diff options
Diffstat (limited to 'irmp/irmpconfig.h')
| -rw-r--r-- | irmp/irmpconfig.h | 287 |
1 files changed, 287 insertions, 0 deletions
diff --git a/irmp/irmpconfig.h b/irmp/irmpconfig.h new file mode 100644 index 0000000..a2a7650 --- /dev/null +++ b/irmp/irmpconfig.h @@ -0,0 +1,287 @@ +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * irmpconfig.h + * + * DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H! + * + * Copyright (c) 2009-2019 Frank Meyer - frank(at)fli4l.de + * Extensions for PIC 12F1820 W.Strobl 2014-07-20 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ + +#ifndef _IRMP_H_ +# error please include only irmp.h, not irmpconfig.h +#endif + +#ifdef IRMPCONFIG_STAGE1_H + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change IRMP_32_BIT here + * + * Normally, IRMP_32_BIT ist 0. Then we use irmp.command as a 16 bit value. + * If you set IRMP_32_BIT to 1, we will use irmp.command as a 32 bit value. + * A 32 bit command costs more CPU resources on 8 bit processors (e.g. AVR), + * but there are IR protocols which need more than 16 bits for a reasonable + * command value. + * + * If you want to use one of the following protocols, set IRMP_32_BIT to 1, + * otherwise set it to 0: + * - MERLIN + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ + +#define IRMP_32_BIT 0 // use 32 bit command value, 0 or 1 + +#endif // IRMPCONFIG_STAGE1_H +#ifdef IRMPCONFIG_STAGE2_H + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change F_INTERRUPTS if you change the number of interrupts per second, + * Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000 + * A value above 15000 costs additional program space, absolute maximum value is 20000. + * On PIC with XC8/C18 Compiler, use 15151 as the correct value. + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#ifndef F_INTERRUPTS +# define F_INTERRUPTS 15000 // interrupts per second, min: 10000, max: 20000, typ: 15000 +#endif + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change settings from 1 to 0 if you want to disable one or more decoders. + * This saves program space. + * + * 1 enable decoder + * 0 disable decoder + * + * The standard decoders are enabled per default. + * Less common protocols are disabled here, you need to enable them manually. + * + * If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required. + * If you don't need RC5 when using FDC/RCCAR, you should disable RC5. + * You cannot enable both DENON and RUWIDO, only enable one of them. + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ + +// typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space +#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes +#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE + ONKYO >= 10000 ~300 bytes +#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsg32 >= 10000 ~300 bytes +#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes + +// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space +#define IRMP_SUPPORT_JVC_PROTOCOL 0 // JVC >= 10000 ~150 bytes +#define IRMP_SUPPORT_NEC16_PROTOCOL 0 // NEC16 >= 10000 ~100 bytes +#define IRMP_SUPPORT_NEC42_PROTOCOL 0 // NEC42 >= 10000 ~300 bytes +#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 0 // Matsushita >= 10000 ~50 bytes +#define IRMP_SUPPORT_DENON_PROTOCOL 0 // DENON, Sharp >= 10000 ~250 bytes +#define IRMP_SUPPORT_RC5_PROTOCOL 0 // RC5 >= 10000 ~250 bytes +#define IRMP_SUPPORT_RC6_PROTOCOL 0 // RC6 & RC6A >= 10000 ~250 bytes +#define IRMP_SUPPORT_IR60_PROTOCOL 0 // IR60 (SDA2008) >= 10000 ~300 bytes +#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 0 // Grundig >= 10000 ~300 bytes +#define IRMP_SUPPORT_SIEMENS_PROTOCOL 0 // Siemens Gigaset >= 15000 ~550 bytes +#define IRMP_SUPPORT_NOKIA_PROTOCOL 0 // Nokia >= 10000 ~300 bytes + +// exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space +#define IRMP_SUPPORT_BOSE_PROTOCOL 0 // BOSE >= 10000 ~150 bytes +#define IRMP_SUPPORT_KATHREIN_PROTOCOL 0 // Kathrein >= 10000 ~200 bytes +#define IRMP_SUPPORT_NUBERT_PROTOCOL 0 // NUBERT >= 10000 ~50 bytes +#define IRMP_SUPPORT_FAN_PROTOCOL 0 // FAN (ventilator) >= 10000 ~50 bytes +#define IRMP_SUPPORT_SPEAKER_PROTOCOL 