Move common/ directory into decoders/.

This simplifies cross-platform handling of the Python/decoder paths
and module installation/dist a bit and also fixes bug #804.

2 files changed, 0 insertions, 207 deletions

diff --git a/common/sdcard/__init__.py b/common/sdcard/__init__.py
deleted file mode 100644
index cf09d9d..0000000
--- a/common/sdcard/__init__.py
+++ /dev/null
@@ -1,21 +0,0 @@
-##
-## This file is part of the libsigrokdecode project.
-##
-## Copyright (C) 2012-2014 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-from .mod import *
diff --git a/common/sdcard/mod.py b/common/sdcard/mod.py
deleted file mode 100644
index f553cf1..0000000
--- a/common/sdcard/mod.py
+++ /dev/null
@@ -1,186 +0,0 @@
-##
-## This file is part of the libsigrokdecode project.
-##
-## Copyright (C) 2012-2014 Uwe Hermann <uwe@hermann-uwe.de>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-##
-
-# Normal commands (CMD)
-# Unlisted items are 'Reserved' as per SD spec. The 'Unknown' items don't
-# seem to be mentioned in the spec, but aren't marked as reserved either.
-cmd_names = {
-    0:  'GO_IDLE_STATE',
-    1:  'SEND_OP_COND', # Reserved in SD mode
-    2:  'ALL_SEND_CID',
-    3:  'SEND_RELATIVE_ADDR',
-    4:  'SET_DSR',
-    5:  'IO_SEND_OP_COND', # SDIO-only
-    6:  'SWITCH_FUNC', # New since spec 1.10
-    7:  'SELECT/DESELECT_CARD',
-    8:  'SEND_IF_COND',
-    9:  'SEND_CSD',
-    10: 'SEND_CID',
-    11: 'VOLTAGE_SWITCH',
-    12: 'STOP_TRANSMISSION',
-    13: 'SEND_STATUS',
-    # 14: Reserved
-    15: 'GO_INACTIVE_STATE',
-    16: 'SET_BLOCKLEN',
-    17: 'READ_SINGLE_BLOCK',
-    18: 'READ_MULTIPLE_BLOCK',
-    19: 'SEND_TUNING_BLOCK',
-    20: 'SPEED_CLASS_CONTROL',
-    # 21-22: Reserved
-    23: 'SET_BLOCK_COUNT',
-    24: 'WRITE_BLOCK',
-    25: 'WRITE_MULTIPLE_BLOCK',
-    26: 'Reserved for manufacturer',
-    27: 'PROGRAM_CSD',
-    28: 'SET_WRITE_PROT',
-    29: 'CLR_WRITE_PROT',
-    30: 'SEND_WRITE_PROT',
-    # 31: Reserved
-    32: 'ERASE_WR_BLK_START', # SPI mode: ERASE_WR_BLK_START_ADDR
-    33: 'ERASE_WR_BLK_END', # SPI mode: ERASE_WR_BLK_END_ADDR
-    34: 'Reserved for CMD6', # New since spec 1.10
-    35: 'Reserved for CMD6', # New since spec 1.10
-    36: 'Reserved for CMD6', # New since spec 1.10
-    37: 'Reserved for CMD6', # New since spec 1.10
-    38: 'ERASE',
-    # 39: Reserved
-    40: 'Reserved for security specification',
-    # 41: Reserved
-    42: 'LOCK_UNLOCK',
-    # 43-49: Reserved
-    50: 'Reserved for CMD6', # New since spec 1.10
-    # 51: Reserved
-    52: 'IO_RW_DIRECT', # SDIO-only
-    53: 'IO_RW_EXTENDED', # SDIO-only
-    54: 'Unknown',
-    55: 'APP_CMD',
-    56: 'GEN_CMD',
-    57: 'Reserved for CMD6', # New since spec 1.10
-    58: 'READ_OCR', # Reserved in SD mode
-    59: 'CRC_ON_OFF', # Reserved in SD mode
-    60: 'Reserved for manufacturer',
-    61: 'Reserved for manufacturer',
-    62: 'Reserved for manufacturer',
-    63: 'Reserved for manufacturer',
-}
-
-# Application-specific commands (ACMD)
-# Unlisted items are 'Reserved' as per SD spec. The 'Unknown' items don't
-# seem to be mentioned in the spec, but aren't marked as reserved either.
-acmd_names = {
-    # 1-5: Reserved
