/*---------------------------------------------------------------------------------------------------------------------------------------------------
* irmpprotocols.h - irmp protocols
*
* DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H or IRSND.H!
*
* Copyright (c) 2013-2019 Frank Meyer - frank(at)fli4l.de
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef _IRMP_PROTOCOLS_H_
#define _IRMP_PROTOCOLS_H_
#if !defined(_IRMP_H_) && !defined(_IRSND_H_)
# error please include only irmp.h or irsnd.h, not irmpprotocols.h
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* IR protocols:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define IRMP_UNKNOWN_PROTOCOL 0 // uknown protocol
#define IRMP_SIRCS_PROTOCOL 1 // Sony
#define IRMP_NEC_PROTOCOL 2 // NEC, Pioneer, JVC, Toshiba, NoName etc.
#define IRMP_SAMSUNG_PROTOCOL 3 // Samsung
#define IRMP_MATSUSHITA_PROTOCOL 4 // Matsushita
#define IRMP_KASEIKYO_PROTOCOL 5 // Kaseikyo (Panasonic etc)
#define IRMP_RECS80_PROTOCOL 6 // Philips, Thomson, Nordmende, Telefunken, Saba
#define IRMP_RC5_PROTOCOL 7 // Philips etc
#define IRMP_DENON_PROTOCOL 8 // Denon, Sharp
#define IRMP_RC6_PROTOCOL 9 // Philips etc
#define IRMP_SAMSUNG32_PROTOCOL 10 // Samsung32: no sync pulse at bit 16, length 32 instead of 37
#define IRMP_APPLE_PROTOCOL 11 // Apple, very similar to NEC
#define IRMP_RECS80EXT_PROTOCOL 12 // Philips, Technisat, Thomson, Nordmende, Telefunken, Saba
#define IRMP_NUBERT_PROTOCOL 13 // Nubert
#define IRMP_BANG_OLUFSEN_PROTOCOL 14 // Bang & Olufsen
#define IRMP_GRUNDIG_PROTOCOL 15 // Grundig
#define IRMP_NOKIA_PROTOCOL 16 // Nokia
#define IRMP_SIEMENS_PROTOCOL 17 // Siemens, e.g. Gigaset
#define IRMP_FDC_PROTOCOL 18 // FDC keyboard
#define IRMP_RCCAR_PROTOCOL 19 // RC Car
#define IRMP_JVC_PROTOCOL 20 // JVC (NEC with 16 bits)
#define IRMP_RC6A_PROTOCOL 21 // RC6A, e.g. Kathrein, XBOX
#define IRMP_NIKON_PROTOCOL 22 // Nikon
#define IRMP_RUWIDO_PROTOCOL 23 // Ruwido, e.g. T-Home Mediareceiver
#define IRMP_IR60_PROTOCOL 24 // IR60 (SDA2008)
#define IRMP_KATHREIN_PROTOCOL 25 // Kathrein
#define IRMP_NETBOX_PROTOCOL 26 // Netbox keyboard (bitserial)
#define IRMP_NEC16_PROTOCOL 27 // NEC with 16 bits (incl. sync)
#define IRMP_NEC42_PROTOCOL 28 // NEC with 42 bits
#define IRMP_LEGO_PROTOCOL 29 // LEGO Power Functions RC
#define IRMP_THOMSON_PROTOCOL 30 // Thomson
#define IRMP_BOSE_PROTOCOL 31 // BOSE
#define IRMP_A1TVBOX_PROTOCOL 32 // A1 TV Box
#define IRMP_ORTEK_PROTOCOL 33 // ORTEK - Hama
#define IRMP_TELEFUNKEN_PROTOCOL 34 // Telefunken (1560)
#define IRMP_ROOMBA_PROTOCOL 35 // iRobot Roomba vacuum cleaner
#define IRMP_RCMM32_PROTOCOL 36 // Fujitsu-Siemens (Activy remote control)
#define IRMP_RCMM24_PROTOCOL 37 // Fujitsu-Siemens (Activy keyboard)
#define IRMP_RCMM12_PROTOCOL 38 // Fujitsu-Siemens (Activy keyboard)
#define IRMP_SPEAKER_PROTOCOL 39 // Another loudspeaker protocol, similar to Nubert
#define IRMP_LGAIR_PROTOCOL 40 // LG air conditioner
#define IRMP_SAMSUNG48_PROTOCOL 41 // air conditioner with SAMSUNG protocol (48 bits)
#define IRMP_MERLIN_PROTOCOL 42 // Merlin (Pollin 620 185)
#define IRMP_PENTAX_PROTOCOL 43 // Pentax camera
#define IRMP_FAN_PROTOCOL 44 // FAN (ventilator), very similar to NUBERT, but last bit is data bit instead of stop bit
#define IRMP_S100_PROTOCOL 45 // very similar to RC5, but 14 instead of 13 data bits
#define IRMP_ACP24_PROTOCOL 46 // Stiebel Eltron ACP24 air conditioner
#define IRMP_TECHNICS_PROTOCOL 47 // Technics, similar to Matsushita, but 22 instead of 24 bits
#define IRMP_PANASONIC_PROTOCOL 48 // Panasonic (Beamer), start bits similar to KASEIKYO
#define IRMP_MITSU_HEAVY_PROTOCOL 49 // Mitsubishi-Heavy Aircondition, similar timing as Panasonic beamer
#define IRMP_VINCENT_PROTOCOL 50 // Vincent
#define IRMP_SAMSUNGAH_PROTOCOL 51 // SAMSUNG AH
#define IRMP_IRMP16_PROTOCOL 52 // IRMP specific protocol for data transfer, e.g. between two microcontrollers via IR
#define IRMP_GREE_PROTOCOL 53 // Gree climate
#define IRMP_RCII_PROTOCOL 54 // RC II Infra Red Remote Control Protocol for FM8
#define IRMP_METZ_PROTOCOL 55 // METZ
#define IRMP_ONKYO_PROTOCOL 56
#define IRMP_RADIO1_PROTOCOL 57 // Radio protocol (experimental status), do not use it yet!
#define IRMP_N_PROTOCOLS 57 // number of supported protocols
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* timing constants:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
// fm 22.09.2011: may not be more than 16000L, otherwise some JVC codes will not be accepted
