------------------------------------------------------------------------------- Microchip 24LC64 ------------------------------------------------------------------------------- This is a set of example captures of Microchip 24LC64 I2C traffic. Details: https://www.microchip.com/wwwproducts/en/24LC64 http://ww1.microchip.com/downloads/en/DeviceDoc/21189T.pdf Logic analyzer setup -------------------- The logic analyzer used was a CWAV USBee SX or equivalent (at 8MHz): Probe I2C pin ------------------- 0 (black) SCL 1 (brown) SDA amfpga-cpld-board-fx2-init.sr ----------------------------- This is the I2C communication of a Microchip 24LC64 in an AMFPGA CPLD board. instrustar_isds250a_powerup.sr ------------------------------ This is the I2C communication during powerup between the Cypress FX2 and the Microchip 24LC64 in the Instrustar ISDS205A USB oscilloscope. instrustar_isds205x_powerup_scope.sr ------------------------------------ This is the I2C communication during powerup between the Cypress FX2 and the Microchip 24LC64 in the Instrustar ISDS205X USB oscilloscope (scope mode). sainsmart_dds120_powerup.sr --------------------------- This is the I2C communication during powerup between the Cypress FX2 and the Microchip 24LC64 in the SainSmart DDS120 USB oscilloscope. sainsmart_dds120_powerup_scl_analog.sr -------------------------------------- Same as sainsmart_dds120_powerup.sr, but recorded using an MSO (SCL/SDA digital and SCL analog). sainsmart_dds120_powerup_sda_analog.sr -------------------------------------- Same as sainsmart_dds120_powerup.sr, but recorded using an MSO (SCL/SDA digital and SDA analog). sainsmart_dds120_powerup_scl_sda_analog.sr ------------------------------------------ Same as sainsmart_dds120_powerup.sr, but recorded using an oscilloscope (SCL and SDA analog). sainsmart_dds140_powerup.sr --------------------------- This is the I2C communication during powerup between the Cypress FX2 and the Microchip 24LC64 in the SainSmart DDS140 USB oscilloscope. rocktech_bm102_powerup.sr ------------------------- This is the I2C communication during powerup between the Cypress FX2 and the Microchip 24LC64 in the Rocktech BM102 USB oscilloscope.