diff options
Diffstat (limited to 'decoders/caliper/__init__.py')
| -rw-r--r-- | decoders/caliper/__init__.py | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/decoders/caliper/__init__.py b/decoders/caliper/__init__.py index 3fc99fe..44dab08 100644 --- a/decoders/caliper/__init__.py +++ b/decoders/caliper/__init__.py @@ -18,17 +18,17 @@ ## ''' -This decodes digital output of cheap generic calipers (usualy made in china) -Decoder will show measured value in milimeters or inches. +This decoder interprets the digital output of cheap generic calipers +(usually made in China), and shows the measured value in millimeters +or inches. -Please note that these devices often communicate on low voltage level, -which might not be possible to capture with 3.3V logic analyzers. -So additional circuitry might be needed to capture the signal. +Notice that these devices often communicate on voltage levels below +3.3V and may require additional circuitry to capture the signal. -This is NOT for calipers using Digimatic protocol (eg. Mitutoyo and similar brands) - -More info: +This decoder does not work for calipers using the Digimatic protocol +(eg. Mitutoyo and similar brands). +For more information see: http://www.shumatech.com/support/chinese_scales.htm https://www.instructables.com/id/Reading-Digital-Callipers-with-an-Arduino-USB/ ''' |