe Hermann
2012-05-08srd: Remove TODOs from annotation format names.Uwe Hermann
Also, fix minor consistency issues, cosmetics, typos.
2012-05-05srd: JTAG/SMT32: Some more improvements.Uwe Hermann
Add APB-AP register offsets/names, refactor and fix some code, handle in/out APACC/DPACC better.
2012-05-03srd: JTAG/STM32: Factor out dpacc_data_in/out.Uwe Hermann
Also, add a few code comments.
2012-05-03srd: JTAG/STM32: Decode IDCODE[31:0] parts.Uwe Hermann
2012-05-03srd: JTAG: Also show the bitstrings in hex (for now).Uwe Hermann
2012-05-03srd: JTAG/STM32: Various improvements, fixes.Uwe Hermann
Add APACC register handling, fix DPACC handling (esp. 'A' register size), ouput a warning upon reserved DAPABORT bits being non-zero, implement preliminary state machine, add various TODOs. This is still work in progress, not yet finished or working properly.
2012-04-29srd: Add initial JTAG/STM32 protocol decoder.Uwe Hermann
(not yet finished) This protocol decoder can decode ST STM32 specific JTAG accesses, knows about the STM32-specific registers and bits.
2012-04-29srd: JTAG: Add some more docs.Uwe Hermann
2012-04-29srd: JTAG: The TRST# (and SRST#) signals are optional.Uwe Hermann
Don't handle them for now, will do this later.
2012-04-29srd: jtag: Various bugfixes.Uwe Hermann
Most importantly, both TDI and TDO are sampled at the rising TCK edge, and only upon transitions from SHIFT-DR to SHIFT-DR and SHIFT-IR to SHIFT-IR are we to save the TDI/TDO values (if I understood this correcly). Also, start out in RUN-TEST/IDLE state for now. This is useful if you have JTAG dumps which start "in the middle" somewhere, not in the TEST-LOGIC-RESET state. For full dumps, the JTAG software usually issues five TMS=1 cycles to force the JTAG state machine into TEST-LOGIC-RESET anyway, so this works fine too.
2012-04-26srd: Add initial JTAG protocol decoder.Uwe Hermann
This is unfinished, needs some more work.
2012-04-26srd: lpc: Minor additions/fixes.Uwe Hermann
2012-04-21srd: MXC6225XU: Bugfixes, add missing bits/registers.Uwe Hermann
2012-04-19srd: Initial MEMSIC MXC6225XU protocol decoder.Uwe Hermann
Not quite finished yet, but relatively close.
2012-04-18Initial LPC protocol decoder implementation.Uwe Hermann
This is unfinished and not tested, and probably not really working, yet.
2012-04-06srd/i2s: Added links to documentationJoel Holdsworth
2012-04-06srd/i2s: Added sample-rate and bit-depth to reportJoel Holdsworth
2012-04-06srd/i2s: Print a warning on receiving a malformed wordJoel Holdsworth
2012-04-06srd/i2s: Initial implementationJoel Holdsworth
2012-03-31srd: Disable 'nunchuk' PD for now, it's unfinished.Uwe Hermann
2012-03-31srd: Decoders: Fix/simplify samplenum usage.Uwe Hermann
2012-03-28srd: PDs: Kill obsolete 'longdesc' entries.Uwe Hermann
2012-03-24srd: List 'report()' in all PDs for consistency.Uwe Hermann
2012-03-21srd: Drop ebr30a_i2c_demux in favor of i2cdemux.Uwe Hermann
The i2cdemux protocol decoder is the more generic version of the obsolete ebr30a_i2c_demux decoder, and should be able (now or later) to do everything that ebr30a_i2c_demux can do.
2012-03-21sr/srd: Small fixes, constifications, doc updates.Uwe Hermann
2012-03-04srd: I2C: Update PD protocol docs.Uwe Hermann
2012-03-04srd: PDs: More cosmetics.Uwe Hermann
2012-03-04srd: PDs: Use strings for states, too.Uwe Hermann
2012-03-04srd: PDs: Consistency/cosmetic fixes.Uwe Hermann
2012-02-28srd: I2C: change format to have ACK/NACK bits as separate eventsBert Vermeulen
2012-02-28srd: PDs: Whitespace and cosmetics.Uwe Hermann
2012-02-01srd: Properly use append() for appending to lists.Uwe Hermann
This is not only the canonical way to do it, it's also quite a bit faster and less memory-intensive than using '+='.
2012-02-01srd: Move all protocol docs to __init__.py files.Uwe Hermann
2012-02-01srd: spi: Use strings for most options.Uwe Hermann
2012-02-01srd: uart: Use strings for most PD options.Uwe Hermann
2012-02-01srd: uart: Move protocol docs to __init__.py.Uwe Hermann
2012-02-01srd: uart: Add missing initialization.Uwe Hermann
2012-02-01srd: uart: Use strings for packet types.Uwe Hermann
While this has a (small) performance penalty compared to using integers, it has the advantage of not requiring the use of magic numbers which need to be declared in both the UART decoder and all decoders which stack on top of UART.
2012-02-01srd: rename extra_probes to optional_probes in all PDsBert Vermeulen
2012-01-31srd: remove obsolete DDC-only I2C filterBert Vermeulen
2012-01-31srd: add generic I2C filter PDBert Vermeulen
2012-01-31edid: properly deal with leading I2C crud + small fixesBert Vermeulen
2012-01-29edid: move PD docstring to __init__.pyBert Vermeulen
also minor code cleanups
2012-01-29srd: add EDID 1.3 decoderBert Vermeulen
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-16 04:49:57 +0000