| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
|
|
Don't override/overwrite CFLAGS in configure.ac, but rather amend it
with (currently) "-Wall -Wextra".
This properly allows users/packagers to do things like:
./configure (this will default to using "-g -O2" additionally)
CFLAGS="-g -O2" ./configure (same as above)
CFLAGS="" ./configure (no additional flags)
CFLAGS="-g -O0" ./configure (disable optimization, e.g. for valgrind use)
etc. etc.
|
|
|
|
|
|
|
|
|
|
The Python module name is determined by the directory name (e.g. dcf77),
the *.py file names in that directory don't matter and can be kept
consistent.
|
|
|
|
|
|
|
|
|
|
On Windows, cmake-using projects seem to have problems with the
"-I/c/Python32/include" syntax we have in the libsigrokdecode .pc file.
However, "-Ic:/Python32/include" works fine. So we just add both to
support everything.
|
|
|
|
|
|
|
|
Thanks Iztok Jeras <iztok.jeras@gmail.com> for the report.
|
|
This is work in progress, but it already works partially, and can be used
for actual decodes of some commands.
This PD stacks on top of the SPI protocol decoder.
|
|
The temperature unit is nowadays called just "Kelvin", not
"degrees Kelvin" (even though this was not always the case).
|
|
|
|
|
|
|
|
While states in the PD should be ALLCAPS per guidelines (for
consistency), the annotations that a PD outputs (and are shown in a
console via sigrok-cli or in a GUI) should be "normal" human-readable
text/formatting usually, i.e. not ALLCAPS.
|
|
|
|
|
|
|
|
It doesn't make sense to have one "generic" onewire_transport PD, as
this layer is very much device-specific and such a generic PD would
have to contain an accumulation of all possible features and commands
and handling code of all existing (now and in the future) 1-Wire
devices, which is neither possible nor useful nor elegant.
There are (for example) 1-Wire thermometers, RTCs, EEPROMs,
special-purpose security chips with passwords/keys, battery monitoring
chips, and many many others. They all have a different set of features,
commands and command codes, RAM areas/sizes/partitioning/contents,
protocols, and so on.
Thus, the layering for 1-Wire PD stacks should look like this:
onewire_link -> onewire_network -> <specificdevice>
Examples:
onewire_link -> onewire_network -> maxim_ds28ea00 (special thermometer)
onewire_link -> onewire_network -> maxim_ds2431 (1kbit EEPROM)
onewire_link -> onewire_network -> maxim_ds2417 (RTC)
onewire_link -> onewire_network -> maxim_ds2762 (battery monitor)
onewire_link -> onewire_network -> maxim_ds1961s (SHA-1 eCash iButton)
and so on...
So, renaming onewire_transport to maxim_ds28ea00. The non-DS28EA00
specific code will be dropped and/or moved to other PDs on top of
onewire_network later.
|
|
The 'Overdrive match ROM' command is 0x69, not 0x6d. Verified in various
datasheets and the original 1-Wire/iButton spec.
|
|
The annotation types are 'Text' and 'Warnings', not 'Link' etc. as the
annotations of the onewire_link PD (for example) are already clearly
from the link layer. The annotation types should be different things/formats
of a specific PD's annotation output instead (like "Celsius" / "Kelvin"
for some temperature sensor, for example).
|
|
Also, some additional cleanups.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
exit message
|
|
|
|
|
|
|
|
The new 'usb_signalling' and the 'usb_protocol' PD which stacks on top
of it, replace the old 'usb' decoder.
|
|
Ignore/skip identical samples in most (low-level) PDs, as we're usually
(but not necessarily always) only interested in pin changes.
This yields a significant performance improvement for the PDs.
The mechanism was already used in the 'i2s', 'jtag', and 'lpc' PDs, but not
yet in all supported low-level decoders. The following PDs now also use
this mechanism: 'dcf77', 'i2c', 'spi', 'uart', and 'usb_signalling'.
Thanks Lars-Peter Clausen <lars@metafoo.de> for bringing this to our
attention.
|
|
This is just a preparation for later, the report() is not hooked up
anywhere, yet.
|
|
|
|
|
|
|
|
annotations now show duration
|