0 // SPEAKER (~NUBERT) >= 10000 ~50 bytes +#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 0 // Bang & Olufsen >= 10000 ~200 bytes +#define IRMP_SUPPORT_RECS80_PROTOCOL 0 // RECS80 (SAA3004) >= 15000 ~50 bytes +#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 0 // RECS80EXT (SAA3008) >= 15000 ~50 bytes +#define IRMP_SUPPORT_THOMSON_PROTOCOL 0 // Thomson >= 10000 ~250 bytes +#define IRMP_SUPPORT_NIKON_PROTOCOL 0 // NIKON camera >= 10000 ~250 bytes +#define IRMP_SUPPORT_NETBOX_PROTOCOL 0 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!) +#define IRMP_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 ~150 bytes +#define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL 0 // Telefunken 1560 >= 10000 ~150 bytes +#define IRMP_SUPPORT_FDC_PROTOCOL 0 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5) +#define IRMP_SUPPORT_RCCAR_PROTOCOL 0 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5) +#define IRMP_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes +#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes +#define IRMP_SUPPORT_A1TVBOX_PROTOCOL 0 // A1 TV BOX >= 15000 (better 20000) ~300 bytes +#define IRMP_SUPPORT_LEGO_PROTOCOL 0 // LEGO Power RC >= 20000 ~150 bytes +#define IRMP_SUPPORT_RCMM_PROTOCOL 0 // RCMM 12,24, or 32 >= 20000 ~150 bytes +#define IRMP_SUPPORT_LGAIR_PROTOCOL 0 // LG Air Condition >= 10000 ~300 bytes +#define IRMP_SUPPORT_SAMSUNG48_PROTOCOL 0 // Samsung48 >= 10000 ~100 bytes (SAMSUNG must be enabled!) +#define IRMP_SUPPORT_MERLIN_PROTOCOL 0 // Merlin >= 15000 (better 20000) ~300 bytes +#define IRMP_SUPPORT_PENTAX_PROTOCOL 0 // Pentax >= 10000 ~150 bytes +#define IRMP_SUPPORT_S100_PROTOCOL 0 // S100 >= 10000 ~250 bytes +#define IRMP_SUPPORT_ACP24_PROTOCOL 0 // ACP24 >= 10000 ~250 bytes +#define IRMP_SUPPORT_TECHNICS_PROTOCOL 0 // TECHNICS >= 10000 ~250 bytes +#define IRMP_SUPPORT_PANASONIC_PROTOCOL 0 // PANASONIC Beamer >= 10000 ~250 bytes +#define IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL 0 // Mitsubishi Aircond >= 10000 ~250 bytes +#define IRMP_SUPPORT_VINCENT_PROTOCOL 0 // VINCENT >= 10000 ~250 bytes +#define IRMP_SUPPORT_SAMSUNGAH_PROTOCOL 0 // SAMSUNG AH >= 10000 ~250 bytes +#define IRMP_SUPPORT_IRMP16_PROTOCOL 0 // IRMP specific >= 15000 ~250 bytes +#define IRMP_SUPPORT_GREE_PROTOCOL 0 // GREE CLIMATE >= 10000 ~250 bytes +#define IRMP_SUPPORT_RCII_PROTOCOL 0 // RCII T+A >= 15000 ~250 bytes +#define IRMP_SUPPORT_METZ_PROTOCOL 0 // METZ >= 15000 ~250 bytes + +#define IRMP_SUPPORT_RADIO1_PROTOCOL 0 // RADIO, e.g. TEVION >= 10000 ~250 bytes (experimental) + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for ATMEL ATMega/ATTiny/XMega + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#if defined (ATMEL_AVR) || defined (__AVR_XMEGA__) // use PB6 as IR input on AVR +# define IRMP_PORT_LETTER B +# define IRMP_BIT_NUMBER 6 + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for PIC C18 or XC8 compiler + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined (PIC_C18) // use RB4 as IR input on PIC (C18 or XC8 compiler) +# if defined(__12F1840) +# define IRMP_PIN RA5 // on 12F1840 with XC8 compiler +# else +# define IRMP_PIN PORTBbits.RB4 // PIC C18 +# endif + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for PIC CCS compiler + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined (PIC_CCS) +# define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC (CCS compiler) + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for ARM STM32 + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined (ARM_STM32) // use C13 as IR input on STM32 +# define IRMP_PORT_LETTER C +# define IRMP_BIT_NUMBER 13 + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Hardware pin for ARM STM32 (HAL) - don't change here, define IRMP_RECEIVE_GPIO_Port & IRMP_RECEIVE_PIN in STM32Cube (Main.h) + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined (ARM_STM32_HAL) // STM32: IRMP_RECEIVE_GPIO_Port & IRMP_RECEIVE_PIN must be defined in STM32Cube +# define IRMP_PORT_LETTER IRMP_Receive_GPIO_Port +# define IRMP_BIT_NUMBER IRMP_Receive_Pin + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for Stellaris ARM