Move common/ directory into decoders/.

This simplifies cross-platform handling of the Python/decoder paths
and module installation/dist a bit and also fixes bug #804.

1 files changed, 0 insertions, 192 deletions

diff --git a/common/plugtrx/mod.py b/common/plugtrx/mod.py
deleted file mode 100644
index 3d1b66d..0000000
--- a/common/plugtrx/mod.py
+++ /dev/null
@@ -1,192 +0,0 @@
-##
-## This file is part of the libsigrokdecode project.
-##
-## Copyright (C) 2016 Bert Vermeulen <bert@biot.com>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 3 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, see <http://www.gnu.org/licenses/>.
-##
-
-# This module contains definitions for use by pluggable network adapters,
-# such as SFP, XFP etc.
-
-MODULE_ID = {
-    0x01: 'GBIC',
-    0x02: 'Integrated module/connector',
-    0x03: 'SFP',
-    0x04: '300-pin XBI',
-    0x05: 'XENPAK',
-    0x06: 'XFP',
-    0x07: 'XFF',
-    0x08: 'XFP-E',
-    0x09: 'XPAK',
-    0x0a: 'X2',
-}
-
-ALARM_THRESHOLDS = {
-    0:  'Temp high alarm',
-    2:  'Temp low alarm',
-    4:  'Temp high warning',
-    6:  'Temp low warning',
-    16: 'Bias high alarm',
-    18: 'Bias low alarm',
-    20: 'Bias high warning',
-    22: 'Bias low warning',
-    24: 'TX power high alarm',
-    26: 'TX power low alarm',
-    28: 'TX power high warning',
-    30: 'TX power low warning',
-    32: 'RX power high alarm',
-    34: 'RX power low alarm',
-    36: 'RX power high warning',
-    38: 'RX power low warning',
-    40: 'AUX 1 high alarm',
-    42: 'AUX 1 low alarm',
-    44: 'AUX 1 high warning',
-    46: 'AUX 1 low warning',
-    48: 'AUX 2 high alarm',
-    50: 'AUX 2 low alarm',
-    52: 'AUX 2 high warning',
-    54: 'AUX 2 low warning',
-}
-
-AD_READOUTS = {
-    0:  'Module temperature',
-    4:  'TX bias current',
-    6:  'Measured TX output power',
-    8:  'Measured RX input power',
-    10: 'AUX 1 measurement',
-    12: 'AUX 2 measurement',
-}
-
-GCS_BITS = [
-    'TX disable',
-    'Soft TX disable',
-    'MOD_NR',
-    'P_Down',
-    'Soft P_Down',
-    'Interrupt',
-    'RX_LOS',
-    'Data_Not_Ready',
-    'TX_NR',
-    'TX_Fault',
-    'TX_CDR not locked',
-    'RX_NR',
-    'RX_CDR not locked',
-]
-
-CONNECTOR = {
-    0x01:   'SC',
-    0x02:   'Fibre Channel style 1 copper',
-    0x03:   'Fibre Channel style 2 copper',
-    0x04:   'BNC/TNC',
-    0x05:   'Fibre Channel coax',
-    0x06:   'FiberJack',
-    0x07:   'LC',
-    0x08:   'MT-RJ',
-    0x09:   'MU',
-    0x0a:   'SG',
-    0x0b:   'Optical pigtail',
-    0x20:   'HSSDC II',
-    0x21:   'Copper pigtail',
-}
-
-TRANSCEIVER = [
-    # 10GB Ethernet
-    ['10GBASE-SR', '10GBASE-LR', '10GBASE-ER', '10GBASE-LRM', '10GBASE-SW',
-        '10GBASE-LW',   '10GBASE-EW'],
-    # 10GB Fibre Channel
-    ['1200-MX-SN-I', '1200-SM-LL-L', 'Extended Reach 1550 nm',
-        'Intermediate reach 1300 nm FP'],
-    # 10GB Copper
-    [],
-    # 10GB low speed
-    ['1000BASE-SX / 1xFC MMF', '1000BASE-LX / 1xFC SMF', '2xFC MMF',
-        '2xFC SMF', 'OC48-SR', 'OC48-IR', 'OC48-LR'],
-    # 10GB SONET/SDH interconnect
-    ['I-64.1r', 'I-64.1', 'I-64.2r', 'I-64.2', 'I-64.3', 'I-64.5'],
-    # 10GB SONET/SDH short haul
-    ['S-64.1', 'S-64.2a', 'S-64.2b', 'S-64.3a', 'S-64.3b', 'S-64.5a', 'S-64.5b'],
-    # 10GB SONET/SDH long haul
-    ['L-64.1', 'L-64.2a', 'L-64.2b', 'L-64.2c', 'L-64.3', 'G.959.1 P1L1-2D2'],
-    # 10GB SONET/SDH very long haul
-    ['V-64.2a', 'V-64.2b', 'V-64.3'],
-]
-
-SERIAL_ENCODING = [
-    '64B/66B',
-    '8B/10B',
-    'SONET scrambled',
-    'NRZ',
-    'RZ',
-]
-
-XMIT_TECH = [
-    '850 nm VCSEL',
-    '1310 nm VCSEL',
-    '1550 nm VCSEL',
-    '1310 nm FP',
-    '1310 nm DFB',
-    '1550 nm DFB',
-    '1310 nm EML'
-    '1550 nm EML'
-    'copper',
-]
-
-CDR = [
-    '9.95Gb/s',
-    '10.3Gb/s',
-    '10.5Gb/s',
-    '10.7Gb/s',
-    '11.1Gb/s',
-    '(unknown)',
-    'lineside loopback mode',
-    'XFI loopback mode',
-]
-
-DEVICE_TECH = [
-    ['no wavelength control', 'sctive wavelength control'],
-    ['uncooled transmitter device', 'cooled transmitter'],
-    ['PIN detector', 'APD detector'],
-    ['transmitter not tunable', 'transmitter tunable'],
-]
-
-ENHANCED_OPTS = [
-    'VPS',
-    'soft TX_DISABLE',
-    'soft P_Down',
-    'VPS LV regulator mode',
-    'VPS bypassed regulator mode',
-    'active FEC control',
-    'wavelength tunability',
-    'CMU',
-]
-
-AUX_TYPES = [
-    'not implemented',
-    'APD bias voltage',
-    '(unknown)',
-    'TEC current',
-    'laser temperature',
-    'laser wavelength',
-    '5V supply voltage',
-    '3.3V supply voltage',
-    '1.8V supply voltage',
-    '-5.2V supply voltage',
-    '5V supply current',
-    '(unknown)',
-    '(unknown)',
-    '3.3V supply current',
-    '1.8V supply current',
-    '-5.2V supply current',
-]