summaryrefslogtreecommitdiff
path: root/decoder/test
AgeCommit message (Collapse)Author
2018-10-21spiflash: Updates due to recent PD chages.Uwe Hermann
2018-10-21spiflash: Add a few Winbond W25Q80DV tests.Uwe Hermann
2018-10-16uart: Update due to recent break condition support in the PD.Uwe Hermann
2018-10-13ook*: Update due to recent decoder changes.Uwe Hermann
2018-09-11Add a few ook_vis test-cases.Uwe Hermann
2018-09-11Add a few ook_oregon test-cases.Uwe Hermann
2018-09-11Add a few ook test-cases.Uwe Hermann
2018-09-09miller: Add a few test-cases.Uwe Hermann
2018-09-09cec: Tests for HDMI CEC protocol decoderJorge Solla
2018-09-09usb_power_delivery: Update to recent PD changes.Uwe Hermann
2018-09-09usb_power_delivery: Drop currently non-existing OUT_PYTHON.Uwe Hermann
2018-09-09usb_power_delivery: Add new testsPeetz0r
2018-09-09usb_power_delivery: Update tests to match new output of decoderPeetz0r
2018-09-06swim: Add test-cases for binary output.Uwe Hermann
2018-09-06Tests for the decoder for STM8 series MCUs SWIM protocol.Mike Jagdis
Signed-off-by: Mike Jagdis <mjagdis@eris-associates.co.uk> (github: mjagdis)
2018-08-29edid: Add acer_al711_on_dp_dm_hdmi_vga test-case.Uwe Hermann
2018-08-29edid: Update tests due to recent PD changes.Uwe Hermann
2018-08-11mdio: add test for "READ without ADDRESS" (bug #1258)Gerhard Sittig
2018-06-22Add a jtag_ejtag test-case.Uwe Hermann
2018-06-10mdio: Update files due to recent decoder change.Uwe Hermann
2018-06-10Add a CFP test-case.Uwe Hermann
2018-05-30counter: Update test results to reflect recent PD changes.Uwe Hermann
2018-05-26Add tests for atsha204aMichalis Pappas
2018-05-21eeprom24xx: add glasgow-firmware-flash test case.whitequark
2018-05-13st7735: Add basic ST7735 test-case.Aleksander Alekseev
2018-05-13rgb_led_ws281x: Add a WS2812B NeoPixel24 test-case.Uwe Hermann
2018-05-12mcs48: Add test for binary output (ROM data, address and data bytes)Gerhard Sittig
2018-05-12Add test for mcs48 decoderfenugrec
2018-05-03jtag_stm32: Update testcasesGeorge Hopkins
Due to bug #1066, the output of all DR/IR bits changed in the underlying JTAG decoder.
2018-05-03jtag: Fix shifting of registersGeorge Hopkins
As reported in bug #1066, the decoding of IR/DR bits was incorrect.
2018-05-03spiflash: Add an Adesto AT45DB161E test-case.Uwe Hermann
2018-04-24dcf77: adjust test expectation (PD emits more "invalid" annotations)Gerhard Sittig
The dcf77 decoder recently started emitting "invalid bit timing" and "Invalid DCF77 bit number" annotations, and does display bit positions of the 59th and subsequent pulse within a minute.
2018-04-12can: Update tests wrt the fix for bug #1085.Uwe Hermann
2018-04-08Add a few test-cases for rc_encode.Uwe Hermann
2018-03-07Add a few sda2506 test-cases.Uwe Hermann
2018-02-15ir_nec: add test for the optional carrier detect featureGerhard Sittig
The IR-NEC decoder optionally can handle input streams that still have the carrier signal. Add a test for this configuration, derived from the test which uses the signal that had the carrier removed in hardware. The same data is seen, just at different sample numbers. The content was verified by means of the "cut -d ' ' -f 2-" and "diff" commands.
2018-02-13graycode: add test for stream without sample rateGerhard Sittig
Use a smaller input stream which lacks a samplerate spec. This results in output that lacks the timing information (motion speed), but step count and direction are identical to the other existing test.
2018-02-11stepper_motor: add test for input stream without sample rateGerhard Sittig
The stepper motor decoder can still determine the steps' directions and count. Missing input sample rates just prevent the decoder from outputting speed annotations. All other decoder output is identical.
2018-02-11stepper_motor: lack of samplerate is not fatal any longerGerhard Sittig
2018-02-11i2s: add test for stream without sample rateGerhard Sittig
Use a smaller input stream which lacks a samplerate spec. This results in identical decoder output (the existing test did not cover throughput annotations).
2018-02-10i2s: lack of samplerate is not fatal any longerGerhard Sittig
2018-02-10i2c: add test for input stream without sample rate (identical decoder output)Gerhard Sittig
The existing test did not check the throughput annotation. Which is why the decoder output is identical for input streams with and without a sample rate specification.
2018-02-09i2c: lack of samplerate is not fatal any longerGerhard Sittig
2018-01-25ac97: introduce a basic test with the realtek alc655 snippetGerhard Sittig
2018-01-11counter: use HD44780 dump to check counter's reset_edge optionGerhard Sittig
Resetting counters depending on the LCD controller's R/S signal yields numbers that correspond to byte sequences that either "control" hardware (register access) or carry "data" (display text). Provide a test case for the rising edge of RESET. Existing cases already covered the falling edge of RESET which is the default.
2018-01-06counter: adjust test config for renamed 'data_edge' optionGerhard Sittig
2018-01-06parallel: use HD44780 dump to test parallel's word demux featureGerhard Sittig
2018-01-03Add some counter test-cases.Uwe Hermann
2018-01-01parallel: adjust hex number format of expected PD outputGerhard Sittig
The parallel decoder got adjusted to emit annotations for "items" and "words" in a unified format (consistent width, leading zeroes). Adjust the test expectation to match the PD implementation.
2018-01-01usb_power_delivery: fixup order of combined annotation text fragmentsGerhard Sittig
The USB power delivery decoder got adjusted to construct complex annotations that consisted of several text fragments in a reproducible order. Adjust the test expectation to match the PD implementation.
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-11-09 18:52:26 +0000