From f68fd2bd1e18821bfb754c4235085752452f97aa Mon Sep 17 00:00:00 2001
From: King Kévin <kingkevin@cuvoodoo.info>
Date: Sun, 26 Mar 2017 19:25:40 +0200
Subject: add 1-Wire example using Dallas DS18B20 devices

---
 onewire/ds18b20/2xds18b20.sr | Bin 0 -> 5192 bytes
 onewire/ds18b20/README       |  63 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+)
 create mode 100644 onewire/ds18b20/2xds18b20.sr
 create mode 100644 onewire/ds18b20/README

(limited to 'onewire')

diff --git a/onewire/ds18b20/2xds18b20.sr b/onewire/ds18b20/2xds18b20.sr
new file mode 100644
index 0000000..1b71e93
Binary files /dev/null and b/onewire/ds18b20/2xds18b20.sr differ
diff --git a/onewire/ds18b20/README b/onewire/ds18b20/README
new file mode 100644
index 0000000..9246b32
--- /dev/null
+++ b/onewire/ds18b20/README
@@ -0,0 +1,63 @@
+-------------------------------------------------------------------------------
+Dallas DS18B20 1-Wire digital temperature sensor
+-------------------------------------------------------------------------------
+
+This is a set of example captures of the 1-Wire traffic from Maxim DS18B20
+temperature sensors.
+
+Details:
+https://en.wikipedia.org/wiki/1-Wire
+https://datasheets.maximintegrated.com/en/ds/DS18B20.pdf
+
+
+Logic analyzer setup
+--------------------
+
+The logic analyzer used was a MCU123 Saleae Logic clone (at 8 MHz):
+
+  Probe       DS18D20 pin
+  -----------------------
+  1 (brown)   2 (DQ)
+
+The sigrok command line used was:
+
+  sigrok-cli -d fx2lafw:samplerate=1mhz --samples 2m --channels 0 -o <file>
+
+
+2xds18b20.sr
+------------
+
+Two DS18D20 sensors are connected to the 1-Wire bus with following ROM codes:
+
+ - 0x8d011627f794ee28
+   (family code: 0x28, serial number: 0x011627f794ee, CRC: 0x8d)
+ - 0x330216255487ee28
+   (family code: 0x28, serial number: 0x0216255487ee, CRC: 0x33)
+
+The sensors have the same following marking:
+
+  Dallas
+  18B20
+  1619C4
+  +827AH
+
+The communication is initiated by a custom 1-Wire master software
+implementation for a STM32F103C8 using timers.
+
+The master performs the following actions:
+
+ - Use Search ROM command to enumerate all 1-Wire devices on the bus so to
+   count the number of DS10B20 sensors on the bus (two).
+ - Restart enumeration of each device using the Search ROM command so to store
+   their ROM code. After enumeration of each device:
+   - Use Match ROM command to select device.
+   - Use Read Scratchpad function command to read the 9 scratchpad bytes.
+   - Use Write Scratchpad function command to write 3 bytes, setting the
+     temperature conversion precision to 9 bits.
+   - Use the Copy Scratchpad function command to copy the scratchpad into
+     the device's internal EEPROM.
+ - Use Skip ROM command to address all devices.
+ - Use Convert T function command to start temperature conversion.
+ - After one second use Match ROM and Read Scratchpad commands on each device
+   to read the temperature stored in the scratchpad.
+ - After 1 second use Skip ROM and Convert T commands to start next conversion.
-- 
cgit v1.2.3-54-g00ecf