| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2014-02-19 | spi: Fix a bug when only supplying MOSI (but not MISO). | Uwe Hermann | |
| 2014-02-09 | spi: Use/store bits in MSB-first order. | Uwe Hermann | |
| This makes things a bit easier/clearer for most stacked PDs. | |||
| 2014-02-09 | spi: Fix warnings about CS# being de-asserted. | Uwe Hermann | |
| 2014-02-09 | spi: Throw an error if neither MISO nor MOSI was supplied. | Uwe Hermann | |
| 2014-02-09 | spi: Fix incorrect dataword endsample numbers. | Uwe Hermann | |
| 2014-02-09 | spi: Refactoring and cleanups. | Uwe Hermann | |
| 2014-02-09 | spi: Factor out reset_decoder_state(). | Uwe Hermann | |
| 2014-02-09 | spi: Output per-bit annotations and OUTPUT_PYTHON data. | Uwe Hermann | |
| This can be used by higher-level PDs to decode per-bit items (not just based on whole datawords). | |||
| 2014-02-01 | spi: Improve probe names/descriptions a bit. | Uwe Hermann | |
| 2014-01-31 | spi: Define annotation rows. | Uwe Hermann | |
| 2014-01-30 | s/out_proto/out_python/. | Uwe Hermann | |
| The output type is now called OUTPUT_PYTHON, adapt all PDs to that. | |||
| 2014-01-30 | spi: Add mx25l1605d_probe test case. | Uwe Hermann | |
| 2014-01-29 | spi: Add atmega32_00 test case. | Uwe Hermann | |
| 2014-01-29 | spi: Rename 'sck' to the more common 'clk'. | Uwe Hermann | |
| 2014-01-29 | spi: Allow MISO or MOSI to be optional. | Uwe Hermann | |
| This fixes bug #175. | |||
| 2014-01-28 | spi: Drop temporary hack for combined MISO/MOSI out. | Uwe Hermann | |
| 2014-01-28 | All PDs: Consistent naming/case for annotation shortnames/IDs. | Uwe Hermann | |
| 2014-01-28 | All PDs: Drop unneeded comments. | Uwe Hermann | |
| The single comment re-stating the PD's name / description / purpose in each pd.py file is not really needed, that info is available in the Decoder class' attributes already. | |||
| 2014-01-28 | All PDs: Improve/fix descriptions. | Uwe Hermann | |
| 2013-11-27 | Automate protocol decoder installation. | Bert Vermeulen | |
| This automatically figures out the files to install for each protocol decoder, without involving autotools. All python files (filenames ending in .py) are always installed. If a protocol decoder requires installation of a non-python file, a small file called 'config' can be created in that protocol decoder's directory, with the following content: # comments are ok extra-install vendorlist.txt commands.txt | |||
| 2013-11-15 | Drop outdated report: this should be handled by a frontend. | Bert Vermeulen | |
| 2013-11-15 | Use the new Decoder.register() API | Bert Vermeulen | |
| 2013-11-15 | Emit meta bitrate | Bert Vermeulen | |
| 2013-11-07 | Rename inter-PD output type to SRD_OUTPUT_PYTHON | Bert Vermeulen | |
| This better reflects what it is: a python object generated and processed by python code. | |||
| 2013-10-30 | The start() method no longer takes a metadata parameter | Bert Vermeulen | |
| 2013-09-12 | spi: Add some documentation, move OUTPUT_PROTO docs. | Uwe Hermann | |
| Add a short help text for the PD and move the OUTPUT_PROTO docs to pd.py since they're not meant for the user too see. | |||
| 2013-09-12 | spi: Make CS# optional and use it if supplied. | Uwe Hermann | |
| The CS# pin is now optional, it can either be supplied to the PD or not. If it _is_ supplied, reset the PD state every time it changes. This has the effect that "incomplete" SPI frames and those where CS# is not asserted are ignored and not decoded. This fixes bug #152. | |||