#define IRMP_TIMEOUT_TIME 15500.0e-6 // timeout after 15.5 ms darkness
#define IRMP_TIMEOUT_TIME_MS 15500L // timeout after 15.5 ms darkness
#if IRMP_SUPPORT_NIKON_PROTOCOL == 1
# define IRMP_TIMEOUT_NIKON_TIME 29500.0e-6 // 2nd timeout after 29.5 ms darkness (only for NIKON!)
# define IRMP_TIMEOUT_NIKON_TIME_MS 29500L // 2nd timeout after 29.5 ms darkness
typedef uint16_t PAUSE_LEN;
# define IRMP_TIMEOUT_NIKON_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_NIKON_TIME + 0.5)
#else
# if (F_INTERRUPTS * IRMP_TIMEOUT_TIME_MS) / 1000000 >= 254
typedef uint16_t PAUSE_LEN;
# else
typedef uint8_t PAUSE_LEN;
# endif
#endif
#define IRMP_TIMEOUT_LEN (PAUSE_LEN)(F_INTERRUPTS * IRMP_TIMEOUT_TIME + 0.5)
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* flags of struct IRMP_PARAMETER:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define IRMP_PARAM_FLAG_IS_MANCHESTER 0x01
#define IRMP_PARAM_FLAG_1ST_PULSE_IS_1 0x02
#define IRMP_PARAM_FLAG_IS_SERIAL 0x04
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* SIRCS:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define SIRCS_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse
#define SIRCS_START_BIT_PAUSE_TIME 600.0e-6 // 600 usec pause
#define SIRCS_1_PULSE_TIME 1200.0e-6 // 1200 usec pulse
#define SIRCS_0_PULSE_TIME 600.0e-6 // 600 usec pulse
#define SIRCS_PAUSE_TIME 600.0e-6 // 600 usec pause
#define SIRCS_FRAMES 3 // SIRCS sends each frame 3 times
#define SIRCS_AUTO_REPETITION_PAUSE_TIME 25.0e-3 // auto repetition after 25ms
#define SIRCS_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
#define SIRCS_ADDRESS_OFFSET 15 // skip 15 bits
#define SIRCS_ADDRESS_LEN 5 // read up to 5 address bits
#define SIRCS_COMMAND_OFFSET 0 // skip 0 bits
#define SIRCS_COMMAND_LEN 15 // read 12-15 command bits
#define SIRCS_MINIMUM_DATA_LEN 12 // minimum data length
#define SIRCS_COMPLETE_DATA_LEN 20 // complete length - may be up to 20
#define SIRCS_STOP_BIT 0 // has no stop bit
#define SIRCS_LSB 1 // LSB...MSB
#define SIRCS_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* NEC & NEC42 & NEC16 & LGAIR:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define NEC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse
#define NEC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
#define NEC_REPEAT_START_BIT_PAUSE_TIME 2250.0e-6 // 2250 usec pause
#define NEC_PULSE_TIME 560.0e-6 // 560 usec pulse
#define NEC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause
#define NEC_0_PAUSE_TIME 560.0e-6 // 560 usec pause
#define NEC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
#define NEC_ADDRESS_OFFSET 0 // skip 0 bits
#define NEC_ADDRESS_LEN 16 // read 16 address bits
#define NEC_COMMAND_OFFSET 16 // skip 16 bits (8 address + 8 /address)
#define NEC_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command)
#define NEC_COMPLETE_DATA_LEN 32 // complete length
#define NEC_STOP_BIT 1 // has stop bit
#define NEC_LSB 1 // LSB...MSB
#define NEC_FLAGS 0 // flags
#define NEC42_ADDRESS_OFFSET 0 // skip 0 bits
#define NEC42_ADDRESS_LEN 13 // read 13 address bits
#define NEC42_COMMAND_OFFSET 26 // skip 26 bits (2 x 13 address bits)
#define NEC42_COMMAND_LEN 8 // read 8 command bits
#define NEC42_COMPLETE_DATA_LEN 42 // complete length (2 x 13 + 2 x 8)
#define LGAIR_ADDRESS_OFFSET 0 // skip 0 bits
#define LGAIR_ADDRESS_LEN 8 // read 8 address bits
#define LGAIR_COMMAND_OFFSET 8 // skip 8 bits (8 address)
#define LGAIR_COMMAND_LEN 16 // read 16 bits (16 command)
#define LGAIR_COMPLETE_DATA_LEN 28 // complete length (8 address + 16 command + 4 checksum)
#define NEC16_ADDRESS_OFFSET 0 // skip 0 bits
#define NEC16_ADDRESS_LEN 8 // read 8 address bits
#define NEC16_COMMAND_OFFSET 8 // skip 8 bits (8 address)
#define NEC16_COMMAND_LEN 8 // read 8 bits (8 command)
#define NEC16_COMPLETE_DATA_LEN 16 // complete length
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* SAMSUNG & SAMSUNG32 & SAMSUNG48:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define SAMSUNG_START_BIT_PULSE_TIME 4500.0e-6 // 4500 usec pulse
#define SAMSUNG_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
#define SAMSUNG_PULSE_TIME 550.0e-6 // 550 usec pulse
#define SAMSUNG_1_PAUSE_TIME 1500.0e-6 // 1550 usec pause
#define SAMSUNG_0_PAUSE_TIME 500.0e-6 // 500 usec pause
#define SAMSUNG_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
#define SAMSUNG_ADDRESS_OFFSET 0 // skip 0 bits
#define SAMSUNG_ADDRESS_LEN 16 // read 16 address bits
#define SAMSUNG_ID_OFFSET 17 // skip 16 + 1 sync bit
#define SAMSUNG_ID_LEN 4 // read 4 id bits
#define SAMSUNG_COMMAND_OFFSET 21 // skip 16 + 1 sync + 4 data bits
#define SAMSUNG_COMMAND_LEN 16 // read 16 command bits
#define SAMSUNG_COMPLETE_DATA_LEN 37 // complete length
#define SAMSUNG_STOP_BIT 1 // has stop bit
#define SAMSUNG_LSB 1 // LSB...MSB?
#define SAMSUNG_FLAGS 0 // flags
#define SAMSUNG32_COMMAND_OFFSET 16 // skip 16 bits
#define SAMSUNG32_COMMAND_LEN 16 // read 16 command bits
#define SAMSUNG32_COMPLETE_DATA_LEN 32 // complete length
#define SAMSUNG32_FRAMES 1 // SAMSUNG32 sends one frame
#define SAMSUNG32_AUTO_REPETITION_PAUSE_TIME 47.0e-3 // repetition after 47 ms
#define SAMSUNG32_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 47ms
#define SAMSUNG48_COMMAND_OFFSET 16 // skip 16 bits
#define SAMSUNG48_COMMAND_LEN 32 // read 32 command bits
#define SAMSUNG48_COMPLETE_DATA_LEN 48 // complete length
#define SAMSUNG48_FRAMES 2 // SAMSUNG48 sends each frame 2 times
#define SAMSUNG48_AUTO_REPETITION_PAUSE_TIME 5.0e-3 // repetition after 5 ms
#define SAMSUNG48_FRAME_REPEAT_PAUSE_TIME 47.0e-3 // frame repeat after 47ms
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* SAMSUNGAH:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define SAMSUNGAH_START_BIT_PULSE_TIME 2500.0e-6 // 2500 usec pulse
#define SAMSUNGAH_START_BIT_PAUSE_TIME 1900.0e-6 // 1900 usec pause
#define SAMSUNGAH_PULSE_TIME 450.0e-6 // 450 usec pulse
#define SAMSUNGAH_1_PAUSE_TIME 1100.0e-6 // 1100 usec pause
#define SAMSUNGAH_0_PAUSE_TIME 450.0e-6 // 450 usec pause
#define SAMSUNGAH_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
#define SAMSUNGAH_ADDRESS_OFFSET 0 // skip 0 bits
#define SAMSUNGAH_ADDRESS_LEN 16 // read 16 address bits, ignore 17..31
#define SAMSUNGAH_COMMAND_OFFSET 32 // skip 32 bits
#define SAMSUNGAH_COMMAND_LEN 16 // read 32 bits
#define SAMSUNGAH_COMPLETE_DATA_LEN 48 // complete length
#define SAMSUNGAH_STOP_BIT 1 // has stop bit
#define SAMSUNGAH_LSB 1 // LSB...MSB?
#define SAMSUNGAH_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* MATSUSHITA:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define MATSUSHITA_START_BIT_PULSE_TIME 3488.0e-6 // 3488 usec pulse
#define MATSUSHITA_START_BIT_PAUSE_TIME 3488.0e-6 // 3488 usec pause
#define MATSUSHITA_PULSE_TIME 872.0e-6 // 872 usec pulse
#define MATSUSHITA_1_PAUSE_TIME 2616.0e-6 // 2616 usec pause
#define MATSUSHITA_0_PAUSE_TIME 872.0e-6 // 872 usec pause
#define MATSUSHITA_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
#define MATSUSHITA_ADDRESS_OFFSET 12 // skip 12 bits
#define MATSUSHITA_ADDRESS_LEN 12 // read 12 address bits
#define MATSUSHITA_COMMAND_OFFSET 0 // skip 0 bits
#define MATSUSHITA_COMMAND_LEN 12 // read 12 bits (6 custom + 6 command)
#define MATSUSHITA_COMPLETE_DATA_LEN 24 // complete length
#define MATSUSHITA_STOP_BIT 1 // has stop bit
#define MATSUSHITA_LSB 1 // LSB...MSB?
