onewire: placing protocol layers into separate directories

4 files changed, 0 insertions, 830 deletions

diff --git a/decoders/onewire/Makefile.am b/decoders/onewire/Makefile.am
deleted file mode 100644
index 17b3b04..0000000
--- a/decoders/onewire/Makefile.am
+++ /dev/null
@@ -1,26 +0,0 @@
-##
-## This file is part of the sigrok project.
-##
-## Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-pkgdatadir = $(DECODERS_DIR)/onewire
-
-dist_pkgdata_DATA = __init__.py onewire_link.py onewire_network.py
-
-CLEANFILES = *.pyc
-
diff --git a/decoders/onewire/__init__.py b/decoders/onewire/__init__.py
deleted file mode 100644
index 0a712ef..0000000
--- a/decoders/onewire/__init__.py
+++ /dev/null
@@ -1,78 +0,0 @@
-##
-## This file is part of the sigrok project.
-##
-## Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-'''
-1-Wire protocol decoder.
-
-The 1-Wire protocol enables bidirectional communication over a single wire (and
-ground) between a single master and one or multiple slaves. The protocol is
-layered, the provided parser decodes the next layers:
-- Link layer (reset, presence detection, reading/writing bits)
-- Network layer (skip, search, match device ROM addresses)
-The higher layers (transport, presentation) are not decoded, since they are
-mostly device specific and it would take a lot of code to interpret them.
-
-Sample rate:
-A high enough sample rate is required to properly detect all the elements of
-the protocol. A lower sample rate can be used if the master does not use
-overdrive communication speed. The next minimal values should be used:
-- overdrive     available:   2MHz minimum, 5MHz suggested
-- overdrive not available: 400kHz minimum, 1MHz suggested
-
-Probes:
-1-Wire requires a single signal, but some master implementations might have a
-separate signal use to deliver power to the bus during temperature conversion
-as an example. This power signal is currently not parsed.
-- owr (1-Wire bus)
-- pwr (1-Wire power)
-
-Options:
-1-Wire is an asynchronous protocol, so the decoder must know the sample rate.
-The timing for sampling bits, presence and reset is calculated by the decoder,
-but in case the user wishes to use different values, it is possible to
-configure the next timing values (number of sample rate periods):
-- overdrive              (if active the decoder will be prepared for overdrive)
-- cnt_normal_bit         (time for normal mode sample bit)
-- cnt_normal_presence    (time for normal mode sample presence)
-- cnt_normal_reset       (time for normal mode reset)
-- cnt_overdrive_bit      (time for overdrive mode sample bit)
-- cnt_overdrive_presence (time for overdrive mode sample presence)
-- cnt_overdrive_reset    (time for overdrive mode reset)
-This options should be configured only on very rare cases and the user should
-read the decoder source code to understand them correctly.
-
-Annotations:
-Annotations can be shown for each layer of the protocol separately:
-- link (the value of each transmitted bit is shown separately)
-- network (the ROM command, and address are shown)
-- transport (only transport layer byte transfers are shown)
-If link layer annotations are shown, possible issues with sample rate and sample
-timing are also shown.
-
-TODO:
-- add CRC checks for network layer
-- add transport layer code
-- review link layer code, to check for protocol correctness
-- define output protocol
-'''
-
-from .onewire_link    import *
-from .onewire_network import *
-
diff --git a/decoders/onewire/onewire_link.py b/decoders/onewire/onewire_link.py
deleted file mode 100644
index e1972a8..0000000
--- a/decoders/onewire/onewire_link.py
+++ /dev/null
@@ -1,363 +0,0 @@
-##
-## This file is part of the sigrok project.
-##
-## Copyright (C) 2012 Iztok Jeras <iztok.jeras@gmail.com>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-# 1-Wire protocol decoder
-
-import sigrokdecode as srd
-
-# Annotation feed formats
-ANN_LINK      = 0
-ANN_NETWORK   = 1
-ANN_TRANSPORT = 2
-
-# a dictionary of ROM commands and their names
-rom_command = {0x33: "READ ROM",
-               0x0f: "CONDITIONAL READ ROM",
-               0xcc: "SKIP ROM",
-               0x55: "MATCH ROM",
-               0xf0: "SEARCH ROM",
-               0xec: "CONDITIONAL SEARCH ROM",
-               0x3c: "OVERDRIVE SKIP ROM",
-               0x6d: "OVERDRIVE MATCH ROM"}
-
-class Decoder(srd.Decoder):
-    api_version = 1
-    id = 'onewire'
-    name = '1-Wire'
-    longname = '1-Wire serial communication bus'
-    desc = 'Bidirectional, half-duplex, asynchronous serial bus.'