-    6:  'SET_BUS_WIDTH',
-    # 7-12: Reserved
-    13: 'SD_STATUS',
-    14: 'Reserved for Security Application',
-    15: 'Reserved for Security Application',
-    16: 'Reserved for Security Application',
-    # 17: Reserved
-    18: 'Reserved for SD security applications',
-    # 19-21: Reserved
-    22: 'SEND_NUM_WR_BLOCKS',
-    23: 'SET_WR_BLK_ERASE_COUNT',
-    # 24: Reserved
-    25: 'Reserved for SD security applications',
-    26: 'Reserved for SD security applications',
-    27: 'Reserved for security specification',
-    28: 'Reserved for security specification',
-    # 29: Reserved
-    30: 'Reserved for security specification',
-    31: 'Reserved for security specification',
-    32: 'Reserved for security specification',
-    33: 'Reserved for security specification',
-    34: 'Reserved for security specification',
-    35: 'Reserved for security specification',
-    # 36-37: Reserved
-    38: 'Reserved for SD security applications',
-    # 39-40: Reserved
-    41: 'SD_SEND_OP_COND',
-    42: 'SET_CLR_CARD_DETECT',
-    43: 'Reserved for SD security applications',
-    44: 'Reserved for SD security applications',
-    45: 'Reserved for SD security applications',
-    46: 'Reserved for SD security applications',
-    47: 'Reserved for SD security applications',
-    48: 'Reserved for SD security applications',
-    49: 'Reserved for SD security applications',
-    50: 'Unknown',
-    51: 'SEND_SCR',
-    52: 'Reserved for security specification',
-    53: 'Reserved for security specification',
-    54: 'Reserved for security specification',
-    55: 'Non-existant', # Doesn't exist (equivalent to CMD55)
-    56: 'Reserved for security specification',
-    57: 'Reserved for security specification',
-    58: 'Reserved for security specification',
-    59: 'Reserved for security specification',
-    60: 'Unknown',
-    61: 'Unknown',
-    62: 'Unknown',
-    63: 'Unknown',
-}
-
-accepted_voltages = {
-    0b0001: '2.7-3.6V',
-    0b0010: 'reserved for low voltage range',
-    0b0100: 'reserved',
-    0b1000: 'reserved',
-    # All other values: "not defined".
-}
-
-card_status = {
-    0:  'Reserved for manufacturer test mode',
-    1:  'Reserved for manufacturer test mode',
-    2:  'Reserved for application specific commands',
-    3:  'AKE_SEQ_ERROR',
-    4:  'Reserved for SDIO card',
-    5:  'APP_CMD',
-    6:  'Unknown',
-    7:  'Unknown',
-    8:  'READY_FOR_DATA',
-    9:  'CURRENT_STATE', # CURRENT_STATE is a 4-bit value (decimal: 0..15).
-    10: 'CURRENT_STATE',
-    11: 'CURRENT_STATE',
-    12: 'CURRENT_STATE',
-    13: 'ERASE_RESET',
-    14: 'CARD_ECC_DISABLED',
-    15: 'WP_ERASE_SKIP',
-    16: 'CSD_OVERWRITE',
-    17: 'Reserved for DEFERRED_RESPONSE', # See eSD addendum
-    18: 'Reserved',
-    19: 'ERROR',
-    20: 'CC_ERROR',
-    21: 'CARD_ECC_FAILED',
-    22: 'ILLEGAL_COMMAND',
-    23: 'COM_CRC_ERROR',
-    24: 'LOCK_UNLOCK_FAILED',
-    25: 'CARD_IS_LOCKED',
-    26: 'WP_VIOLATION',
-    27: 'ERASE_PARAM',
-    28: 'ERASE_SEQ_ERROR',
-    29: 'BLOCK_LEN_ERROR',
-    30: 'ADDRESS_ERROR',
-    31: 'OUT_OF_RANGE',
-}
-
-sd_status = {
-    # 311:0: Reserved for manufacturer
-    # 391:312: Reserved
-}