-------------------------------------------------------------------------------
RFID EM4100
-------------------------------------------------------------------------------

This is a signal taken from the read pin an RFID copier. A tag was placed
in front of the coil and the logic analyzer started sampling from within
PulseView.

The tag hex value is 0x0200F5ED8D.


Logic analyzer setup
--------------------

The logic analyzer used was a Saleae Logic16 clone (at 2MHz):

  Probe       RFID reader
  -----------------------
  1           RFID reader coil


Data
----

There is noise from the coil at the beginning and end. In the middle the tag
repeats its message.