-    license = 'gplv2+'
-    inputs = ['logic']
-    outputs = ['onewire']
-    probes = [
-        {'id': 'owr', 'name': 'OWR', 'desc': '1-Wire bus'},
-    ]
-    optional_probes = [
-        {'id': 'pwr', 'name': 'PWR', 'desc': '1-Wire power'},
-    ]
-    options = {
-        'overdrive' : ['Overdrive', 1],
-        'cnt_normal_bit'        : ['Time (in samplerate periods) for normal mode sample bit'     , 0],
-        'cnt_normal_presence'   : ['Time (in samplerate periods) for normal mode sample presence', 0],
-        'cnt_normal_reset'      : ['Time (in samplerate periods) for normal mode reset'          , 0],
-        'cnt_overdrive_bit'     : ['Time (in samplerate periods) for overdrive mode sample bit'     , 0],
-        'cnt_overdrive_presence': ['Time (in samplerate periods) for overdrive mode sample presence', 0],
-        'cnt_overdrive_reset'   : ['Time (in samplerate periods) for overdrive mode reset'          , 0],
-    }
-    annotations = [
-        ['Link', 'Link layer events (reset, presence, bit slots)'],
-        ['Network', 'Network layer events (device addressing)'],
-        ['Transport', 'Transport layer events'],
-    ]
-
-    def __init__(self, **kwargs):
-        # Common variables
-        self.samplenum = 0
-        # Link layer variables
-        self.lnk_state   = 'WAIT FOR FALLING EDGE'
-        self.lnk_event   = 'NONE'
-        self.lnk_present = 0
-        self.lnk_bit     = 0
-        self.lnk_overdrive = 0
-        # Event timing variables
-        self.lnk_fall    = 0
-        self.lnk_rise    = 0
-        self.net_beg     = 0
-        self.net_end     = 0
-        self.net_len     = 0
-        # Network layer variables
-        self.net_state   = 'IDLE'
-        self.net_cnt     = 0
-        self.net_search  = "P"
-        self.net_data_p  = 0x0
-        self.net_data_n  = 0x0
-        self.net_data    = 0x0
-        self.net_rom     = 0x0000000000000000
-
-    def start(self, metadata):
-        self.out_proto = self.add(srd.OUTPUT_PROTO, 'onewire')
-        self.out_ann   = self.add(srd.OUTPUT_ANN  , 'onewire')
-
-        # check if samplerate is appropriate
-        self.samplerate = metadata['samplerate']
-        if (self.options['overdrive']):
-            self.put(0, 0, self.out_ann, [ANN_LINK,
-              ['NOTE: Sample rate checks assume overdrive mode.']])
-            if   (self.samplerate < 2000000):
-                self.put(0, 0, self.out_ann, [ANN_LINK,
-                  ['ERROR: Sampling rate is too low must be above 2MHz for proper overdrive mode decoding.']])
-            elif (self.samplerate < 5000000):
-                self.put(0, 0, self.out_ann, [ANN_LINK,
-                  ['WARNING: Sampling rate is suggested to be above 5MHz for proper overdrive mode decoding.']])
-        else:
-            self.put(0, 0, self.out_ann, [ANN_LINK,
-              ['NOTE: Sample rate checks assume normal mode only.']])
-            if   (self.samplerate <  400000):
-                self.put(0, 0, self.out_ann, [ANN_LINK,
-                  ['ERROR: Sampling rate is too low must be above 400kHz for proper normal mode decoding.']])
-            elif (self.samplerate < 1000000):
-                self.put(0, 0, self.out_ann, [ANN_LINK,
-                  ['WARNING: Sampling rate is suggested to be above 1MHz for proper normal mode decoding.']])
-
-        # The default 1-Wire time base is 30us, this is used to calculate sampling times.
-        if (self.options['cnt_normal_bit']):
-            self.cnt_normal_bit = self.options['cnt_normal_bit']
-        else:
-            self.cnt_normal_bit = int(float(self.samplerate) * 0.000015) - 1 # 15ns
-        if (self.options['cnt_normal_presence']):
-            self.cnt_normal_presence = self.options['cnt_normal_presence']
-        else:
-            self.cnt_normal_presence = int(float(self.samplerate) * 0.000075) - 1 # 75ns
-        if (self.options['cnt_normal_reset']):
-            self.cnt_normal_reset = self.options['cnt_normal_reset']
-        else:
-            self.cnt_normal_reset = int(float(self.samplerate) * 0.000480) - 1 # 480ns
-        if (self.options['cnt_overdrive_bit']):
-            self.cnt_overdrive_bit = self.options['cnt_overdrive_bit']
-        else:
-            self.cnt_overdrive_bit = int(float(self.samplerate) * 0.000002) - 1 # 2ns
-        if (self.options['cnt_overdrive_presence']):
-            self.cnt_overdrive_presence = self.options['cnt_overdrive_presence']
-        else:
-            self.cnt_overdrive_presence = int(float(self.samplerate) * 0.000010) - 1 # 10ns
-        if (self.options['cnt_overdrive_reset']):
-            self.cnt_overdrive_reset = self.options['cnt_overdrive_reset']
-        else:
-            self.cnt_overdrive_reset = int(float(self.samplerate) * 0.000048) - 1 # 48ns
-
-        # calculating the slot size
-        self.cnt_normal_slot    = int(float(self.samplerate) * 0.000060) - 1 # 60ns
-        self.cnt_overdrive_slot = int(float(self.samplerate) * 0.000006) - 1 #  6ns
-
-        # organize values into lists
-        self.cnt_bit      = [self.cnt_normal_bit     , self.cnt_overdrive_bit     ]
-        self.cnt_presence = [self.cnt_normal_presence, self.cnt_overdrive_presence]
-        self.cnt_reset    = [self.cnt_normal_reset   , self.cnt_overdrive_reset   ]
-        self.cnt_slot     = [self.cnt_normal_slot    , self.cnt_overdrive_slot    ]
-
-        # Check if sample times are in the allowed range
-        time_min = float(self.cnt_normal_bit  ) / self.samplerate
-        time_max = float(self.cnt_normal_bit+1) / self.samplerate
-        if ( (time_min < 0.000005) or (time_max > 0.000015) ) :
-           self.put(0, 0, self.out_ann, [ANN_LINK,
-             ['WARNING: The normal mode data sample time interval (%2.1fus-%2.1fus) should be inside (5.0us, 15.0us).'
