Rename usb_protocol to usb_packet.

There will be further PDs that are stacked on top of usb_packet.

1 files changed, 0 insertions, 47 deletions

diff --git a/decoders/usb_protocol/__init__.py b/decoders/usb_protocol/__init__.py
deleted file mode 100644
index 5fa66f6..0000000
--- a/decoders/usb_protocol/__init__.py
+++ /dev/null
@@ -1,47 +0,0 @@
-##
-## This file is part of the libsigrokdecode project.
-##
-## Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-'''
-USB (low-speed and full-speed) protocol decoder.
-
-Protocol layer (USB spec, chapter 8):
-
-Bit/byte ordering: Bits are sent onto the bus LSB-first. Multibyte fields
-are transmitted in little-endian order (i.e., LSB to MSB).
-
-SYNC field: All packets begin with a SYNC field (8 bits).
-
-Packet field format: Packets start with an SOP (Start Of Packet) delimiter
-that is part of the SYNC field, and end with an EOP (End Of Packet).
-
-PID: A PID (packet identifier) follows the SYNC field of every packet. A PID
-consists of a 4-bit packet type field, and a 4 bit check field.
-The check field is the one's complement of the packet type field.
-
-Protocol output format:
-TODO
-
-Details:
-https://en.wikipedia.org/wiki/USB
-http://www.usb.org/developers/docs/
-'''
-
-from .pd import *
-