#define MATSUSHITA_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* TECHNICS: same timings as MATSUSHITA
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define TECHNICS_ADDRESS_LEN 0 // read 0 address bits
#define TECHNICS_COMMAND_LEN 11 // read 11 bits
#define TECHNICS_COMPLETE_DATA_LEN 22 // complete length
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* KASEIKYO:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define KASEIKYO_START_BIT_PULSE_TIME 3380.0e-6 // 3380 usec pulse
#define KASEIKYO_START_BIT_PAUSE_TIME 1690.0e-6 // 1690 usec pause
#define KASEIKYO_PULSE_TIME 423.0e-6 // 525 usec pulse
#define KASEIKYO_1_PAUSE_TIME 1269.0e-6 // 525 usec pause
#define KASEIKYO_0_PAUSE_TIME 423.0e-6 // 1690 usec pause
#define KASEIKYO_AUTO_REPETITION_PAUSE_TIME 74.0e-3 // repetition after 74 ms
#define KASEIKYO_FRAME_REPEAT_PAUSE_TIME 74.0e-3 // frame repeat after 74 ms
#define KASEIKYO_ADDRESS_OFFSET 0 // skip 0 bits
#define KASEIKYO_ADDRESS_LEN 16 // read 16 address bits
#define KASEIKYO_COMMAND_OFFSET 28 // skip 28 bits (16 manufacturer & 4 parity & 8 genre)
#define KASEIKYO_COMMAND_LEN 12 // read 12 command bits (10 real command & 2 id)
#define KASEIKYO_COMPLETE_DATA_LEN 48 // complete length
#define KASEIKYO_STOP_BIT 1 // has stop bit
#define KASEIKYO_LSB 1 // LSB...MSB?
#define KASEIKYO_FRAMES 1 // KASEIKYO sends 1 frame
#define KASEIKYO_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* PANASONIC (Beamer), start bit timings similar to KASEIKYO
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define PANASONIC_START_BIT_PULSE_TIME 3600.0e-6 // 3600 usec pulse
#define PANASONIC_START_BIT_PAUSE_TIME 1600.0e-6 // 1690 usec pause
#define PANASONIC_PULSE_TIME 565.0e-6 // 565 usec pulse
#define PANASONIC_1_PAUSE_TIME 1140.0e-6 // 1140 usec pause
#define PANASONIC_0_PAUSE_TIME 316.0e-6 // 316 usec pause
#define PANASONIC_AUTO_REPETITION_PAUSE_TIME 40.0e-3 // repetition after 40 ms?
#define PANASONIC_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40 ms
#define PANASONIC_ADDRESS_OFFSET 24 // skip 24 bits: 010000000000010000000001
#define PANASONIC_ADDRESS_LEN 16 // read 16 address bits
#define PANASONIC_COMMAND_OFFSET 40 // skip 40 bits
#define PANASONIC_COMMAND_LEN 16 // read 16 command bits
#define PANASONIC_COMPLETE_DATA_LEN 56 // complete length
#define PANASONIC_STOP_BIT 1 // has stop bit
#define PANASONIC_LSB 1 // LSB...MSB?
#define PANASONIC_FRAMES 1 // PANASONIC sends 1 frame
#define PANASONIC_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* MITSUBISHI-Heavy Aircondition, timings similar to PANASONIC beamer
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define MITSU_HEAVY_START_BIT_PULSE_TIME 3200.0e-6 // 3600 usec pulse
#define MITSU_HEAVY_START_BIT_PAUSE_TIME 1560.0e-6 // 1690 usec pause
#define MITSU_HEAVY_PULSE_TIME 400.0e-6 // 565 usec pulse
#define MITSU_HEAVY_1_PAUSE_TIME 1200.0e-6 // 1140 usec pause
#define MITSU_HEAVY_0_PAUSE_TIME 430.0e-6 // 316 usec pause
#define MITSU_HEAVY_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40 ms
#define MITSU_HEAVY_ADDRESS_OFFSET 40 // skip 24 bits: 010000000000010000000001
#define MITSU_HEAVY_ADDRESS_LEN 16 // read 16 address bits
#define MITSU_HEAVY_COMMAND_OFFSET 56 // skip 40 bits
#define MITSU_HEAVY_COMMAND_LEN 16 // read 16 command bits
#define MITSU_HEAVY_COMPLETE_DATA_LEN 88 // complete length
#define MITSU_HEAVY_STOP_BIT 1 // has stop bit
#define MITSU_HEAVY_LSB 0 // LSB...MSB?
#define MITSU_HEAVY_FRAMES 1 // PANASONIC sends 1 frame
#define MITSU_HEAVY_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* VINCENT
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define VINCENT_START_BIT_PULSE_TIME 2500.0e-6 // 2500 usec pulse
#define VINCENT_START_BIT_PAUSE_TIME 4600.0e-6 // 4600 usec pause
#define VINCENT_PULSE_TIME 550.0e-6 // 550 usec pulse
#define VINCENT_1_PAUSE_TIME 1540.0e-6 // 1540 usec pause
#define VINCENT_0_PAUSE_TIME 550.0e-6 // 550 usec pause
#define VINCENT_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40 ms ?
#define VINCENT_ADDRESS_OFFSET 0 // skip 0 bits
#define VINCENT_ADDRESS_LEN 16 // read 16 address bits
#define VINCENT_COMMAND_OFFSET 16 // skip 16 bits
#define VINCENT_COMMAND_LEN 16 // read 16 command bits
#define VINCENT_COMPLETE_DATA_LEN 32 // complete length
#define VINCENT_STOP_BIT 1 // has stop bit
#define VINCENT_LSB 0 // LSB...MSB?
#define VINCENT_FRAMES 1 // VINCENT sends 1 frame
#define VINCENT_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* RECS80:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define RECS80_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse
#define RECS80_START_BIT_PAUSE_TIME 7432.0e-6 // 7432 usec pause
#define RECS80_PULSE_TIME 158.0e-6 // 158 usec pulse
#define RECS80_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause
#define RECS80_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause
#define RECS80_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
#define RECS80_ADDRESS_OFFSET 1 // skip 1 bit (toggle bit)
#define RECS80_ADDRESS_LEN 3 // read 3 address bits
#define RECS80_COMMAND_OFFSET 4 // skip 4 bits (1 toggle + 3 address)
#define RECS80_COMMAND_LEN 6 // read 6 command bits
#define RECS80_COMPLETE_DATA_LEN 10 // complete length
#define RECS80_STOP_BIT 1 // has stop bit
#define RECS80_LSB 0 // MSB...LSB
#define RECS80_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* RC5:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define RC5_BIT_TIME 889.0e-6 // 889 usec pulse/pause
#define RC5_FRAME_REPEAT_PAUSE_TIME 88.9e-3 // frame repeat after 88.9ms
#define RC5_ADDRESS_OFFSET 1 // skip 1 bit (2nd start)
#define RC5_ADDRESS_LEN 6 // read 1 toggle bit (for key repetition detection) + 5 address bits
#define RC5_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)
#define RC5_COMMAND_LEN 6 // read 6 command bits
#define RC5_COMPLETE_DATA_LEN 13 // complete length
#define RC5_STOP_BIT 0 // has no stop bit
#define RC5_LSB 0 // MSB...LSB
#define RC5_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* RCII:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define RCII_START_BIT_PULSE_TIME 512.0e-6 // 512 usec pulse
#define RCII_START_BIT_PAUSE_TIME 2560.0e-6 // 2560 usec pause
#define RCII_START_BIT2_PULSE_TIME 1024.0e-6 // 1024 usec pulse
#define RCII_BIT_TIME 512.0e-6 // 512 usec pulse/pause
#define RCII_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // frame repeat after 117.76ms
#define RCII_ADDRESS_OFFSET 0 // skip 1 bit (2nd start)
#define RCII_ADDRESS_LEN 0 // no address
#define RCII_COMMAND_OFFSET 0 // command offset is 0
#define RCII_COMMAND_LEN 10 // read 1 + 9 command bits
#define RCII_COMPLETE_DATA_LEN 10 // complete length
#define RCII_STOP_BIT 0 // has no stop bit