-               % (time_min*1000000, time_max*1000000)]])
-        time_min = float(self.cnt_normal_presence  ) / self.samplerate
-        time_max = float(self.cnt_normal_presence+1) / self.samplerate
-        if ( (time_min < 0.0000681) or (time_max > 0.000075) ) :
-           self.put(0, 0, self.out_ann, [ANN_LINK,
-             ['WARNING: The normal mode presence sample time interval (%2.1fus-%2.1fus) should be inside (68.1us, 75.0us).'
-               % (time_min*1000000, time_max*1000000)]])
-        time_min = float(self.cnt_overdrive_bit  ) / self.samplerate
-        time_max = float(self.cnt_overdrive_bit+1) / self.samplerate
-        if ( (time_min < 0.000001) or (time_max > 0.000002) ) :
-           self.put(0, 0, self.out_ann, [ANN_LINK,
-             ['WARNING: The overdrive mode data sample time interval (%2.1fus-%2.1fus) should be inside (1.0us, 2.0us).'
-               % (time_min*1000000, time_max*1000000)]])
-        time_min = float(self.cnt_overdrive_presence  ) / self.samplerate
-        time_max = float(self.cnt_overdrive_presence+1) / self.samplerate
-        if ( (time_min < 0.0000073) or (time_max > 0.000010) ) :
-           self.put(0, 0, self.out_ann, [ANN_LINK,
-             ['WARNING: The overdrive mode presence sample time interval (%2.1fus-%2.1fus) should be inside (7.3us, 10.0us).'
-               % (time_min*1000000, time_max*1000000)]])
-
-    def report(self):
-        pass
-
-    def decode(self, ss, es, data):
-        for (self.samplenum, (owr, pwr)) in data:
-
-            # Data link layer
-
-            # Clear events.
-            self.lnk_event = "NONE"
-            # State machine.
-            if self.lnk_state == 'WAIT FOR FALLING EDGE':
-                # The start of a cycle is a falling edge.
-                if (owr == 0):
-                    # Save the sample number for the falling edge.
-                    self.lnk_fall = self.samplenum
-                    # Go to waiting for sample time
-                    self.lnk_state = 'WAIT FOR DATA SAMPLE'
-            elif self.lnk_state == 'WAIT FOR DATA SAMPLE':
-                # Sample data bit
-                if (self.samplenum - self.lnk_fall == self.cnt_bit[self.lnk_overdrive]):
-                    self.lnk_bit  = owr & 0x1
-                    self.lnk_event = "DATA BIT"
-                    if (self.lnk_bit):  self.lnk_state = 'WAIT FOR FALLING EDGE'
-                    else             :  self.lnk_state = 'WAIT FOR RISING EDGE'
-                    self.put(self.lnk_fall, self.cnt_bit[self.lnk_overdrive], self.out_ann, [ANN_LINK, ['BIT: %01x' % self.lnk_bit]])
-            elif self.lnk_state == 'WAIT FOR RISING EDGE':
-                # The end of a cycle is a rising edge.
-                if (owr == 1):
-                    # Check if this was a reset cycle
-                    if (self.samplenum - self.lnk_fall > self.cnt_normal_reset):
-                        # Save the sample number for the falling edge.
-                        self.lnk_rise = self.samplenum
-                        # Send a reset event to the next protocol layer.
-                        self.lnk_event = "RESET"
-                        self.lnk_state = "WAIT FOR PRESENCE DETECT"
-                        self.put(self.lnk_fall, self.lnk_rise, self.out_proto, ['RESET'])
-                        self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_LINK     , ['RESET']])
-                        self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_NETWORK  , ['RESET']])
-                        # Reset the timer.
-                        self.lnk_fall = self.samplenum
-                    elif ((self.samplenum - self.lnk_fall > self.cnt_overdrive_reset) and (self.lnk_overdrive)):
-                        # Save the sample number for the falling edge.
-                        self.lnk_rise = self.samplenum
-                        # Send a reset event to the next protocol layer.
