1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
|
##
## This file is part of the sigrok project.
##
## Copyright (C) 2012 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
# MEMSIC MXC6225XU protocol decoder
import sigrokdecode as srd
# ...
status = {
# SH[1:0]
'sh': {
0b00: 'no shake event',
0b01: 'shake left',
0b10: 'shake right',
0b11: 'undefined',
},
# ORI[1:0] and OR[1:0] (same format)
'ori': {
0b00: 'vertical in upright orientation',
0b01: 'rotated 90 degrees clockwise',
0b10: 'vertical in inverted orientation',
0b11: 'rotated 90 degrees counterclockwise',
},
}
class Decoder(srd.Decoder):
api_version = 1
id = 'mxc6225xu'
name = 'MXC6225XU'
longname = 'MEMSIC MXC6225XU'
desc = 'Digital Thermal Orientation Sensor (DTOS) protocol'
license = 'gplv2+'
inputs = ['i2c']
outputs = ['mxc6225xu']
probes = []
optional_probes = [
{'id': 'int', 'name': 'INT', 'desc': 'DTOS interrupt output pin'},
]
options = {}
annotations = [
['TODO', 'TODO'],
]
def __init__(self, **kwargs):
self.state = 'IDLE'
def start(self, metadata):
# self.out_proto = self.add(srd.OUTPUT_PROTO, 'mxc6225xu')
self.out_ann = self.add(srd.OUTPUT_ANN, 'mxc6225xu')
def report(self):
pass
def putx(self, data):
self.put(self.ss, self.es, self.out_ann, data)
def handle_reg_0x00(self, b):
# XOUT: 8-bit x-axis acceleration output.
# Data is in 2's complement, values range from -128 to 127.
self.putx([0, ['XOUT: ' + str(b)]])
def handle_reg_0x01(self, b):
# YOUT: 8-bit y-axis acceleration output.
# Data is in 2's complement, values range from -128 to 127.
self.putx([0, ['YOUT: ' + str(b)]])
def handle_reg_0x02(self, b):
# STATUS: Orientation and shake status.
# Bits [7:7]: INT
int_val = (b >> 7) & 1
s = 'unchanged and no' if (int_val == 0) else 'changed or'
ann = 'INT = %d: Orientation %s shake event occured\n' % (int_val, s)
# Bits[6:5]: SH[1:0]
sh = (((b >> 6) & 1) << 1) | ((b >> 5) & 1)
ann += 'SH[1:0] = %s: %s\n' % (bin(sh)[2:], status['sh'][sh])
# Bits[4:4]: TILT
tilt = (b >> 7) & 1
s = '' if (tilt == 0) else 'not '
ann += 'TILT = %d: Orientation measurement is %svalid\n' % (tilt, s)
# Bits[3:2]: ORI[1:0]
ori = (((b >> 3) & 1) << 1) | ((b >> 2) & 1)
ann += 'ORI[1:0] = %s: %s\n' % (bin(ori)[2:], status['ori'][ori])
# Bits[1:0]: OR[1:0]
or_val = (((b >> 1) & 1) << 1) | ((b >> 0) & 1)
ann += 'OR[1:0] = %s: %s\n' % (bin(or_val)[2:], status['ori'][or_val])
# ann += 'b = %s\n' % (bin(b))
self.putx([0, [ann]])
def handle_reg_0x03(self, b):
# DETECTION: Powerdown, orientation and shake detection parameters.
# Note: This is a write-only register.
# Bits [7:7]: PD
pd = (b >> 7) & 1
s = 'Do not power down' if (int_val == 0) else 'Power down'
ann = 'PD = %d: %s the device\n' % (pd, s)
# Bits [6:6]: SHM
shm = (b >> 6) & 1
s = 'TODO' if (shm == 0) else 'TODO'
ann = 'SHM = %d: %s\n' % (pd, s)
# TODO
# self.putx([0, ['TODO: DETECTION']])
# TODO: Fixup, this is copy-pasted from another PD.
def decode(self, ss, es, data):
cmd, databyte = data
# Store the start/end samples of this I2C packet.
self.ss, self.es = ss, es
# State machine.
if self.state == 'IDLE':
# Wait for an I2C START condition.
if cmd != 'START':
return
self.state = 'GET SLAVE ADDR'
self.block_start_sample = ss
elif self.state == 'GET SLAVE ADDR':
# Wait for an address write operation.
# TODO: We should only handle packets to the slave (0x2a/TODO).
if cmd != 'ADDRESS WRITE':
return
self.state = 'GET REG ADDR'
elif self.state == 'GET REG ADDR':
# Wait for a data write (master selects the slave register).
if cmd != 'DATA WRITE':
return
self.reg = databyte
self.state = 'WRITE RTC REGS'
elif self.state == 'WRITE RTC REGS':
# If we see a Repeated Start here, it's probably an RTC read.
if cmd == 'START REPEAT':
self.state = 'READ RTC REGS'
return
# Otherwise: Get data bytes until a STOP condition occurs.
if cmd == 'DATA WRITE':
handle_reg = getattr(self, 'handle_reg_0x%02x' % self.reg)
handle_reg(databyte)
self.reg += 1
# TODO: Check for NACK!
elif cmd == 'STOP':
# TODO
self.state = 'IDLE'
else:
pass # TODO
elif self.state == 'READ RTC REGS':
# Wait for an address read operation.
# TODO: We should only handle packets to the RTC slave (0xa2/0xa3).
if cmd == 'ADDRESS READ':
self.state = 'READ RTC REGS2'
return
else:
pass # TODO
elif self.state == 'READ RTC REGS2':
if cmd == 'DATA READ':
handle_reg = getattr(self, 'handle_reg_0x%02x' % self.reg)
handle_reg(databyte)
self.reg += 1
# TODO: Check for NACK!
elif cmd == 'STOP':
# TODO
self.state = 'IDLE'
else:
pass # TODO?
else:
raise Exception('Invalid state: %d' % self.state)
|