#define RCII_LSB 0 // MSB...LSB
#define RCII_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* S100: very similar to RC5, but 14 insted of 13 bits
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define S100_BIT_TIME 889.0e-6 // 889 usec pulse/pause
#define S100_FRAME_REPEAT_PAUSE_TIME 88.9e-3 // frame repeat after 88.9ms
#define S100_ADDRESS_OFFSET 1 // skip 1 bit (2nd start)
#define S100_ADDRESS_LEN 6 // read 1 toggle bit (for key repetition detection) + 5 address bits
#define S100_COMMAND_OFFSET 7 // skip 5 bits (2nd start + 1 toggle + 5 address)
#define S100_COMMAND_LEN 7 // read 7 command bits
#define S100_COMPLETE_DATA_LEN 14 // complete length
#define S100_STOP_BIT 0 // has no stop bit
#define S100_LSB 0 // MSB...LSB
#define S100_FLAGS IRMP_PARAM_FLAG_IS_MANCHESTER // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* DENON:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define DENON_PULSE_TIME 310.0e-6 // 310 usec pulse in practice, 275 in theory
#define DENON_1_PAUSE_TIME 1780.0e-6 // 1780 usec pause in practice, 1900 in theory
#define DENON_0_PAUSE_TIME 745.0e-6 // 745 usec pause in practice, 775 in theory
#define DENON_FRAMES 2 // DENON sends each frame 2 times
#define DENON_AUTO_REPETITION_PAUSE_TIME 45.0e-3 // inverted repetition after 45ms
#define DENON_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
#define DENON_ADDRESS_OFFSET 0 // skip 0 bits
#define DENON_ADDRESS_LEN 5 // read 5 address bits
#define DENON_COMMAND_OFFSET 5 // skip 5
#define DENON_COMMAND_LEN 10 // read 10 command bits
#define DENON_COMPLETE_DATA_LEN 15 // complete length
#define DENON_STOP_BIT 1 // has stop bit
#define DENON_LSB 0 // MSB...LSB
#define DENON_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* RC6:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define RC6_START_BIT_PULSE_TIME 2666.0e-6 // 2.666 msec pulse
#define RC6_START_BIT_PAUSE_TIME 889.0e-6 // 889 usec pause
#define RC6_TOGGLE_BIT_TIME 889.0e-6 // 889 msec pulse/pause
#define RC6_BIT_TIME 444.0e-6 // 444 usec pulse/pause
#define RC6_BIT_2_TIME 889.0e-6 // 889 usec pulse/pause
#define RC6_BIT_3_TIME 1333.0e-6 // 1333 usec pulse/pause
#define RC6_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
#define RC6_ADDRESS_OFFSET 5 // skip "1" + 3 mode bits + 1 toggle bit
#define RC6_ADDRESS_LEN 8 // read 8 address bits
#define RC6_COMMAND_OFFSET 13 // skip 12 bits ("1" + 3 mode + 1 toggle + 8 address)
#define RC6_COMMAND_LEN 8 // read 8 command bits
#define RC6_COMPLETE_DATA_LEN_SHORT 21 // complete length
#define RC6_COMPLETE_DATA_LEN_LONG 36 // complete length
#define RC6_STOP_BIT 0 // has no stop bit
#define RC6_LSB 0 // MSB...LSB
#define RC6_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* RECS80EXT:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define RECS80EXT_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse
#define RECS80EXT_START_BIT_PAUSE_TIME 3637.0e-6 // 3637 usec pause
#define RECS80EXT_PULSE_TIME 158.0e-6 // 158 usec pulse
#define RECS80EXT_1_PAUSE_TIME 7432.0e-6 // 7432 usec pause
#define RECS80EXT_0_PAUSE_TIME 4902.0e-6 // 4902 usec pause
#define RECS80EXT_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
#define RECS80EXT_ADDRESS_OFFSET 2 // skip 2 bits (2nd start + 1 toggle)
#define RECS80EXT_ADDRESS_LEN 4 // read 4 address bits
#define RECS80EXT_COMMAND_OFFSET 6 // skip 6 bits (2nd start + 1 toggle + 4 address)
#define RECS80EXT_COMMAND_LEN 6 // read 6 command bits
#define RECS80EXT_COMPLETE_DATA_LEN 12 // complete length
#define RECS80EXT_STOP_BIT 1 // has stop bit
#define RECS80EXT_LSB 0 // MSB...LSB
#define RECS80EXT_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* NUBERT:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define NUBERT_START_BIT_PULSE_TIME 1340.0e-6 // 1340 usec pulse
#define NUBERT_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause
#define NUBERT_1_PULSE_TIME 1340.0e-6 // 1340 usec pulse
#define NUBERT_1_PAUSE_TIME 340.0e-6 // 340 usec pause
#define NUBERT_0_PULSE_TIME 500.0e-6 // 500 usec pulse
#define NUBERT_0_PAUSE_TIME 1300.0e-6 // 1300 usec pause
#define NUBERT_FRAMES 2 // Nubert sends 2 frames
#define NUBERT_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
#define NUBERT_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms
#define NUBERT_ADDRESS_OFFSET 0 // skip 0 bits
#define NUBERT_ADDRESS_LEN 0 // read 0 address bits
#define NUBERT_COMMAND_OFFSET 0 // skip 0 bits
#define NUBERT_COMMAND_LEN 10 // read 10 bits
#define NUBERT_COMPLETE_DATA_LEN 10 // complete length
#define NUBERT_STOP_BIT 1 // has stop bit
#define NUBERT_LSB 0 // MSB?
#define NUBERT_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* FAN: (ventilator)
*
* Similar to NUBERT, but
* - has data bit instead of stop bit
* - has NO frame repetition
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define FAN_START_BIT_PULSE_TIME 1280.0e-6 // 1280 usec pulse
#define FAN_START_BIT_PAUSE_TIME 380.0e-6 // 380 usec pause
#define FAN_1_PULSE_TIME 1280.0e-6 // 1280 usec pulse
#define FAN_1_PAUSE_TIME 380.0e-6 // 380 usec pause
#define FAN_0_PULSE_TIME 380.0e-6 // 380 usec pulse
#define FAN_0_PAUSE_TIME 1280.0e-6 // 1280 usec pause
#define FAN_FRAMES 1 // FAN sends only 1 frame (NUBERT sends 2)
#define FAN_AUTO_REPETITION_PAUSE_TIME 6.6e-3 // auto repetition after 6.6ms
#define FAN_FRAME_REPEAT_PAUSE_TIME 6.6e-3 // frame repeat after 6.6ms
#define FAN_ADDRESS_OFFSET 0 // skip 0 bits
#define FAN_ADDRESS_LEN 0 // read 0 address bits
#define FAN_COMMAND_OFFSET 0 // skip 0 bits
#define FAN_COMMAND_LEN 11 // read 10 bits
#define FAN_COMPLETE_DATA_LEN 11 // complete length
#define FAN_STOP_BIT 0 // has NO stop bit (fm: this seems to be wrong)
#define FAN_LSB 0 // MSB
#define FAN_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* SPEAKER:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define SPEAKER_START_BIT_PULSE_TIME 440.0e-6 // 440 usec pulse
#define SPEAKER_START_BIT_PAUSE_TIME 1250.0e-6 // 1250 usec pause
#define SPEAKER_1_PULSE_TIME 1250.0e-6 // 1250 usec pulse
#define SPEAKER_1_PAUSE_TIME 440.0e-6 // 440 usec pause
#define SPEAKER_0_PULSE_TIME 440.0e-6 // 440 usec pulse
#define SPEAKER_0_PAUSE_TIME 1250.0e-6 // 1250 usec pause
#define SPEAKER_FRAMES 2 // SPEAKER sends 2 frames
#define SPEAKER_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
#define SPEAKER_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 45ms
#define SPEAKER_ADDRESS_OFFSET 0 // skip 0 bits
#define SPEAKER_ADDRESS_LEN 0 // read 0 address bits
#define SPEAKER_COMMAND_OFFSET 0 // skip 0 bits
#define SPEAKER_COMMAND_LEN 10 // read 10 bits
#define SPEAKER_COMPLETE_DATA_LEN 10 // complete length
#define SPEAKER_STOP_BIT 1 // has stop bit
#define SPEAKER_LSB 0 // MSB?