-                        self.lnk_event = "RESET"
-                        self.lnk_state = "WAIT FOR PRESENCE DETECT"
-                        self.put(self.lnk_fall, self.lnk_rise, self.out_proto, ['RESET OVERDRIVE'])
-                        self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_LINK     , ['RESET OVERDRIVE']])
-                        self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_NETWORK  , ['RESET OVERDRIVE']])
-                        # Reset the timer.
-                        self.lnk_fall = self.samplenum
-                    # Otherwise this is assumed to be a data bit.
-                    else :
-                        self.lnk_state = "WAIT FOR FALLING EDGE"
-            elif self.lnk_state == 'WAIT FOR PRESENCE DETECT':
-                # Sample presence status
-                if (self.samplenum - self.lnk_rise == self.cnt_presence[self.lnk_overdrive]):
-                    self.lnk_present = owr & 0x1
-                    # Save the sample number for the falling edge.
-                    if not (self.lnk_present) :  self.lnk_fall = self.samplenum
-                    # create presence detect event
-                    #self.lnk_event   = "PRESENCE DETECT"
-                    if (self.lnk_present) :  self.lnk_state = 'WAIT FOR FALLING EDGE'
-                    else                  :  self.lnk_state = 'WAIT FOR RISING EDGE'
-                    present_str = "False" if self.lnk_present else "True"
-                    self.put(self.samplenum, 0, self.out_ann, [ANN_LINK   , ['PRESENCE: ' + present_str]])
-                    self.put(self.samplenum, 0, self.out_ann, [ANN_NETWORK, ['PRESENCE: ' + present_str]])
-            else:
-                raise Exception('Invalid lnk_state: %d' % self.lnk_state)
-
-            # Network layer
-
-            # State machine.
-            if (self.lnk_event == "RESET"):
-                self.net_state = "COMMAND"
-                self.net_search = "P"
-                self.net_cnt    = 0
-            elif (self.net_state == "IDLE"):
-                pass
-            elif (self.net_state == "COMMAND"):
-                # Receiving and decoding a ROM command
-                if (self.onewire_collect(8)):
-                    self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK,
-                      ['ROM COMMAND: 0x%02x \'%s\'' % (self.net_data, rom_command[self.net_data])]])
-                    if   (self.net_data == 0x33):  # READ ROM
-                        self.net_state = "GET ROM"
-                    elif (self.net_data == 0x0f):  # CONDITIONAL READ ROM
-                        self.net_state = "GET ROM"
-                    elif (self.net_data == 0xcc):  # SKIP ROM
-                        self.net_state = "TRANSPORT"
-                    elif (self.net_data == 0x55):  # MATCH ROM
-                        self.net_state = "GET ROM"
-                    elif (self.net_data == 0xf0):  # SEARCH ROM
-                        self.net_state = "SEARCH ROM"
-                    elif (self.net_data == 0xec):  # CONDITIONAL SEARCH ROM
-                        self.net_state = "SEARCH ROM"
-                    elif (self.net_data == 0x3c):  # OVERDRIVE SKIP ROM
-                        self.lnk_overdrive = 1
-                        self.net_state = "TRANSPORT"
-                    elif (self.net_data == 0x69):  # OVERDRIVE MATCH ROM
-                        self.lnk_overdrive = 1
-                        self.net_state = "GET ROM"
-            elif (self.net_state == "GET ROM"):
-                # A 64 bit device address is selected
-                # family code (1B) + serial number (6B) + CRC (1B)
-                if (self.onewire_collect(64)):
-                    self.net_rom = self.net_data & 0xffffffffffffffff
-                    self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]])
-                    self.net_state = "TRANSPORT"
-            elif (self.net_state == "SEARCH ROM"):
-                # A 64 bit device address is searched for
-                # family code (1B) + serial number (6B) + CRC (1B)
-                if (self.onewire_search(64)):
-                    self.net_rom = self.net_data & 0xffffffffffffffff
-                    self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]])
-                    self.net_state = "TRANSPORT"
-            elif (self.net_state == "TRANSPORT"):
-                # The transport layer is handled in byte sized units
-                if (self.onewire_collect(8)):
-                    self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK  , ['TRANSPORT: 0x%02x' % self.net_data]])
-                    self.put(self.net_beg, self.net_len, self.out_ann, [ANN_TRANSPORT, ['TRANSPORT: 0x%02x' % self.net_data]])
-                    self.put(self.net_beg, self.net_len, self.out_proto, ['transfer', self.net_data])
-                    # TODO: Sending translort layer data to 1-Wire device models
-            else:
-                raise Exception('Invalid net_state: %s' % self.net_state)
-
-
-    # Link/Network layer data collector
-    def onewire_collect (self, length):
-        if (self.lnk_event == "DATA BIT"):
-            # Storing the sampe this sequence begins with
-            if (self.net_cnt == 1):
-                self.net_beg = self.lnk_fall
-            self.net_data = self.net_data & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
-            self.net_cnt  = self.net_cnt + 1
-            # Storing the sampe this sequence ends with
-            # In case the full length of the sequence is received, return 1
-            if (self.net_cnt == length):
