/*---------------------------------------------------------------------------------------------------------------------------------------------------
* irmpconfig.h
*
* DO NOT INCLUDE THIS FILE, WILL BE INCLUDED BY IRMP.H!
*
* Copyright (c) 2009-2019 Frank Meyer - frank(at)fli4l.de
* Extensions for PIC 12F1820 W.Strobl 2014-07-20
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef _IRMP_H_
# error please include only irmp.h, not irmpconfig.h
#endif
#ifdef IRMPCONFIG_STAGE1_H
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change IRMP_32_BIT here
*
* Normally, IRMP_32_BIT ist 0. Then we use irmp.command as a 16 bit value.
* If you set IRMP_32_BIT to 1, we will use irmp.command as a 32 bit value.
* A 32 bit command costs more CPU resources on 8 bit processors (e.g. AVR),
* but there are IR protocols which need more than 16 bits for a reasonable
* command value.
*
* If you want to use one of the following protocols, set IRMP_32_BIT to 1,
* otherwise set it to 0:
* - MERLIN
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#define IRMP_32_BIT 1 // use 32 bit command value, 0 or 1
#endif // IRMPCONFIG_STAGE1_H
#ifdef IRMPCONFIG_STAGE2_H
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change F_INTERRUPTS if you change the number of interrupts per second,
* Normally, F_INTERRUPTS should be in the range from 10000 to 15000, typical is 15000
* A value above 15000 costs additional program space, absolute maximum value is 20000.
* On PIC with XC8/C18 Compiler, use 15151 as the correct value.
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef F_INTERRUPTS
# define F_INTERRUPTS 20000 // interrupts per second, min: 10000, max: 20000, typ: 15000
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change settings from 1 to 0 if you want to disable one or more decoders.
* This saves program space.
*
* 1 enable decoder
* 0 disable decoder
*
* The standard decoders are enabled per default.
* Less common protocols are disabled here, you need to enable them manually.
*
* If you want to use FDC or RCCAR simultaneous with RC5 protocol, additional program space is required.
* If you don't need RC5 when using FDC/RCCAR, you should disable RC5.
* You cannot enable both DENON and RUWIDO, only enable one of them.
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
// typical protocols, disable here! Enable Remarks F_INTERRUPTS Program Space
#define IRMP_SUPPORT_SIRCS_PROTOCOL 1 // Sony SIRCS >= 10000 ~150 bytes
#define IRMP_SUPPORT_NEC_PROTOCOL 1 // NEC + APPLE + ONKYO >= 10000 ~300 bytes
#define IRMP_SUPPORT_SAMSUNG_PROTOCOL 1 // Samsung + Samsg32 >= 10000 ~300 bytes
#define IRMP_SUPPORT_KASEIKYO_PROTOCOL 1 // Kaseikyo >= 10000 ~250 bytes
// more protocols, enable here! Enable Remarks F_INTERRUPTS Program Space
#define IRMP_SUPPORT_JVC_PROTOCOL 1 // JVC >= 10000 ~150 bytes
#define IRMP_SUPPORT_NEC16_PROTOCOL 1 // NEC16 >= 10000 ~100 bytes
#define IRMP_SUPPORT_NEC42_PROTOCOL 1 // NEC42 >= 10000 ~300 bytes
#define IRMP_SUPPORT_MATSUSHITA_PROTOCOL 1 // Matsushita >= 10000 ~50 bytes
#define IRMP_SUPPORT_DENON_PROTOCOL 1 // DENON, Sharp >= 10000 ~250 bytes
#define IRMP_SUPPORT_RC5_PROTOCOL 1 // RC5 >= 10000 ~250 bytes
#define IRMP_SUPPORT_RC6_PROTOCOL 1 // RC6 & RC6A >= 10000 ~250 bytes
#define IRMP_SUPPORT_IR60_PROTOCOL 1 // IR60 (SDA2008) >= 10000 ~300 bytes
#define IRMP_SUPPORT_GRUNDIG_PROTOCOL 1 // Grundig >= 10000 ~300 bytes
#define IRMP_SUPPORT_SIEMENS_PROTOCOL 1 // Siemens Gigaset >= 15000 ~550 bytes
#define IRMP_SUPPORT_NOKIA_PROTOCOL 1 // Nokia >= 10000 ~300 bytes
// exotic protocols, enable here! Enable Remarks F_INTERRUPTS Program Space
#define IRMP_SUPPORT_BOSE_PROTOCOL 1 // BOSE >= 10000 ~150 bytes
#define IRMP_SUPPORT_KATHREIN_PROTOCOL 1 // Kathrein >= 10000 ~200 bytes
#define IRMP_SUPPORT_NUBERT_PROTOCOL 1 // NUBERT >= 10000 ~50 bytes
#define IRMP_SUPPORT_FAN_PROTOCOL 0 // FAN (ventilator) >= 10000 ~50 bytes
#define IRMP_SUPPORT_SPEAKER_PROTOCOL 1 // SPEAKER (~NUBERT) >= 10000 ~50 bytes
#define IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL 1 // Bang & Olufsen >= 10000 ~200 bytes
#define IRMP_SUPPORT_RECS80_PROTOCOL 1 // RECS80 (SAA3004) >= 15000 ~50 bytes
#define IRMP_SUPPORT_RECS80EXT_PROTOCOL 1 // RECS80EXT (SAA3008) >= 15000 ~50 bytes
#define IRMP_SUPPORT_THOMSON_PROTOCOL 1 // Thomson >= 10000 ~250 bytes
#define IRMP_SUPPORT_NIKON_PROTOCOL 1 // NIKON camera >= 10000 ~250 bytes
#define IRMP_SUPPORT_NETBOX_PROTOCOL 1 // Netbox keyboard >= 10000 ~400 bytes (PROTOTYPE!)