#define SPEAKER_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* BANG_OLUFSEN:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define BANG_OLUFSEN_START_BIT1_PULSE_TIME 200.0e-6 // 200 usec pulse
#define BANG_OLUFSEN_START_BIT1_PAUSE_TIME 3125.0e-6 // 3125 usec pause
#define BANG_OLUFSEN_START_BIT2_PULSE_TIME 200.0e-6 // 200 usec pulse
#define BANG_OLUFSEN_START_BIT2_PAUSE_TIME 3125.0e-6 // 3125 usec pause
#define BANG_OLUFSEN_START_BIT3_PULSE_TIME 200.0e-6 // 200 usec pulse
#define BANG_OLUFSEN_START_BIT3_PAUSE_TIME 15625.0e-6 // 15625 usec pause
#define BANG_OLUFSEN_START_BIT4_PULSE_TIME 200.0e-6 // 200 usec pulse
#define BANG_OLUFSEN_START_BIT4_PAUSE_TIME 3125.0e-6 // 3125 usec pause
#define BANG_OLUFSEN_PULSE_TIME 200.0e-6 // 200 usec pulse
#define BANG_OLUFSEN_1_PAUSE_TIME 9375.0e-6 // 9375 usec pause
#define BANG_OLUFSEN_0_PAUSE_TIME 3125.0e-6 // 3125 usec pause
#define BANG_OLUFSEN_R_PAUSE_TIME 6250.0e-6 // 6250 usec pause (repeat last bit)
#define BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME 12500.0e-6 // 12500 usec pause (trailer bit)
#define BANG_OLUFSEN_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
#define BANG_OLUFSEN_ADDRESS_OFFSET 0 // no address bits
#define BANG_OLUFSEN_ADDRESS_LEN 0 // no address bits
#define BANG_OLUFSEN_COMMAND_OFFSET 3 // skip startbits 2, 3, 4
#define BANG_OLUFSEN_COMMAND_LEN 16 // read 16 command bits
#define BANG_OLUFSEN_COMPLETE_DATA_LEN 20 // complete length: startbits 2, 3, 4 + 16 data bits + trailer bit
#define BANG_OLUFSEN_STOP_BIT 1 // has stop bit
#define BANG_OLUFSEN_LSB 0 // MSB...LSB
#define BANG_OLUFSEN_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* GRUNDIG & NOKIA
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define GRUNDIG_NOKIA_IR60_BIT_TIME 528.0e-6 // 528 usec pulse/pause
#define GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME 2639.0e-6 // 2639 usec pause after pre bit
#define GRUNDIG_NOKIA_IR60_FRAME_REPEAT_PAUSE_TIME 117.76e-3 // info frame repeat after 117.76 ms
#define GRUNDIG_NOKIA_IR60_STOP_BIT 0 // has no stop bit
#define GRUNDIG_NOKIA_IR60_LSB 1 // MSB...LSB
#define GRUNDIG_NOKIA_IR60_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
#define GRUNDIG_FRAMES 2 // GRUNDIG sends each frame 1+1 times
#define GRUNDIG_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms
#define GRUNDIG_ADDRESS_OFFSET 0 // no address
#define GRUNDIG_ADDRESS_LEN 0 // no address
#define GRUNDIG_COMMAND_OFFSET 1 // skip 1 start bit
#define GRUNDIG_COMMAND_LEN 9 // read 9 command bits
#define GRUNDIG_COMPLETE_DATA_LEN 10 // complete length: 1 start bit + 9 data bits
#define NOKIA_FRAMES 3 // NOKIA sends each frame 1 + 1 + 1 times
#define NOKIA_AUTO_REPETITION_PAUSE_TIME 20.0e-3 // repetition after 20ms
#define NOKIA_ADDRESS_OFFSET 9 // skip 9 bits (1 start bit + 8 data bits)
#define NOKIA_ADDRESS_LEN 8 // 7 address bits
#define NOKIA_COMMAND_OFFSET 1 // skip 1 bit (1 start bit)
#define NOKIA_COMMAND_LEN 8 // read 8 command bits
#define NOKIA_COMPLETE_DATA_LEN 17 // complete length: 1 start bit + 8 address bits + 8 command bits
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* IR60:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define IR60_FRAMES 2 // IR60 sends each frame 1+1 times
#define IR60_AUTO_REPETITION_PAUSE_TIME 22.2e-3 // repetition after 22.2ms
#define IR60_TIMEOUT_TIME 5000.0e-6 // timeout grundig frame, switch to IR60
#define IR60_ADDRESS_OFFSET 0 // skip 1 bits
#define IR60_ADDRESS_LEN 0 // read 0 address bits
#define IR60_COMMAND_OFFSET 0 // skip 1 bit (start bit after pre bit, always 1)
#define IR60_COMMAND_LEN 7 // read 6 command bits
#define IR60_COMPLETE_DATA_LEN 7 // complete length
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* SIEMENS & RUWIDO:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#if 0
#define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 275.0e-6 // 275 usec pulse
#define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause
#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 275.0e-6 // 275 usec short pulse
#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 550.0e-6 // 550 usec long pulse
#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause
#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause
#else
#define SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME 370.0e-6 // 370 usec pulse
#define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME 550.0e-6 // 550 usec pause
#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME 370.0e-6 // 370 usec short pulse
#define SIEMENS_OR_RUWIDO_BIT_PULSE_TIME_2 680.0e-6 // 680 usec long pulse
#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME 275.0e-6 // 275 usec short pause
#define SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME_2 550.0e-6 // 550 usec long pause
#endif
#define SIEMENS_OR_RUWIDO_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
#define SIEMENS_OR_RUWIDO_STOP_BIT 0 // has no stop bit
#define SIEMENS_OR_RUWIDO_LSB 0 // MSB...LSB
#define SIEMENS_OR_RUWIDO_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
#define RUWIDO_ADDRESS_OFFSET 0 // skip 0 bits
#define RUWIDO_ADDRESS_LEN 9 // read 9 address bits
#define RUWIDO_COMMAND_OFFSET 9 // skip 9 bits
#define RUWIDO_COMMAND_LEN 8 // read 7 + 1 command bits, last bit is only check bit
#define RUWIDO_COMPLETE_DATA_LEN 17 // complete length
#define SIEMENS_ADDRESS_OFFSET 0 // skip 0 bits
#define SIEMENS_ADDRESS_LEN 11 // read 11 bits
#define SIEMENS_COMMAND_OFFSET 11 // skip 11 bits
#define SIEMENS_COMMAND_LEN 11 // read 10 + 1 command bits, last bit is only check bit
#define SIEMENS_COMPLETE_DATA_LEN 22 // complete length
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* FDC:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define FDC_START_BIT_PULSE_TIME 2085.0e-6 // 2085 usec pulse
#define FDC_START_BIT_PAUSE_TIME 966.0e-6 // 966 usec pause
#define FDC_PULSE_TIME 300.0e-6 // 300 usec pulse
#define FDC_1_PAUSE_TIME 715.0e-6 // 715 usec pause
#define FDC_0_PAUSE_TIME 220.0e-6 // 220 usec pause
#define FDC_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
#define FDC_ADDRESS_OFFSET 0 // skip 0 bits
#define FDC_ADDRESS_LEN 14 // read 14 address bits, but use only 6, shift 8 into command
#define FDC_COMMAND_OFFSET 20 // skip 20 bits
#define FDC_COMMAND_LEN 12 // read 12 bits
#define FDC_COMPLETE_DATA_LEN 40 // complete length
#define FDC_STOP_BIT 1 // has stop bit
#define FDC_LSB 1 // LSB...MSB
#define FDC_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* RCCAR:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define RCCAR_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse
#define RCCAR_START_BIT_PAUSE_TIME 2000.0e-6 // 2000 usec pause
#define RCCAR_PULSE_TIME 600.0e-6 // 360 usec pulse
#define RCCAR_1_PAUSE_TIME 450.0e-6 // 650 usec pause
#define RCCAR_0_PAUSE_TIME 900.0e-6 // 180 usec pause
#define RCCAR_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
#define RCCAR_ADDRESS_OFFSET 0 // skip 0 bits
#define RCCAR_ADDRESS_LEN 0 // read 0 address bits
#define RCCAR_COMMAND_OFFSET 0 // skip 0 bits
#define RCCAR_COMMAND_LEN 13 // read 13 bits
#define RCCAR_COMPLETE_DATA_LEN 13 // complete length
#define RCCAR_STOP_BIT 1 // has stop bit
#define RCCAR_LSB 1 // LSB...MSB
#define RCCAR_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* JVC:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define JVC_START_BIT_PULSE_TIME 9000.0e-6 // 9000 usec pulse
#define JVC_START_BIT_PAUSE_TIME 4500.0e-6 // 4500 usec pause
#define JVC_PULSE_TIME 560.0e-6 // 560 usec pulse
#define JVC_1_PAUSE_TIME 1690.0e-6 // 1690 usec pause
#define JVC_0_PAUSE_TIME 560.0e-6 // 560 usec pause
#define JVC_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms
#define JVC_ADDRESS_OFFSET 0 // skip 0 bits
#define JVC_ADDRESS_LEN 4 // read 4 address bits
#define JVC_COMMAND_OFFSET 4 // skip 4 bits
#define JVC_COMMAND_LEN 12 // read 12 bits
#define JVC_COMPLETE_DATA_LEN 16 // complete length
#define JVC_STOP_BIT 1 // has stop bit
#define JVC_LSB 1 // LSB...MSB
#define JVC_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* NIKON:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define NIKON_START_BIT_PULSE_TIME 2200.0e-6 // 2200 usec pulse
#define NIKON_START_BIT_PAUSE_TIME 27100.0e-6 // 27100 usec pause
#define NIKON_PULSE_TIME 500.0e-6 // 500 usec pulse
#define NIKON_1_PAUSE_TIME 3500.0e-6 // 3500 usec pause
#define NIKON_0_PAUSE_TIME 1500.0e-6 // 1500 usec pause
#define NIKON_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
#define NIKON_ADDRESS_OFFSET 0 // skip 0 bits
#define NIKON_ADDRESS_LEN 0 // read 0 address bits
#define NIKON_COMMAND_OFFSET 0 // skip 0 bits
#define NIKON_COMMAND_LEN 2 // read 2 bits
#define NIKON_COMPLETE_DATA_LEN 2 // complete length
#define NIKON_STOP_BIT 1 // has stop bit
#define NIKON_LSB 0 // LSB...MSB
#define NIKON_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* KATHREIN:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define KATHREIN_START_BIT_PULSE_TIME 210.0e-6 // 1340 usec pulse
#define KATHREIN_START_BIT_PAUSE_TIME 6218.0e-6 // 340 usec pause
#define KATHREIN_1_PULSE_TIME 210.0e-6 // 1340 usec pulse
#define KATHREIN_1_PAUSE_TIME 3000.0e-6 // 340 usec pause
#define KATHREIN_0_PULSE_TIME 210.0e-6 // 500 usec pulse
#define KATHREIN_0_PAUSE_TIME 1400.0e-6 // 1300 usec pause
#define KATHREIN_SYNC_BIT_PAUSE_LEN_TIME 4600.0e-6 // 4600 usec sync (on 6th and/or 8th bit)
#define KATHREIN_FRAMES 1 // Kathrein sends 1 frame
#define KATHREIN_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
#define KATHREIN_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms
#define KATHREIN_ADDRESS_OFFSET 1 // skip 1 bits
#define KATHREIN_ADDRESS_LEN 4 // read 4 address bits
#define KATHREIN_COMMAND_OFFSET 5 // skip 5 bits
#define KATHREIN_COMMAND_LEN 7 // read 7 bits
#define KATHREIN_COMPLETE_DATA_LEN 13 // complete length
#define KATHREIN_STOP_BIT 1 // has stop bit
#define KATHREIN_LSB 0 // MSB
#define KATHREIN_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* NETBOX:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define NETBOX_START_BIT_PULSE_TIME 2400.0e-6 // 2400 usec pulse
#define NETBOX_START_BIT_PAUSE_TIME 800.0e-6 // 800 usec pause
#define NETBOX_PULSE_TIME 800.0e-6 // 800 usec pulse
#define NETBOX_PAUSE_TIME 800.0e-6 // 800 usec pause
#define NETBOX_FRAMES 1 // Netbox sends 1 frame
#define NETBOX_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // auto repetition after 35ms
#define NETBOX_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms
#define NETBOX_ADDRESS_OFFSET 0 // skip 0 bits
#define NETBOX_ADDRESS_LEN 3 // read 3 address bits
#define NETBOX_COMMAND_OFFSET 3 // skip 3 bits
#define NETBOX_COMMAND_LEN 13 // read 13 bits
#define NETBOX_COMPLETE_DATA_LEN 16 // complete length
#define NETBOX_STOP_BIT 0 // has no stop bit
#define NETBOX_LSB 1 // LSB
#define NETBOX_FLAGS IRMP_PARAM_FLAG_IS_SERIAL // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* LEGO:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define LEGO_START_BIT_PULSE_TIME 158.0e-6 // 158 usec pulse ( 6 x 1/38kHz)
#define LEGO_START_BIT_PAUSE_TIME 1026.0e-6 // 1026 usec pause (39 x 1/38kHz)
#define LEGO_PULSE_TIME 158.0e-6 // 158 usec pulse ( 6 x 1/38kHz)
#define LEGO_1_PAUSE_TIME 553.0e-6 // 553 usec pause (21 x 1/38kHz)
#define LEGO_0_PAUSE_TIME 263.0e-6 // 263 usec pause (10 x 1/38kHz)
#define LEGO_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
#define LEGO_ADDRESS_OFFSET 0 // skip 0 bits
#define LEGO_ADDRESS_LEN 0 // read 0 address bits
#define LEGO_COMMAND_OFFSET 0 // skip 0 bits
#define LEGO_COMMAND_LEN 16 // read 16 bits (12 command + 4 CRC)
#define LEGO_COMPLETE_DATA_LEN 16 // complete length
#define LEGO_STOP_BIT 1 // has stop bit
#define LEGO_LSB 0 // MSB...LSB
#define LEGO_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* THOMSON:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define THOMSON_PULSE_TIME 550.0e-6 // 550 usec pulse
#define THOMSON_1_PAUSE_TIME 4500.0e-6 // 4500 usec pause
#define THOMSON_0_PAUSE_TIME 2000.0e-6 // 2000 usec pause
#define THOMSON_FRAMES 1 // THOMSON sends 1 frame
#define THOMSON_AUTO_REPETITION_PAUSE_TIME 35.0e-3 // repetition after 35ms
#define THOMSON_FRAME_REPEAT_PAUSE_TIME 35.0e-3 // frame repeat after 35ms
#define THOMSON_ADDRESS_OFFSET 0 // skip 0 bits
#define THOMSON_ADDRESS_LEN 4 // read 4 address bits
#define THOMSON_COMMAND_OFFSET 5 // skip 4 address bits + 1 toggle bit
#define THOMSON_COMMAND_LEN 7 // read 7 command bits
#define THOMSON_COMPLETE_DATA_LEN 12 // complete length
#define THOMSON_STOP_BIT 1 // has stop bit
#define THOMSON_LSB 0 // MSB...LSB
#define THOMSON_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* BOSE:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define BOSE_START_BIT_PULSE_TIME 1060.0e-6 // 1060 usec pulse
#define BOSE_START_BIT_PAUSE_TIME 1425.0e-6 // 1425 usec pause
#define BOSE_PULSE_TIME 550.0e-6 // 550 usec pulse
#define BOSE_1_PAUSE_TIME 1425.0e-6 // 1425 usec pause
#define BOSE_0_PAUSE_TIME 437.0e-6 // 437 usec pause
#define BOSE_FRAMES 1
#define BOSE_AUTO_REPETITION_PAUSE_TIME 40.0e-3 // repetition after 40ms?
#define BOSE_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms?