-                self.net_end  = self.lnk_fall + self.cnt_slot[self.lnk_overdrive]
-                self.net_len  = self.net_end - self.net_beg
-                self.net_data = self.net_data & ((1<<length)-1)
-                self.net_cnt  = 0
-                return (1)
-            else:
-                return (0)
-        else:
-            return (0)
-
-    # Link/Network layer search collector
-    def onewire_search (self, length):
-        if (self.lnk_event == "DATA BIT"):
-            # Storing the sampe this sequence begins with
-            if ((self.net_cnt == 0) and (self.net_search == "P")):
-                self.net_beg  = self.lnk_fall
-            # Master receives an original address bit
-            if   (self.net_search == "P"):
-              self.net_data_p = self.net_data_p & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
-              self.net_search = "N"
-            # Master receives a complemented address bit
-            elif (self.net_search == "N"):
-              self.net_data_n = self.net_data_n & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
-              self.net_search = "D"
-            # Master transmits an address bit
-            elif (self.net_search == "D"):
-              self.net_data   = self.net_data   & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
-              self.net_search = "P"
-              self.net_cnt    = self.net_cnt + 1
-            # Storing the sampe this sequence ends with
-            # In case the full length of the sequence is received, return 1
-            if (self.net_cnt == length):
-                self.net_end    = self.lnk_fall + self.cnt_slot[self.lnk_overdrive]
-                self.net_len    = self.net_end - self.net_beg
-                self.net_data_p = self.net_data_p & ((1<<length)-1)
-                self.net_data_n = self.net_data_n & ((1<<length)-1)
-                self.net_data   = self.net_data   & ((1<<length)-1)
-                self.net_search = "P"
-                self.net_cnt    = 0
-                return (1)
-            else:
-                return (0)
-        else:
-            return (0)
diff --git a/decoders/onewire/onewire_network.py b/decoders/onewire/onewire_network.py
deleted file mode 100644
index e1972a8..0000000
--- a/decoders/onewire/onewire_network.py
+++ /dev/null
@@ -1,363 +0,0 @@
-##
-## This file is part of the sigrok project.
-##
-## Copyright (C) 2012 Iztok Jeras <iztok.jeras@gmail.com>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-# 1-Wire protocol decoder
-
-import sigrokdecode as srd
-
-# Annotation feed formats
-ANN_LINK      = 0
-ANN_NETWORK   = 1
-ANN_TRANSPORT = 2
-
-# a dictionary of ROM commands and their names
-rom_command = {0x33: "READ ROM",
-               0x0f: "CONDITIONAL READ ROM",
-               0xcc: "SKIP ROM",
-               0x55: "MATCH ROM",
-               0xf0: "SEARCH ROM",
-               0xec: "CONDITIONAL SEARCH ROM",
-               0x3c: "OVERDRIVE SKIP ROM",
-               0x6d: "OVERDRIVE MATCH ROM"}
-
-class Decoder(srd.Decoder):
-    api_version = 1
-    id = 'onewire'
-    name = '1-Wire'
-    longname = '1-Wire serial communication bus'
-    desc = 'Bidirectional, half-duplex, asynchronous serial bus.'
-    license = 'gplv2+'
-    inputs = ['logic']
-    outputs = ['onewire']
-    probes = [
-        {'id': 'owr', 'name': 'OWR', 'desc': '1-Wire bus'},
-    ]
-    optional_probes = [
-        {'id': 'pwr', 'name': 'PWR', 'desc': '1-Wire power'},
-    ]
-    options = {
-        'overdrive' : ['Overdrive', 1],
-        'cnt_normal_bit'        : ['Time (in samplerate periods) for normal mode sample bit'     , 0],
-        'cnt_normal_presence'   : ['Time (in samplerate periods) for normal mode sample presence', 0],
-        'cnt_normal_reset'      : ['Time (in samplerate periods) for normal mode reset'          , 0],
-        'cnt_overdrive_bit'     : ['Time (in samplerate periods) for overdrive mode sample bit'     , 0],
-        'cnt_overdrive_presence': ['Time (in samplerate periods) for overdrive mode sample presence', 0],
-        'cnt_overdrive_reset'   : ['Time (in samplerate periods) for overdrive mode reset'          , 0],
-    }
-    annotations = [
-        ['Link', 'Link layer events (reset, presence, bit slots)'],
-        ['Network', 'Network layer events (device addressing)'],
-        ['Transport', 'Transport layer events'],
-    ]
-
-    def __init__(self, **kwargs):
-        # Common variables
-        self.samplenum = 0
-        # Link layer variables
-        self.lnk_state   = 'WAIT FOR FALLING EDGE'
-        self.lnk_event   = 'NONE'
-        self.lnk_present = 0
-        self.lnk_bit     = 0
-        self.lnk_overdrive = 0
-        # Event timing variables
-        self.lnk_fall    = 0
-        self.lnk_rise    = 0
-        self.net_beg     = 0
-        self.net_end     = 0
-        self.net_len     = 0
-        # Network layer variables
-        self.net_state   = 'IDLE'
-        self.net_cnt     = 0
-        self.net_search  = "P"
-        self.net_data_p  = 0x0
-        self.net_data_n  = 0x0
-        self.net_data    = 0x0
-        self.net_rom     = 0x0000000000000000
-
-    def start(self, metadata):
-        self.out_proto = self.add(srd.OUTPUT_PROTO, 'onewire')
-        self.out_ann   = self.add(srd.OUTPUT_ANN  , 'onewire')
-
-        # check if samplerate is appropriate
-        self.samplerate = metadata['samplerate']
-        if (self.options['overdrive']):
-            self.put(0, 0, self.out_ann, [ANN_LINK,
-              ['NOTE: Sample rate checks assume overdrive mode.']])
