can_fd: add dumps and README

3 files changed, 59 insertions, 0 deletions

diff --git a/can/can_fd/arbitrary_traffic/README b/can/can_fd/arbitrary_traffic/README
new file mode 100644
index 0000000..8b98127
--- /dev/null
+++ b/can/can_fd/arbitrary_traffic/README
@@ -0,0 +1,59 @@
+-------------------------------------------------------------------------------
+Arbitrary CAN-FD bus traffic
+-------------------------------------------------------------------------------
+
+These captures are artifically generated CAN-FD messages and are not capturing
+specific vehicle or industrial protocols.
+
+Details:
+https://en.wikipedia.org/wiki/CAN_FD
+
+
+Logic analyzer setup
+--------------------
+
+The logic analyzer used was a Dreamsoucelab DSLogic Plus.
+
+Channel 0 was hooked up to a PEAK-PCAN-USB Pro CAN-FD device which has two
+CAN ports. Both ports were connected together using a selfmade circuit board.
+
+The bus was externally terminated by adding a 120 Ohm resistor between CAN_L
+and CAN_H.
+
+The data has been generated using PEAK PCAN-View v4.2.1.533 software running
+under Windows 7. Firmware on PCAN-USB Pro was v3.2.0. Driver version was 4.1.4.
+Both ports were opened by running two instances of the software. One for each
+port. All ACKs were handled by the participants.
+
+
+can_fd_without_brs_8.sr
+-----------------------
+
+This shows a single CAN-FD message with 8 Bytes of data without
+Bitrate Switch (BRS).
+
+Nominal bitrate: 1M (CLK: 80MHz, BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
+Data bitrate: 2M (ignored, since BRS is disabled)
+Extended frame: no
+BRS: no
+11898-1 ISO-mode: on
+ID: 0x42
+Length: 8 bytes
+Data is counting up from 0x00 to 0x07.
+
+
+can_fd_without_brs_64.sr
+------------------------
+
+This shows a single CAN-FD message with 64 bytes of data without
+Bitrate Switch (BRS).
+
+Nominal bitrate: 1M (CLK: 80MHz, BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%)
+Data bitrate: 2M (Ignored, since BRS is disabled)
+Extended frame: No
+BRS: no
+11898-1 ISO-mode: on
+ID: 0x42
+Length: 64 bytes
+Data is counting up from 0x00 to 0x3F.
+
diff --git a/can/can_fd/arbitrary_traffic/can_fd_without_brs_64.sr b/can/can_fd/arbitrary_traffic/can_fd_without_brs_64.sr
new file mode 100644
index 0000000..c86c832
--- /dev/null
+++ b/can/can_fd/arbitrary_traffic/can_fd_without_brs_64.sr
diff --git a/can/can_fd/arbitrary_traffic/can_fd_without_brs_8.sr b/can/can_fd/arbitrary_traffic/can_fd_without_brs_8.sr
new file mode 100644
index 0000000..ab98528
--- /dev/null
+++ b/can/can_fd/arbitrary_traffic/can_fd_without_brs_8.sr