#define BOSE_ADDRESS_OFFSET 0 // skip 0 bits
#define BOSE_ADDRESS_LEN 0 // read 16 address bits
#define BOSE_COMMAND_OFFSET 0 // skip 16 bits (8 address + 8 /address)
#define BOSE_COMMAND_LEN 16 // read 16 bits (8 command + 8 /command)
#define BOSE_COMPLETE_DATA_LEN 16 // complete length
#define BOSE_STOP_BIT 1 // has stop bit
#define BOSE_LSB 1 // LSB...MSB
#define BOSE_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* A1TVBOX:
* In reality A1 TV Box has no start bit with 300/340 usec. There are 2 start bits "10" with 250us pulse + 150us pause + 150us pause + 250us pulse
* This is not very easy to detect, because 1st and 2nd pause of both start bits are closely spaced.
* So IRMP looks for pseudo start bit with 300/340 usec and ignores the second half of the 2nd bit (250us pulse)
* This method only works because the first data bit (which is the 3rd bit) following is always "1":
* IRMP treats the first "long" pulse (250us of 2nd start bit + 250us of 1st data bit) of this "1" as a first _short_ pulse.
* This is a bug in IRMP's manchester decoder, but a good feature here ;-)
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define A1TVBOX_START_BIT_PULSE_TIME 300.0e-6 // 300 usec pulse
#define A1TVBOX_START_BIT_PAUSE_TIME 340.0e-6 // 340 usec pause
#define A1TVBOX_BIT_PULSE_TIME 250.0e-6 // 250 usec pulse
#define A1TVBOX_BIT_PAUSE_TIME 150.0e-6 // 150 usec pulse
#define A1TVBOX_STOP_BIT 0 // has no stop bit
#define A1TVBOX_LSB 0 // MSB...LSB
#define A1TVBOX_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1 ) // flags
#define A1TVBOX_FRAMES 1 // A1TVBOX sends each frame 1 times
#define A1TVBOX_ADDRESS_OFFSET 1 // skip 1 bits
#define A1TVBOX_ADDRESS_LEN 8 // read 8 address bits
#define A1TVBOX_COMMAND_OFFSET 9 // skip 9 bits (start bit + address)
#define A1TVBOX_COMMAND_LEN 8 // read 8 command bits
#define A1TVBOX_COMPLETE_DATA_LEN 17 // complete length incl. start bit
#define A1TVBOX_FRAME_REPEAT_PAUSE_TIME 50.0e-3 // 50 msec pause between frames, don't know if it is correct
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* MERLIN:
* See notes for A1TVBOX
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define MERLIN_START_BIT_PULSE_TIME 210.0e-6 // 210 usec pulse
#define MERLIN_START_BIT_PAUSE_TIME 420.0e-6 // 429 usec pause
#define MERLIN_BIT_PULSE_TIME 210.0e-6 // 210 usec pulse
#define MERLIN_BIT_PAUSE_TIME 210.0e-6 // 210 usec pulse
#define MERLIN_STOP_BIT 0 // has no stop bit
#define MERLIN_LSB 0 // MSB...LSB
#define MERLIN_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1 ) // flags
#define MERLIN_FRAMES 1 // MERLIN sends each frame 1 times
#define MERLIN_ADDRESS_OFFSET 2 // skip 1 bits
#define MERLIN_ADDRESS_LEN 9 // read 9 address bits
#define MERLIN_COMMAND_OFFSET 11 // skip 11 bits (start bit + address)
#define MERLIN_COMMAND_LEN 32 // read up to 32 command bits
#define MERLIN_COMPLETE_DATA_LEN 45 // complete length incl. start bit
#define MERLIN_FRAME_REPEAT_PAUSE_TIME 50.0e-3 // 50 msec pause between frames, don't know if it is correct
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* ORTEK (Hama): 6 address bits + 2 frame type bits + 6 command bits + 1 parity bit + 1 unknown bit + "1" + "0"
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define ORTEK_START_BIT_PULSE_TIME 2000.0e-6 // 2000 usec pulse
#define ORTEK_START_BIT_PAUSE_TIME 1000.0e-6 // 1000 usec pause
#define ORTEK_BIT_TIME 500.0e-6 // 500 usec pulse/pause
#define ORTEK_FRAME_REPEAT_PAUSE_TIME 45.0e-3 // frame repeat after 45ms
#define ORTEK_ADDRESS_OFFSET 0 // skip 0 bits
#define ORTEK_ADDRESS_LEN 8 // read 6 address bits + 2 special bits
#define ORTEK_COMMAND_OFFSET 8 // skip 6 address bits + 2 special bits
#define ORTEK_COMMAND_LEN 6 // read 6 command bits
#define ORTEK_COMPLETE_DATA_LEN 18 // complete length
#define ORTEK_STOP_BIT 0 // has no stop bit
#define ORTEK_LSB 0 // MSB...LSB
#define ORTEK_FLAGS (IRMP_PARAM_FLAG_IS_MANCHESTER | IRMP_PARAM_FLAG_1ST_PULSE_IS_1) // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* TELEFUNKEN:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define TELEFUNKEN_START_BIT_PULSE_TIME 600.0e-6 // 600 usec pulse
#define TELEFUNKEN_START_BIT_PAUSE_TIME 1500.0e-6 // 1500 usec pause
#define TELEFUNKEN_PULSE_TIME 600.0e-6 // 600 usec pulse
#define TELEFUNKEN_1_PAUSE_TIME 1500.0e-6 // 1500 usec pause
#define TELEFUNKEN_0_PAUSE_TIME 600.0e-6 // 600 usec pause
#define TELEFUNKEN_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after XX ms ?????
#define TELEFUNKEN_ADDRESS_OFFSET 0 // skip 0 bits
#define TELEFUNKEN_ADDRESS_LEN 0 // read 0 address bits
#define TELEFUNKEN_COMMAND_OFFSET 0 // skip 0 bits
#define TELEFUNKEN_COMMAND_LEN 15 // read 15 bits
#define TELEFUNKEN_COMPLETE_DATA_LEN 15 // complete length
#define TELEFUNKEN_STOP_BIT 1 // has stop bit
#define TELEFUNKEN_LSB 0 // LSB...MSB
#define TELEFUNKEN_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* ROOMBA
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define ROOMBA_START_BIT_PULSE_TIME 2790.0e-6 // 2790 usec pulse
#define ROOMBA_START_BIT_PAUSE_TIME 930.0e-6 // 930 usec pause
#define ROOMBA_0_PULSE_TIME 930.0e-6 // 930 usec pulse
#define ROOMBA_1_PULSE_TIME 2790.0e-6 // 2790 usec pulse
#define ROOMBA_0_PAUSE_TIME 2790.0e-6 // 2790 usec pause
#define ROOMBA_1_PAUSE_TIME 930.0e-6 // 930 usec pause
#define ROOMBA_FRAME_REPEAT_PAUSE_TIME 18.0e-3 // frame repeat after 18ms
#define ROOMBA_ADDRESS_OFFSET 0 // skip 0 bits
#define ROOMBA_ADDRESS_LEN 0 // read 0 address bits
#define ROOMBA_COMMAND_OFFSET 0 // skip 0 bits
#define ROOMBA_COMMAND_LEN 7 // read 7 bits
#define ROOMBA_COMPLETE_DATA_LEN 7 // complete length
#define ROOMBA_STOP_BIT 0 // has stop bit (fm: sure?)