-            if   (self.samplerate < 2000000):
-                self.put(0, 0, self.out_ann, [ANN_LINK,
-                  ['ERROR: Sampling rate is too low must be above 2MHz for proper overdrive mode decoding.']])
-            elif (self.samplerate < 5000000):
-                self.put(0, 0, self.out_ann, [ANN_LINK,
-                  ['WARNING: Sampling rate is suggested to be above 5MHz for proper overdrive mode decoding.']])
-        else:
-            self.put(0, 0, self.out_ann, [ANN_LINK,
-              ['NOTE: Sample rate checks assume normal mode only.']])
-            if   (self.samplerate <  400000):
-                self.put(0, 0, self.out_ann, [ANN_LINK,
-                  ['ERROR: Sampling rate is too low must be above 400kHz for proper normal mode decoding.']])
-            elif (self.samplerate < 1000000):
-                self.put(0, 0, self.out_ann, [ANN_LINK,
-                  ['WARNING: Sampling rate is suggested to be above 1MHz for proper normal mode decoding.']])
-
-        # The default 1-Wire time base is 30us, this is used to calculate sampling times.
-        if (self.options['cnt_normal_bit']):
-            self.cnt_normal_bit = self.options['cnt_normal_bit']
-        else:
-            self.cnt_normal_bit = int(float(self.samplerate) * 0.000015) - 1 # 15ns
-        if (self.options['cnt_normal_presence']):
-            self.cnt_normal_presence = self.options['cnt_normal_presence']
-        else:
-            self.cnt_normal_presence = int(float(self.samplerate) * 0.000075) - 1 # 75ns
-        if (self.options['cnt_normal_reset']):
-            self.cnt_normal_reset = self.options['cnt_normal_reset']
-        else:
-            self.cnt_normal_reset = int(float(self.samplerate) * 0.000480) - 1 # 480ns
-        if (self.options['cnt_overdrive_bit']):
-            self.cnt_overdrive_bit = self.options['cnt_overdrive_bit']
-        else:
-            self.cnt_overdrive_bit = int(float(self.samplerate) * 0.000002) - 1 # 2ns
-        if (self.options['cnt_overdrive_presence']):
-            self.cnt_overdrive_presence = self.options['cnt_overdrive_presence']
-        else:
-            self.cnt_overdrive_presence = int(float(self.samplerate) * 0.000010) - 1 # 10ns
-        if (self.options['cnt_overdrive_reset']):
-            self.cnt_overdrive_reset = self.options['cnt_overdrive_reset']
-        else:
-            self.cnt_overdrive_reset = int(float(self.samplerate) * 0.000048) - 1 # 48ns
-
-        # calculating the slot size
-        self.cnt_normal_slot    = int(float(self.samplerate) * 0.000060) - 1 # 60ns
-        self.cnt_overdrive_slot = int(float(self.samplerate) * 0.000006) - 1 #  6ns
-
-        # organize values into lists
-        self.cnt_bit      = [self.cnt_normal_bit     , self.cnt_overdrive_bit     ]
-        self.cnt_presence = [self.cnt_normal_presence, self.cnt_overdrive_presence]
-        self.cnt_reset    = [self.cnt_normal_reset   , self.cnt_overdrive_reset   ]
-        self.cnt_slot     = [self.cnt_normal_slot    , self.cnt_overdrive_slot    ]
-
-        # Check if sample times are in the allowed range
-        time_min = float(self.cnt_normal_bit  ) / self.samplerate
-        time_max = float(self.cnt_normal_bit+1) / self.samplerate
-        if ( (time_min < 0.000005) or (time_max > 0.000015) ) :
-           self.put(0, 0, self.out_ann, [ANN_LINK,
-             ['WARNING: The normal mode data sample time interval (%2.1fus-%2.1fus) should be inside (5.0us, 15.0us).'
-               % (time_min*1000000, time_max*1000000)]])
-        time_min = float(self.cnt_normal_presence  ) / self.samplerate
-        time_max = float(self.cnt_normal_presence+1) / self.samplerate
-        if ( (time_min < 0.0000681) or (time_max > 0.000075) ) :
-           self.put(0, 0, self.out_ann, [ANN_LINK,
-             ['WARNING: The normal mode presence sample time interval (%2.1fus-%2.1fus) should be inside (68.1us, 75.0us).'
