From 048863512d8088884b26248f9d026e1596923303 Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Thu, 24 Nov 2011 20:38:58 +0100 Subject: Rename a0_dummy_write/ to a2_dummy_write. --- i2c/a0_dummy_write/README | 36 ----------------------------------- i2c/a0_dummy_write/a2_dummy_write.sr | Bin 63965 -> 0 bytes 2 files changed, 36 deletions(-) delete mode 100644 i2c/a0_dummy_write/README delete mode 100644 i2c/a0_dummy_write/a2_dummy_write.sr (limited to 'i2c/a0_dummy_write') diff --git a/i2c/a0_dummy_write/README b/i2c/a0_dummy_write/README deleted file mode 100644 index d7fe4e7..0000000 --- a/i2c/a0_dummy_write/README +++ /dev/null @@ -1,36 +0,0 @@ -------------------------------------------------------------------------------- -Dummy I2C writes -------------------------------------------------------------------------------- - -This an example capture of some dummy I2C traffic, where the master writes -to a slave at address 0x51 (or 0x2a, if the read/write bit is included) -in an infinite loop. The slave does not respond. - - -Logic analyzer setup --------------------- - -The logic analyzer used for capturing was a ChronoVu LA8 at a sample rate -of 1MHz. The logic analyzer probes were connected to the I2C pins like this: - - Probe RTC chip pin - ------------------------ - 0 (green) SCL - 1 (orange) SDA - GND GND - - -Data ----- - -This is what the decoded data should look like: - - - S Wr:0xa2 A 0x55 A 0x66 A P - - - The abbreviations used above: S = Start, Wr = Write, A = ACK, P = Stop - -The sigrok command line used was: - - sigrok-cli -d 0:samplerate=1mhz --samples 8388608 \ - -p '1=SCL,2=SDA' -o a2_dummy_write.sr - diff --git a/i2c/a0_dummy_write/a2_dummy_write.sr b/i2c/a0_dummy_write/a2_dummy_write.sr deleted file mode 100644 index 1a11c73..0000000 Binary files a/i2c/a0_dummy_write/a2_dummy_write.sr and /dev/null differ -- cgit v1.2.3-70-g09d2