Cortex M4 + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined (STELLARIS_ARM_CORTEX_M4) // use B4 as IR input on Stellaris LM4F +# define IRMP_PORT_LETTER B +# define IRMP_BIT_NUMBER 4 + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for STM8 + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined (SDCC_STM8) // use PA1 as IR input on STM8 +# define IRMP_PORT_LETTER A +# define IRMP_BIT_NUMBER 1 + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for ESP8266 + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined (__xtensa__) +# define IRMP_BIT_NUMBER 12 // use GPIO12 (Pin 7 UEXT) on ESP8266-EVB evaluation board + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for Teensy 3.x with teensyduino gcc compiler + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined (TEENSY_ARM_CORTEX_M4) +# define IRMP_PIN 1 // use Digital pin 1 as IR input on Teensy + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for MBED + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined(__MBED__) +# define IRMP_PIN P0_22 // use P1_27 on LPC1347 +# define IRMP_PINMODE PullUp // hardware dependent + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Change hardware pin here for ChibiOS HAL + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif defined(_CHIBIOS_HAL_) +# define IRMP_PIN LINE_IR_IN // use pin names as defined in the board config file, prefixed with "LINE_" +# define IRMP_LOGGING_SD SD1 // the ChibiOS HAL Serial Driver instance to log to + // (when IRMP_LOGGING is enabled below). + // Make sure SERIAL_BUFFERS_SIZE is large enough when enabling logging + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Handling of unknown target system: DON'T CHANGE + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#elif !defined (UNIX_OR_WINDOWS) +# error target system not defined. +#endif + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#ifndef IRMP_LOGGING +# define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not. default is 0 +#endif + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Use external logging routines + * If you enable external logging, you have also to enable IRMP_LOGGING above + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#ifndef IRMP_EXT_LOGGING +# define IRMP_EXT_LOGGING 0 // 1: use external logging, 0: do not. default is 0 +#endif + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM! + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#ifndef IRMP_PROTOCOL_NAMES +# define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not. default is 0 +#endif + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Use Callbacks to indicate input signal + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#ifndef IRMP_USE_CALLBACK +# define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0 +#endif + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Call the user-provided irmp_idle() function when IRMP is idle. + * Can be used to disable the timer irq and enter a sleep mode to save power + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#ifndef IRMP_USE_IDLE_CALL +# define IRMP_USE_IDLE_CALL 0 // 1: use idle calls. 0: do not. default is 0 +#endif + +/*--------------------------------------------------------------------------------------------------------------------------------------------------- + * Use ChibiOS Events to signal that valid IR data was received + *--------------------------------------------------------------------------------------------------------------------------------------------------- + */ +#if defined(_CHIBIOS_RT_) || defined(_CHIBIOS_NIL_) + +# ifndef IRMP_USE_EVENT +# define IRMP_USE_EVENT 0 // 1: use event. 0: do not. default is 0 +# endif + +# if IRMP_USE_EVENT == 1 && !defined(IRMP_EVENT_BIT) +# define IRMP_EVENT_BIT 1 // event flag or bit to send +# endif +# if IRMP_USE_EVENT == 1 && !defined(IRMP_EVENT_THREAD_PTR) +# define IRMP_EVENT_THREAD_PTR ir_receive_thread_p // pointer to the thread to send the event to +extern thread_t *IRMP_EVENT_THREAD_PTR; // the pointer must be defined and initialized elsewhere +# endif + +#endif // _CHIBIOS_RT_ || _CHIBIOS_NIL_ + +#endif // _IRMPCONFIG_STAGE2_H_ |