diff options
| -rw-r--r-- | can/can_fd/arbitrary_traffic/README | 58 |
1 files changed, 29 insertions, 29 deletions
diff --git a/can/can_fd/arbitrary_traffic/README b/can/can_fd/arbitrary_traffic/README index a4c5f9c..6b16668 100644 --- a/can/can_fd/arbitrary_traffic/README +++ b/can/can_fd/arbitrary_traffic/README @@ -13,7 +13,7 @@ Logic analyzer setup -------------------- The logic analyzer used was a Dreamsoucelab DSLogic Plus at a sample rate of -100Mhz. +100MHz. Channel 0 was hooked up to a PEAK-PCAN-USB Pro CAN-FD device which has two CAN ports. Both ports were connected together using a selfmade circuit board. @@ -30,17 +30,17 @@ port. All ACKs were handled by the participants. can_fd_std_without_brs_8.sr --------------------------- -This shows a single CAN-FD message with 8 Bytes of data without +This shows a single CAN-FD message with 8 bytes of data without Bitrate Switch (BRS). Nominal bitrate: 1M (CLK: 80MHz, BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%) Data bitrate: 2M (ignored, since BRS is disabled) -Extended frame: no -BRS: no -11898-1 ISO-mode: on +Extended frame: No +BRS: No +11898-1 ISO-mode: On ID: 0x42 Length: 8 bytes -Data is counting up from 0x00 to 0x07. +Data is counting up from 0x00 to 0x07 can_fd_without_brs_64.sr @@ -49,128 +49,128 @@ can_fd_without_brs_64.sr This shows a single CAN-FD message with 64 bytes of data without Bitrate Switch (BRS). -Host Clock: 80Mhz +Host Clock: 80MHz Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%) Data Bitrate: 2M (Ignored, since BRS is disabled) Extended Frame: No BRS: No 11898-1 ISO-Mode: On ID: 0x42 -Length: 8 Bytes +Length: 8 bytes Data is counting up from 0x00 to 0x07 can_fd_std_without_brs_64.sr ---------------------------- -This shows a single CAN-FD message with 64 Bytes of data without +This shows a single CAN-FD message with 64 bytes of data without Bitrate Switch (BRS). -Host Clock: 80Mhz +Host Clock: 80MHz Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%) Data Bitrate: 2M (Ignored, since BRS is disabled) Extended Frame: No BRS: No 11898-1 ISO-Mode: On ID: 0x42 -Length: 64 Bytes +Length: 64 bytes Data is counting up from 0x00 to 0x3F can_fd_ext_without_brs_8.sr --------------------------- -This shows a single CAN-FD message with 8 Bytes of data without +This shows a single CAN-FD message with 8 bytes of data without Bitrate Switch (BRS). -Host Clock: 80Mhz +Host Clock: 80MHz Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%) Data Bitrate: 2M (Ignored, since BRS is disabled) Extended Frame: Yes BRS: No 11898-1 ISO-Mode: On ID: 0x42 -Length: 8 Bytes +Length: 8 bytes Data is counting up from 0x00 to 0x07 can_fd_ext_without_brs_64.sr ---------------------------- -This shows a single CAN-FD message with 64 Bytes of data without +This shows a single CAN-FD message with 64 bytes of data without Bitrate Switch (BRS). -Host Clock: 80Mhz +Host Clock: 80MHz Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%) Data Bitrate: 2M (Ignored, since BRS is disabled) Extended Frame: Yes BRS: No 11898-1 ISO-Mode: On ID: 0x42 -Length: 64 Bytes +Length: 64 bytes Data is counting up from 0x00 to 0x3F can_fd_std_brs_8.sr ------------------- -This shows a single CAN-FD message with 64 Bytes of data with Bitrate Switch (BRS). +This shows a single CAN-FD message with 64 bytes of data with Bitrate Switch (BRS). -Host Clock: 80Mhz +Host Clock: 80MHz Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%) Data Bitrate: 2M (BRP: 4, TSeg1: 7, Tseg2: 2, Sjw: 1, SPP: 80%) Extended Frame: No BRS: Yes 11898-1 ISO-Mode: On ID: 0x42 -Length: 8 Bytes +Length: 8 bytes Data is counting up from 0x00 to 0x07 can_fd_std_brs_64.sr -------------------- -This shows a single CAN-FD message with 64 Bytes of data with Bitrate Switch (BRS). +This shows a single CAN-FD message with 64 bytes of data with Bitrate Switch (BRS). -Host Clock: 80Mhz +Host Clock: 80MHz Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%) Data Bitrate: 2M (BRP: 4, TSeg1: 7, Tseg2: 2, Sjw: 1, SPP: 80%) Extended Frame: No BRS: Yes 11898-1 ISO-Mode: On ID: 0x42 -Length: 64 Bytes +Length: 64 bytes Data is counting up from 0x00 to 0x3F can_fd_ext_brs_8.sr ------------------- -This shows a single CAN-FD message with 64 Bytes of data with Bitrate Switch (BRS). +This shows a single CAN-FD message with 64 bytes of data with Bitrate Switch (BRS). -Host Clock: 80Mhz +Host Clock: 80MHz Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%) Data Bitrate: 2M (BRP: 4, TSeg1: 7, Tseg2: 2, Sjw: 1, SPP: 80%) Extended Frame: Yes BRS: Yes 11898-1 ISO-Mode: On ID: 0x42 -Length: 8 Bytes +Length: 8 bytes Data is counting up from 0x00 to 0x07 can_fd_ext_brs_64.sr -------------------- -This shows a single CAN-FD message with 64 Bytes of data with Bitrate Switch (BRS). +This shows a single CAN-FD message with 64 bytes of data with Bitrate Switch (BRS). -Host Clock: 80Mhz +Host Clock: 80MHz Nominal Bitrate: 1M (BRP: 10, TSeg1: 5, Tseg2: 2, Sjw: 1, SPP: 75%) Data Bitrate: 2M (BRP: 4, TSeg1: 7, Tseg2: 2, Sjw: 1, SPP: 80%) Extended Frame: Yes BRS: Yes 11898-1 ISO-Mode: On ID: 0x42 -Length: 64 Bytes +Length: 64 bytes Data is counting up from 0x00 to 0x3F |