From 47cd3c8ff64cd43ddf47f5da497b88e30616b162 Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Thu, 19 Apr 2012 19:04:35 +0200 Subject: READMEs: Cosmetics, consistency fixes, typos. --- i2c/a2_dummy_write/README | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'i2c/a2_dummy_write') diff --git a/i2c/a2_dummy_write/README b/i2c/a2_dummy_write/README index 73e9b88..9bd37f7 100644 --- a/i2c/a2_dummy_write/README +++ b/i2c/a2_dummy_write/README @@ -3,15 +3,14 @@ Dummy I2C writes ------------------------------------------------------------------------------- This an example capture of some dummy I2C traffic, where the master writes -to a slave at address 0x51 (or 0x2a, if the read/write bit is included) -in an infinite loop. The slave does not respond. +to a slave (an RTC) at address 0x51 (or 0x2a, if the read/write bit is +included) in an infinite loop. The slave does not respond. Logic analyzer setup -------------------- -The logic analyzer used for capturing was a ChronoVu LA8 at a sample rate -of 1MHz. The logic analyzer probes were connected to the I2C pins like this: +The logic analyzer used was a ChronoVu LA8 (at 1MHz): Probe RTC chip pin ------------------------ -- cgit v1.2.3-70-g09d2