-               % (time_min*1000000, time_max*1000000)]])
-        time_min = float(self.cnt_overdrive_bit  ) / self.samplerate
-        time_max = float(self.cnt_overdrive_bit+1) / self.samplerate
-        if ( (time_min < 0.000001) or (time_max > 0.000002) ) :
-           self.put(0, 0, self.out_ann, [ANN_LINK,
-             ['WARNING: The overdrive mode data sample time interval (%2.1fus-%2.1fus) should be inside (1.0us, 2.0us).'
-               % (time_min*1000000, time_max*1000000)]])
-        time_min = float(self.cnt_overdrive_presence  ) / self.samplerate
-        time_max = float(self.cnt_overdrive_presence+1) / self.samplerate
-        if ( (time_min < 0.0000073) or (time_max > 0.000010) ) :
-           self.put(0, 0, self.out_ann, [ANN_LINK,
-             ['WARNING: The overdrive mode presence sample time interval (%2.1fus-%2.1fus) should be inside (7.3us, 10.0us).'
-               % (time_min*1000000, time_max*1000000)]])
-
-    def report(self):
-        pass
-
-    def decode(self, ss, es, data):
-        for (self.samplenum, (owr, pwr)) in data:
-
-            # Data link layer
-
-            # Clear events.
-            self.lnk_event = "NONE"
-            # State machine.
-            if self.lnk_state == 'WAIT FOR FALLING EDGE':
-                # The start of a cycle is a falling edge.
-                if (owr == 0):
-                    # Save the sample number for the falling edge.
-                    self.lnk_fall = self.samplenum
-                    # Go to waiting for sample time
-                    self.lnk_state = 'WAIT FOR DATA SAMPLE'
-            elif self.lnk_state == 'WAIT FOR DATA SAMPLE':
-                # Sample data bit
-                if (self.samplenum - self.lnk_fall == self.cnt_bit[self.lnk_overdrive]):
-                    self.lnk_bit  = owr & 0x1
-                    self.lnk_event = "DATA BIT"
-                    if (self.lnk_bit):  self.lnk_state = 'WAIT FOR FALLING EDGE'
-                    else             :  self.lnk_state = 'WAIT FOR RISING EDGE'
-                    self.put(self.lnk_fall, self.cnt_bit[self.lnk_overdrive], self.out_ann, [ANN_LINK, ['BIT: %01x' % self.lnk_bit]])
-            elif self.lnk_state == 'WAIT FOR RISING EDGE':
-                # The end of a cycle is a rising edge.
-                if (owr == 1):
-                    # Check if this was a reset cycle
-                    if (self.samplenum - self.lnk_fall > self.cnt_normal_reset):
-                        # Save the sample number for the falling edge.
-                        self.lnk_rise = self.samplenum
-                        # Send a reset event to the next protocol layer.
-                        self.lnk_event = "RESET"
-                        self.lnk_state = "WAIT FOR PRESENCE DETECT"
-                        self.put(self.lnk_fall, self.lnk_rise, self.out_proto, ['RESET'])
-                        self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_LINK     , ['RESET']])
-                        self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_NETWORK  , ['RESET']])
-                        # Reset the timer.
-                        self.lnk_fall = self.samplenum
-                    elif ((self.samplenum - self.lnk_fall > self.cnt_overdrive_reset) and (self.lnk_overdrive)):
-                        # Save the sample number for the falling edge.
-                        self.lnk_rise = self.samplenum
-                        # Send a reset event to the next protocol layer.
-                        self.lnk_event = "RESET"
-                        self.lnk_state = "WAIT FOR PRESENCE DETECT"
-                        self.put(self.lnk_fall, self.lnk_rise, self.out_proto, ['RESET OVERDRIVE'])
-                        self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_LINK     , ['RESET OVERDRIVE']])
-                        self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_NETWORK  , ['RESET OVERDRIVE']])
-                        # Reset the timer.
-                        self.lnk_fall = self.samplenum
-                    # Otherwise this is assumed to be a data bit.
-                    else :
-                        self.lnk_state = "WAIT FOR FALLING EDGE"
-            elif self.lnk_state == 'WAIT FOR PRESENCE DETECT':
-                # Sample presence status
-                if (self.samplenum - self.lnk_rise == self.cnt_presence[self.lnk_overdrive]):
-                    self.lnk_present = owr & 0x1
-                    # Save the sample number for the falling edge.
-                    if not (self.lnk_present) :  self.lnk_fall = self.samplenum
-                    # create presence detect event
-                    #self.lnk_event   = "PRESENCE DETECT"
-                    if (self.lnk_present) :  self.lnk_state = 'WAIT FOR FALLING EDGE'
-                    else                  :  self.lnk_state = 'WAIT FOR RISING EDGE'
-                    present_str = "False" if self.lnk_present else "True"
-                    self.put(self.samplenum, 0, self.out_ann, [ANN_LINK   , ['PRESENCE: ' + present_str]])
-                    self.put(self.samplenum, 0, self.out_ann, [ANN_NETWORK, ['PRESENCE: ' + present_str]])
-            else:
-                raise Exception('Invalid lnk_state: %d' % self.lnk_state)
-
-            # Network layer
-
-            # State machine.
