sigrok-dumps.git - sigrok-dumps

Age	Commit message (Collapse)	Author
2019-04-17	ROHM BH1750FVI: Added dumps for digital ambient light sensor.	Libor Gabaj

2019-04-17	sdcard_spi: Add a real sample of CMD24.	Uwe Hermann
	Pierre Poulain provided this file in bug #1365 as public domain.
2019-04-15	sdcard_spi: add CMD24 dumps (write single block)	Gerhard Sittig
	Pierre Poulain provided these files in bug #1365 as public domain.
2019-03-28	example dumps for CC1101	Marco

2019-03-28	onewire/ds2408: add dumps and README	Mariusz Bialonczyk

2019-03-28	flexray: add dumps for cold start and dynamic frames	stephan.thiele

2019-03-03	flexray: add dump and README	stephan.thiele

2019-03-02	can_fd/arbitrary_traffic/README: Minor capitalization fixes.	Uwe Hermann

2019-03-01	can_fd: add dumps with BRS + extended ids	Stephan Thiele

2019-02-12	rtc_dallas_ds1307: Add sigrok session file for demonstrating bugfixes.	Libor Gabaj
	- 12-hours mode - PM flag - 32768 Hz SQW
2019-02-12	can_fd: add dumps and README	Stephan Thiele

2019-01-20	hd44780: move HD44780 dump into the display/ subdirectory	Gerhard Sittig

2018-11-25	Add example dumps for the FSK decoder.	selabnayr

2018-11-10	Added dump for Xicor X2444M, nonvolatile static RAM.	Stefan Petersen

2018-10-21	uart: add dumps for LIN	coon

2018-10-21	winbond_w25q80d: Extract chip_erase_and_writes.sr snippets.	Uwe Hermann

2018-10-21	Add Winbond W25Q80DV captures	Vesa-Pekka Palmu

2018-10-14	Add sample HUB75 LED matrix capture	Vesa-Pekka Palmu
	This is a standard interface for most RGB LED matrix modules.
2018-10-14	adesto_at25sf041: Expand README a litte.	Uwe Hermann

2018-10-14	Adesto AT25SF041 serial flash captures	Vesa-Pekka Palmu
	Simple device ID checks, status register reads and data reads.
2018-10-12	trekstor_ebr30_a: README: Document I2C slave addresses.	Uwe Hermann

2018-09-25	Add a few Maxim MAX3420E SPI/USB captures.	Uwe Hermann

2018-09-09	modified miller encoding	Christoph Rackwitz
	baseband, hilbert transform and lowpass, thresholded .sr session
2018-09-09	Added HDMI-CEC protocol dumps	Jorge Solla

2018-09-09	usb_power_delivery: Add new captures	Peetz0r

2018-09-06	Samples for the decoder for STM8 series MCUs SWIM protocol.	Mike Jagdis
	Signed-off-by: Mike Jagdis <mjagdis@eris-associates.co.uk> (github: mjagdis)
2018-08-29	Add trace with Acer AL711 TFT behind DP-to-HDMI and HDMI-to-VGA adapters	Stefan Brüns
	The HDMI-to-VGA adapter provides audio via a 3.5mm socket. This feature is announced using a CEA extension block. The DP-to-HDMI adapter (Type 1) shows up at i2c address 0x40. It just provides an identification register/eeprom, reading 'DP-HDMI ADAPTOR\x04'.
2018-08-25	Truncate end of trace only showing the idle bus, correct swapped pin names	Stefan Brüns

2018-08-25	Truncate end of trace only showing the idle bus	Stefan Brüns

2018-08-11	mdio: add sample data for "read without address" (bug 1258)	Gerhard Sittig
	This recording is a trimmed down version of the file that was provided by "J Álvarez" who reported bug #1258. A READ command is sent while there is no previous ADDRESS command, which triggered an issue in the MDIO decoder.
2018-06-22	Add a MIPS EJTAG dump.	Uwe Hermann
	Provided by Vlad Ivanov <vlad@ivanov.email>, thanks!
2018-06-17	Add a few OOK dumps.	Steve R

2018-05-27	Add a few UART dumps with unitsize=4 for testing purposes.	Uwe Hermann

2018-05-26	Add dumps for the Microchip ATSHA204A crypto module	Michalis Pappas

2018-05-21	onsemi_cat24c256: Add a snippet file.	whitequark

2018-05-21	Add two ChronoVu LA8/LA16 dumps.	Uwe Hermann

2018-05-21	Add ON Semi CAT24C256 example dump.	whitequark

2018-05-13	st7735: Add a snippet file.	Uwe Hermann

2018-05-13	ws2812b_neopixel24: Add a WS2812B NeoPixel24 snippet file.	Uwe Hermann

2018-05-12	Add Intel MCS-48 example dump	fenugrec

2018-05-08	Add ST7735 dump.	Aleksander Alekseev

2018-05-03	Add an Adesto AT45DB161E dump.	Aleksander Alekseev

2018-04-08	Add two SSD1306 dumps.	Aleksander Alekseev

2018-04-05	Add some Maplin L95AR (PT2262 remote control encoder) files.	steversig

2018-03-07	Add nonstandard_eeproms/sda2506/* files.	Uwe Hermann
	This is a set of files provided by Max Weller. Original source: https://test.luelistan.net/sigrok/tests/
2018-02-13	i2c: manipulate recording to not specify a sample rate	Gerhard Sittig
	The I2C decoder recently got adjusted to cope with either the presence or absence of a sample rate spec. Create an example dump which lacks the sample rate. This was derived from the regular example by manipulating the srzip archive's meta data.
2018-02-13	graycode: create smaller recording without sample rate spec	Gerhard Sittig
	The graycode decoder can perfectly determine the direction and step count from input which lacks a sample rate spec, only speed cannot get determined. Create an example dump which lacks the samplerate spec.
2018-02-11	stepper_motor: manipulate recording to not specify a sample rate	Gerhard Sittig
	The stepper motor decoder recently got adjusted to cope with either the presence or absence of a sample rate spec. Create an example dump which lacks the sample rate. This was derived from the regular example by manipulating the srzip archive's meta data.
2018-02-11	i2s: create smaller recording without sample rate spec	Gerhard Sittig
	The I2S decoder recently got adjusted to cope with either the presence or absence of a sample rate spec. Create an example dump which lacks the sample rate specification.
2018-01-26	uart: Add some flow control (RTS#) examples.	Uwe Hermann
	The sender (incorrectly) transmits one or more excess bytes after RTS# has been pulled high by the receiver. This is not a problem in all cases (e.g. when the receiver UART hardware buffer is larger than one byte).