#define ROOMBA_LSB 0 // MSB...LSB
#define ROOMBA_FLAGS 0 // flags
#define ROOMBA_FRAMES 8 // ROOMBA sends 8 frames (this is a lie, but more comfortable)
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* RC-MM (32, 24, or 12 bit)
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define RCMM32_START_BIT_PULSE_TIME 500.0e-6 // 500 usec pulse
#define RCMM32_START_BIT_PAUSE_TIME 220.0e-6 // 220 usec pause
#define RCMM32_PULSE_TIME 230.0e-6 // 230 usec pulse
#define RCMM32_00_PAUSE_TIME 220.0e-6 // 220 usec pause
#define RCMM32_01_PAUSE_TIME 370.0e-6 // 370 usec pause
#define RCMM32_10_PAUSE_TIME 540.0e-6 // 540 usec pause
#define RCMM32_11_PAUSE_TIME 720.0e-6 // 720 usec pause
#define RCMM32_FRAME_REPEAT_PAUSE_TIME 80.0e-3 // frame repeat after 80 ms
#define RCMM32_ADDRESS_OFFSET 0 // skip 0 bits
#define RCMM32_ADDRESS_LEN 16 // read 16 address bits
#define RCMM32_COMMAND_OFFSET 17 // skip 17 bits
#define RCMM32_COMMAND_LEN 15 // read 15 bits
#define RCMM32_COMPLETE_DATA_LEN 32 // complete length
#define RCMM32_STOP_BIT 1 // has stop bit
#define RCMM32_LSB 0 // LSB...MSB
#define RCMM32_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* PENTAX:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define PENTAX_START_BIT_PULSE_TIME 13000.0e-6 // 13 msec pulse
#define PENTAX_START_BIT_PAUSE_TIME 3000.0e-6 // 3 msec pause
#define PENTAX_PULSE_TIME 1000.0e-6 // 1 msec pulse
#define PENTAX_1_PAUSE_TIME 3000.0e-6 // 3 msec pause
#define PENTAX_0_PAUSE_TIME 1000.0e-6 // 1 msec pause
#define PENTAX_FRAME_REPEAT_PAUSE_TIME 60.0e-3 // frame repeat after 60ms
#define PENTAX_ADDRESS_OFFSET 0 // skip 0 bits
#define PENTAX_ADDRESS_LEN 0 // read 0 address bits
#define PENTAX_COMMAND_OFFSET 0 // skip 0 bits
#define PENTAX_COMMAND_LEN 6 // read 6 bits
#define PENTAX_COMPLETE_DATA_LEN 6 // complete length
#define PENTAX_STOP_BIT 1 // has stop bit
#define PENTAX_LSB 0 // LSB...MSB
#define PENTAX_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* ACP24: Stiebel Eltron ACP24 air conditioner
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define ACP24_START_BIT_PULSE_TIME 390.0e-6 // 390 usec pulse
#define ACP24_START_BIT_PAUSE_TIME 950.0e-6 // 950 usec pause
#define ACP24_PULSE_TIME 390.0e-6 // 390 usec pulse
#define ACP24_1_PAUSE_TIME 1300.0e-6 // 1300 usec pause
#define ACP24_0_PAUSE_TIME 950.0e-6 // 950 usec pause
#define ACP24_FRAME_REPEAT_PAUSE_TIME 22.0e-3 // frame repeat after 22ms?
#define ACP24_ADDRESS_OFFSET 0 // skip 0 bits
#define ACP24_ADDRESS_LEN 0 // read 6 address bits
#define ACP24_COMMAND_OFFSET 0 // skip 6 bits
#define ACP24_COMMAND_LEN 0 // read 0 bits (70 bits will be read and compressed by special routine)
#define ACP24_COMPLETE_DATA_LEN 70 // complete length
#define ACP24_STOP_BIT 1 // has stop bit
#define ACP24_LSB 0 // LSB...MSB
#define ACP24_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* IRMP16:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define IRMP16_START_BIT_PULSE_TIME 842.0e-6 // 842 usec pulse (32 x 1/38kHz)
#define IRMP16_START_BIT_PAUSE_TIME 1052.0e-6 // 1052 usec pause (40 x 1/38kHz)
#define IRMP16_PULSE_TIME 421.0e-6 // 421 usec pulse (16 x 1/38kHz)
#define IRMP16_1_PAUSE_TIME 842.0e-6 // 842 usec pause (32 x 1/38kHz)
#define IRMP16_0_PAUSE_TIME 421.0e-6 // 421 usec pause (16 x 1/38kHz)
#define IRMP16_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
#define IRMP16_ADDRESS_OFFSET 0 // skip 0 bits
#define IRMP16_ADDRESS_LEN 0 // read 0 address bits
#define IRMP16_COMMAND_OFFSET 0 // skip 0 bits
#define IRMP16_COMMAND_LEN 16 // read 16 bits (12 command + 4 CRC)
#define IRMP16_COMPLETE_DATA_LEN 16 // complete length
#define IRMP16_STOP_BIT 1 // has stop bit
#define IRMP16_LSB 1 // LSB...MSB
#define IRMP16_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* GREE - climate:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define GREE_START_BIT_PULSE_TIME 12000.0e-6 // 12000 usec pulse (32 x 1/38kHz)
#define GREE_START_BIT_PAUSE_TIME 6000.0e-6 // 6000 usec pause (40 x 1/38kHz)
#define GREE_PULSE_TIME 900.0e-6 // 900 usec pulse (16 x 1/38kHz)
#define GREE_1_PAUSE_TIME 700.0e-6 // 700 usec pause (32 x 1/38kHz)
#define GREE_0_PAUSE_TIME 2100.0e-6 // 2100 usec pause (16 x 1/38kHz)
#define GREE_FRAME_REPEAT_PAUSE_TIME 40.0e-3 // frame repeat after 40ms
#define GREE_ADDRESS_OFFSET 0 // skip 0 bits
#define GREE_ADDRESS_LEN 16 // read 16 address bits
#define GREE_COMMAND_OFFSET 16 // skip 16 bits
#define GREE_COMMAND_LEN 16 // read 16 bits
#define GREE_COMPLETE_DATA_LEN 32 // complete length
#define GREE_STOP_BIT 1 // has stop bit
#define GREE_LSB 1 // LSB...MSB
#define GREE_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* METZ:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define METZ_START_BIT_PULSE_TIME 870.0e-6 // 870 usec pulse
#define METZ_START_BIT_PAUSE_TIME 2300.0e-6 // 2300 usec pause
#define METZ_PULSE_TIME 435.0e-6 // 435 usec pulse
#define METZ_1_PAUSE_TIME 1680.0e-6 // 1680 usec pause
#define METZ_0_PAUSE_TIME 960.0e-6 // 960 usec pause
#define METZ_FRAME_REPEAT_PAUSE_TIME 122.0e-3 // frame repeat after 122ms
#define METZ_ADDRESS_OFFSET 1 // skip 1 bit (toggle bit)
#define METZ_ADDRESS_LEN 6 // read 6 address bits
#define METZ_COMMAND_OFFSET 7 // skip 7 bits
#define METZ_COMMAND_LEN 13 // read 13 bits
#define METZ_COMPLETE_DATA_LEN 20 // complete length
#define METZ_STOP_BIT 0 // has no stop bit
#define METZ_LSB 0 // MSB...LSB
#define METZ_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* RADIO1 - e.g. Tevion
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define RADIO1_START_BIT_PULSE_TIME 3000.0e-6 // 3000 usec pulse
#define RADIO1_START_BIT_PAUSE_TIME 7000.0e-6 // 7000 usec pulse
#define RADIO1_0_PULSE_TIME 500.0e-6 // 500 usec pulse
#define RADIO1_0_PAUSE_TIME 1000.0e-6 // 1000 usec pause
#define RADIO1_1_PULSE_TIME 1000.0e-6 // 1000 usec pulse
#define RADIO1_1_PAUSE_TIME 500.0e-6 // 500 usec pause
#define RADIO1_FRAME_REPEAT_PAUSE_TIME 25.0e-3 // frame repeat after 25ms
#define RADIO1_ADDRESS_OFFSET 4 // skip 4 bits
#define RADIO1_ADDRESS_LEN 16 // read 16 address bits
#define RADIO1_COMMAND_OFFSET 20 // skip 4 + 16 bits
#define RADIO1_COMMAND_LEN 3 // read 3 command bits
#define RADIO1_COMPLETE_DATA_LEN 23 // complete length
#define RADIO1_STOP_BIT 1 // has stop bit
#define RADIO1_LSB 1 // LSB...MSB?
#define RADIO1_FLAGS 0 // flags
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Frame Repetitions:
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define AUTO_FRAME_REPETITION_TIME 80.0e-3 // SIRCS/SAMSUNG32/NUBERT: automatic repetition after 25-50ms
#endif // _IRMP_PROTOCOLS_H_