| 2013-09-12 | spi: Refactor code, use a state machine. | Uwe Hermann | |
| 2013-09-12 | spi: Provide multiple annotation types. | Uwe Hermann | |
| For now SPI gets the following annotation types: - MISO/MOSI SPI data - MISO SPI data - MOSI SPI data (i.e. you can see either MISO, or MOSI, or both; the latter is most useful for CLI usage) Also, show the hex values as e.g. F5 (upper-case letters, no "0x" prefix). | |||
| 2013-09-12 | spi: Fix start-/end-sample numbers. | Uwe Hermann | |
| This now makes the SPI decoder suitable for use in GUIs. This fixes bug #150. | |||
| 2013-09-12 | spi: Make data format a PD option, add annotation types. | Uwe Hermann | |
| The data format can be specified via the PD's "format" option now, it is no longer an annotation type. Also, add and use two annotation types: "Data" and "Warnings". | |||
| 2013-04-23 | GPL headers: Use correct project name. | Uwe Hermann | |
| 2012-11-24 | All PDs: Name the files pd.py consistently. | Uwe Hermann | |
| The Python module name is determined by the directory name (e.g. dcf77), the *.py file names in that directory don't matter and can be kept consistent. | |||
| 2012-07-11 | srd: Performance improvements for various PDs. | Uwe Hermann | |
| Ignore/skip identical samples in most (low-level) PDs, as we're usually (but not necessarily always) only interested in pin changes. This yields a significant performance improvement for the PDs. The mechanism was already used in the 'i2s', 'jtag', and 'lpc' PDs, but not yet in all supported low-level decoders. The following PDs now also use this mechanism: 'dcf77', 'i2c', 'spi', 'uart', and 'usb_signalling'. Thanks Lars-Peter Clausen <lars@metafoo.de> for bringing this to our attention. | |||
| 2012-06-12 | srd: Cosmetics. | Uwe Hermann | |
| 2012-05-17 | srd: spi: Document output protocol, send CS# changes. | Uwe Hermann | |
| As per guidelines in HACKING, the protocol "commands"/items should be ALLCAPS, thus change 'data' to 'DATA'. Also, fix MX25Lxx05D protocol decoder accordingly, currently the only one we have which stacks on top of SPI. Add a new 'CS-CHANGE' output protocol item, which is sent upon every change of the CS# pin value (either 0->1, or vice versa). This is needed by various higher-level PDs. | |||
| 2012-05-09 | srd: Add usable one-liner descriptions for all PDs. | Uwe Hermann | |
| 2012-03-31 | srd: Decoders: Fix/simplify samplenum usage. | Uwe Hermann | |
| 2012-03-28 | srd: PDs: Kill obsolete 'longdesc' entries. | Uwe Hermann | |
| 2012-03-04 | srd: PDs: More cosmetics. | Uwe Hermann | |
| 2012-02-01 | srd: Move all protocol docs to __init__.py files. | Uwe Hermann | |
| 2012-02-01 | srd: spi: Use strings for most options. | Uwe Hermann | |
| 2012-02-01 | srd: rename extra_probes to optional_probes in all PDs | Bert Vermeulen | |
| 2012-01-28 | srd: PDs: Cleanups, simplifications, small fixes. | Uwe Hermann | |
| 2012-01-25 | srd: All PDs: Various fixes, cosmetics. | Uwe Hermann | |
| - List all API methods and metadata variables in all PDs to make things easier and more consistent for new PD writers. - Fix probe assignment in a few PDs. - Raise exceptions upon invalid states of the PD state machines (bug). | |||
| 2012-01-20 | srd: SPI: Convert to new options API. | Uwe Hermann | |
| 2012-01-15 | srd: Add 'api_version = 1' to all PDs. | Uwe Hermann | |
| 2012-01-15 | srd: Each PD now has its own subdirectory. | Uwe Hermann | |
 |
index : libsigrokdecode.git | |
| libsigrokdecode | ejona86@gmail.com |
| summaryrefslogtreecommitdiff |