From 47cd3c8ff64cd43ddf47f5da497b88e30616b162 Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Thu, 19 Apr 2012 19:04:35 +0200 Subject: READMEs: Cosmetics, consistency fixes, typos. --- jtag/olimex_stm32-h103/README | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'jtag/olimex_stm32-h103/README') diff --git a/jtag/olimex_stm32-h103/README b/jtag/olimex_stm32-h103/README index 97b70fe..e9c2d0f 100644 --- a/jtag/olimex_stm32-h103/README +++ b/jtag/olimex_stm32-h103/README @@ -10,7 +10,8 @@ The JTAG adapter used was the FTDI FT2232H based Floss-JTAG (V0.2). The firmware flashed to the board is a simple LED-blinking libopencm3 example named 'fancyblink'. The respective fancyblink.bin file is available as a reference in the same directory as this README. -The file's MD5 sum is aa6980d55b9ced84fc0c64bfe9e5ff98. +The file's MD5 sum is aa6980d55b9ced84fc0c64bfe9e5ff98. The binary is licensed +under the GPL, version 3 or later (see URL below for the source code). Details: http://olimex.com/dev/stm32-h103.html @@ -22,7 +23,7 @@ http://libopencm3.git.sourceforge.net/git/gitweb.cgi?p=libopencm3/libopencm3;a=t Logic analyzer setup -------------------- -The logic analyzer used for capturing was a Saleae Logic: +The logic analyzer used was a Saleae Logic (at 4MHz): Probe STM32-H103 JTAG connector ------------------------------------- -- cgit v1.2.3-54-g00ecf