-            if (self.lnk_event == "RESET"):
-                self.net_state = "COMMAND"
-                self.net_search = "P"
-                self.net_cnt    = 0
-            elif (self.net_state == "IDLE"):
-                pass
-            elif (self.net_state == "COMMAND"):
-                # Receiving and decoding a ROM command
-                if (self.onewire_collect(8)):
-                    self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK,
-                      ['ROM COMMAND: 0x%02x \'%s\'' % (self.net_data, rom_command[self.net_data])]])
-                    if   (self.net_data == 0x33):  # READ ROM
-                        self.net_state = "GET ROM"
-                    elif (self.net_data == 0x0f):  # CONDITIONAL READ ROM
-                        self.net_state = "GET ROM"
-                    elif (self.net_data == 0xcc):  # SKIP ROM
-                        self.net_state = "TRANSPORT"
-                    elif (self.net_data == 0x55):  # MATCH ROM
-                        self.net_state = "GET ROM"
-                    elif (self.net_data == 0xf0):  # SEARCH ROM
-                        self.net_state = "SEARCH ROM"
-                    elif (self.net_data == 0xec):  # CONDITIONAL SEARCH ROM
-                        self.net_state = "SEARCH ROM"
-                    elif (self.net_data == 0x3c):  # OVERDRIVE SKIP ROM
-                        self.lnk_overdrive = 1
-                        self.net_state = "TRANSPORT"
-                    elif (self.net_data == 0x69):  # OVERDRIVE MATCH ROM
-                        self.lnk_overdrive = 1
-                        self.net_state = "GET ROM"
-            elif (self.net_state == "GET ROM"):
-                # A 64 bit device address is selected
-                # family code (1B) + serial number (6B) + CRC (1B)
-                if (self.onewire_collect(64)):
-                    self.net_rom = self.net_data & 0xffffffffffffffff
-                    self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]])
-                    self.net_state = "TRANSPORT"
-            elif (self.net_state == "SEARCH ROM"):
-                # A 64 bit device address is searched for
-                # family code (1B) + serial number (6B) + CRC (1B)
-                if (self.onewire_search(64)):
-                    self.net_rom = self.net_data & 0xffffffffffffffff
-                    self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]])
-                    self.net_state = "TRANSPORT"
-            elif (self.net_state == "TRANSPORT"):
-                # The transport layer is handled in byte sized units
-                if (self.onewire_collect(8)):
-                    self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK  , ['TRANSPORT: 0x%02x' % self.net_data]])
-                    self.put(self.net_beg, self.net_len, self.out_ann, [ANN_TRANSPORT, ['TRANSPORT: 0x%02x' % self.net_data]])
-                    self.put(self.net_beg, self.net_len, self.out_proto, ['transfer', self.net_data])
-                    # TODO: Sending translort layer data to 1-Wire device models
-            else:
-                raise Exception('Invalid net_state: %s' % self.net_state)
-
-
-    # Link/Network layer data collector
-    def onewire_collect (self, length):
-        if (self.lnk_event == "DATA BIT"):
-            # Storing the sampe this sequence begins with
-            if (self.net_cnt == 1):
-                self.net_beg = self.lnk_fall
-            self.net_data = self.net_data & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
-            self.net_cnt  = self.net_cnt + 1
-            # Storing the sampe this sequence ends with
-            # In case the full length of the sequence is received, return 1
-            if (self.net_cnt == length):
-                self.net_end  = self.lnk_fall + self.cnt_slot[self.lnk_overdrive]
-                self.net_len  = self.net_end - self.net_beg
-                self.net_data = self.net_data & ((1<<length)-1)
-                self.net_cnt  = 0
-                return (1)
-            else:
-                return (0)
-        else:
-            return (0)
-
-    # Link/Network layer search collector
-    def onewire_search (self, length):
-        if (self.lnk_event == "DATA BIT"):
-            # Storing the sampe this sequence begins with
-            if ((self.net_cnt == 0) and (self.net_search == "P")):
-                self.net_beg  = self.lnk_fall
-            # Master receives an original address bit
-            if   (self.net_search == "P"):
-              self.net_data_p = self.net_data_p & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
-              self.net_search = "N"
-            # Master receives a complemented address bit
-            elif (self.net_search == "N"):
-              self.net_data_n = self.net_data_n & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
-              self.net_search = "D"
-            # Master transmits an address bit
-            elif (self.net_search == "D"):
-              self.net_data   = self.net_data   & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
-              self.net_search = "P"
-              self.net_cnt    = self.net_cnt + 1
-            # Storing the sampe this sequence ends with
-            # In case the full length of the sequence is received, return 1
-            if (self.net_cnt == length):
-                self.net_end    = self.lnk_fall + self.cnt_slot[self.lnk_overdrive]
-                self.net_len    = self.net_end - self.net_beg
-                self.net_data_p = self.net_data_p & ((1<<length)-1)
-                self.net_data_n = self.net_data_n & ((1<<length)-1)
-                self.net_data   = self.net_data   & ((1<<length)-1)
-                self.net_search = "P"
-                self.net_cnt    = 0
-                return (1)
-            else:
-                return (0)
-        else:
-            return (0)