uart: Output data in separate RX and TX annotation types.

There is one annotation type for the RX side of the communication/data
output now, and another one for the TX side.

This allows GUIs to show them in two different traces, and/or show them in
the same trace but with different colors.

This also has the additional benefit that it is clear which databyte
belongs to which direction. Previously the annotations had to look like
"RX: 5F" or "TX: 11001011", but the "RX: " and "TX: " prefixes are now
no longer required, making the GUI traces (and CLI output too) much more
readable.

1 files changed, 12 insertions, 12 deletions

diff --git a/decoders/uart/pd.py b/decoders/uart/pd.py
index e67da57..6ecc8cf 100644
--- a/decoders/uart/pd.py
+++ b/decoders/uart/pd.py
@@ -97,7 +97,8 @@ class Decoder(srd.Decoder):
         # TODO: Options to invert the signal(s).
     }
     annotations = [
-        ['Data', 'UART data'],
+        ['RX data', 'UART RX data'],
+        ['TX data', 'UART TX data'],
         ['Start bits', 'UART start bits'],
         ['Parity bits', 'UART parity bits'],
         ['Stop bits', 'UART stop bits'],
@@ -188,7 +189,7 @@ class Decoder(srd.Decoder):
         self.state[rxtx] = 'GET DATA BITS'
 
         self.putp(['STARTBIT', rxtx, self.startbit[rxtx]])
-        self.putg([1, ['Start bit', 'Start', 'S']])
+        self.putg([2, ['Start bit', 'Start', 'S']])
 
     def get_data_bits(self, rxtx, signal):
         # Skip samples until we're in the middle of the desired data bit.
@@ -220,18 +221,17 @@ class Decoder(srd.Decoder):
 
         self.putp(['DATA', rxtx, self.databyte[rxtx]])
 
-        s = 'RX: ' if (rxtx == RX) else 'TX: '
         b, f = self.databyte[rxtx], self.options['format']
         if f == 'ascii':
-            self.putx(rxtx, [0, [s + chr(b)]])
+            self.putx(rxtx, [rxtx, [chr(b)]])
         elif f == 'dec':
-            self.putx(rxtx, [0, [s + str(b)]])
+            self.putx(rxtx, [rxtx, [str(b)]])
         elif f == 'hex':
-            self.putx(rxtx, [0, [s + hex(b)[2:].zfill(2).upper()]])
+            self.putx(rxtx, [rxtx, [hex(b)[2:].zfill(2).upper()]])
         elif f == 'oct':
-            self.putx(rxtx, [0, [s + oct(b)[2:].zfill(3)]])
+            self.putx(rxtx, [rxtx, [oct(b)[2:].zfill(3)]])
         elif f == 'bin':
-            self.putx(rxtx, [0, [s + bin(b)[2:].zfill(8)]])
+            self.putx(rxtx, [rxtx, [bin(b)[2:].zfill(8)]])
         else:
             raise Exception('Invalid data format option: %s' % f)
 
@@ -252,11 +252,11 @@ class Decoder(srd.Decoder):
         if parity_ok(self.options['parity_type'], self.paritybit[rxtx],
                      self.databyte[rxtx], self.options['num_data_bits']):
             self.putp(['PARITYBIT', rxtx, self.paritybit[rxtx]])
-            self.putg([2, ['Parity bit', 'Parity', 'P']])
+            self.putg([3, ['Parity bit', 'Parity', 'P']])
         else:
             # TODO: Return expected/actual parity values.
             self.putp(['PARITY ERROR', rxtx, (0, 1)]) # FIXME: Dummy tuple...
-            self.putg([4, ['Parity error', 'Parity err', 'PE']])
+            self.putg([5, ['Parity error', 'Parity err', 'PE']])
 
     # TODO: Currently only supports 1 stop bit.
     def get_stop_bits(self, rxtx, signal):
@@ -271,13 +271,13 @@ class Decoder(srd.Decoder):
         # Stop bits must be 1. If not, we report an error.
         if self.stopbit1[rxtx] != 1:
             self.putp(['INVALID STOPBIT', rxtx, self.stopbit1[rxtx]])
-            self.putg([4, ['Frame error', 'Frame err', 'FE']])
+            self.putg([5, ['Frame error', 'Frame err', 'FE']])
             # TODO: Abort? Ignore the frame? Other?
 
         self.state[rxtx] = 'WAIT FOR START BIT'
 
         self.putp(['STOPBIT', rxtx, self.stopbit1[rxtx]])
-        self.putg([3, ['Stop bit', 'Stop', 'T']])
+        self.putg([4, ['Stop bit', 'Stop', 'T']])
 
     def decode(self, ss, es, data):
         # TODO: Either RX or TX could be omitted (optional probe).