From 8f2d29186dc9f00888a3c9a76e15c1c57941efbe Mon Sep 17 00:00:00 2001
From: Uwe Hermann <uwe@hermann-uwe.de>
Date: Fri, 21 Jun 2013 09:19:50 +0200
Subject: Add example SPI dumps from an Atmel ATMEGA.

Thanks Clemens Novak <clemens@familie-novak.net> for the files.
---
 spi/spi_atmega32/README             |  69 ++++++++++++++++++++++++++++++++++++
 spi/spi_atmega32/spi_atmega32_00.sr | Bin 0 -> 20428 bytes
 spi/spi_atmega32/spi_atmega32_01.sr | Bin 0 -> 21811 bytes
 spi/spi_atmega32/spi_atmega32_10.sr | Bin 0 -> 20507 bytes
 spi/spi_atmega32/spi_atmega32_11.sr | Bin 0 -> 21926 bytes
 5 files changed, 69 insertions(+)
 create mode 100644 spi/spi_atmega32/README
 create mode 100644 spi/spi_atmega32/spi_atmega32_00.sr
 create mode 100644 spi/spi_atmega32/spi_atmega32_01.sr
 create mode 100644 spi/spi_atmega32/spi_atmega32_10.sr
 create mode 100644 spi/spi_atmega32/spi_atmega32_11.sr

(limited to 'spi')

diff --git a/spi/spi_atmega32/README b/spi/spi_atmega32/README
new file mode 100644
index 0000000..90e8780
--- /dev/null
+++ b/spi/spi_atmega32/README
@@ -0,0 +1,69 @@
+-------------------------------------------------------------------------------
+SPI / Atmel ATMEGA32
+-------------------------------------------------------------------------------
+
+This is a set of SPI captures from an Atmel ATMEGA32 device. The main loop of
+the C program outputs an 8-bit value which is increased by one between
+subsequent transmissions:
+
+  unsigned char c = 0;
+  for (;;) {
+  	_delay_us(250);
+  	cbi(PORTB, DD_SS);
+  	SPDR = c;
+  	c++;
+  	while (!(SPSR & (1 << SPIF)));
+  	sbi(PORTB, DD_SS);
+  }
+
+
+Logic analyzer setup
+--------------------
+
+The logic analyzer used was a Saleae Logic (at 500kHz).
+
+  Probe     ATMEGA32 pins (PDIP-40)
+  ---------------------------------
+  0 (CS)    SS/PB4 (Pin 5)
+  1 (MOSI)  MOSI/PB5 (Pin 6)
+  2 (SCK)   SCK/PB7 (Pin 8)
+
+
+Probing
+-------
+
+The sigrok command line used was:
+
+  sigrok-cli --driver fx2lafw --samples=1m --config samplerate=500k -o <file>
+
+
+SPI setup
+---------
+
+There are 4 different SPI setups each captured in a separate capture file
+(see the ATMEGA datasheet for the meaning of the CPOL & CPHA flags).
+
+
+spi_atmega32_00.sr
+------------------
+
+SPCR = (1<<SPE)|(1<<MSTR)|(1<<SPR0)|(1<<SPR1);
+
+
+spi_atmega32_11.sr
+------------------
+
+SPCR = (1<<SPE)|(1<<MSTR)|(1<<SPR0)|(1<<SPR1) | (1<<CPOL) | (1<<CPHA);
+
+
+spi_atmega32_01.sr
+------------------
+
+SPCR = (1<<SPE)|(1<<MSTR)|(1<<SPR0)|(1<<SPR1) | (1<<CPHA);
+
+
+spi_atmega32_10.sr
+------------------
+
+SPCR = (1<<SPE)|(1<<MSTR)|(1<<SPR0)|(1<<SPR1) | (1<<CPOL);
+
diff --git a/spi/spi_atmega32/spi_atmega32_00.sr b/spi/spi_atmega32/spi_atmega32_00.sr
new file mode 100644
index 0000000..f63dc91
Binary files /dev/null and b/spi/spi_atmega32/spi_atmega32_00.sr differ
diff --git a/spi/spi_atmega32/spi_atmega32_01.sr b/spi/spi_atmega32/spi_atmega32_01.sr
new file mode 100644
index 0000000..2ae0404
Binary files /dev/null and b/spi/spi_atmega32/spi_atmega32_01.sr differ
diff --git a/spi/spi_atmega32/spi_atmega32_10.sr b/spi/spi_atmega32/spi_atmega32_10.sr
new file mode 100644
index 0000000..aa5a9e8
Binary files /dev/null and b/spi/spi_atmega32/spi_atmega32_10.sr differ
diff --git a/spi/spi_atmega32/spi_atmega32_11.sr b/spi/spi_atmega32/spi_atmega32_11.sr
new file mode 100644
index 0000000..3e574db
Binary files /dev/null and b/spi/spi_atmega32/spi_atmega32_11.sr differ
-- 
cgit v1.2.3-54-g00ecf