#define IRMP_SUPPORT_ORTEK_PROTOCOL 0 // ORTEK (Hama) >= 10000 ~150 bytes
#define IRMP_SUPPORT_TELEFUNKEN_PROTOCOL 1 // Telefunken 1560 >= 10000 ~150 bytes
#define IRMP_SUPPORT_FDC_PROTOCOL 1 // FDC3402 keyboard >= 10000 (better 15000) ~150 bytes (~400 in combination with RC5)
#define IRMP_SUPPORT_RCCAR_PROTOCOL 1 // RC Car >= 10000 (better 15000) ~150 bytes (~500 in combination with RC5)
#define IRMP_SUPPORT_ROOMBA_PROTOCOL 0 // iRobot Roomba >= 10000 ~150 bytes
#define IRMP_SUPPORT_RUWIDO_PROTOCOL 0 // RUWIDO, T-Home >= 15000 ~550 bytes
#define IRMP_SUPPORT_A1TVBOX_PROTOCOL 1 // A1 TV BOX >= 15000 (better 20000) ~300 bytes
#define IRMP_SUPPORT_LEGO_PROTOCOL 1 // LEGO Power RC >= 20000 ~150 bytes
#define IRMP_SUPPORT_RCMM_PROTOCOL 1 // RCMM 12,24, or 32 >= 20000 ~150 bytes
#define IRMP_SUPPORT_LGAIR_PROTOCOL 1 // LG Air Condition >= 10000 ~300 bytes
#define IRMP_SUPPORT_SAMSUNG48_PROTOCOL 1 // Samsung48 >= 10000 ~100 bytes (SAMSUNG must be enabled!)
#define IRMP_SUPPORT_MERLIN_PROTOCOL 0 // Merlin >= 15000 (better 20000) ~300 bytes
#define IRMP_SUPPORT_PENTAX_PROTOCOL 0 // Pentax >= 10000 ~150 bytes
#define IRMP_SUPPORT_S100_PROTOCOL 0 // S100 >= 10000 ~250 bytes
#define IRMP_SUPPORT_ACP24_PROTOCOL 0 // ACP24 >= 10000 ~250 bytes
#define IRMP_SUPPORT_TECHNICS_PROTOCOL 1 // TECHNICS >= 10000 ~250 bytes
#define IRMP_SUPPORT_PANASONIC_PROTOCOL 0 // PANASONIC Beamer >= 10000 ~250 bytes
#define IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL 1 // Mitsubishi Aircond >= 10000 ~250 bytes
#define IRMP_SUPPORT_VINCENT_PROTOCOL 1 // VINCENT >= 10000 ~250 bytes
#define IRMP_SUPPORT_SAMSUNGAH_PROTOCOL 1 // SAMSUNG AH >= 10000 ~250 bytes
#define IRMP_SUPPORT_IRMP16_PROTOCOL 1 // IRMP specific >= 15000 ~250 bytes
#define IRMP_SUPPORT_GREE_PROTOCOL 0 // GREE CLIMATE >= 10000 ~250 bytes
#define IRMP_SUPPORT_RCII_PROTOCOL 0 // RCII T+A >= 15000 ~250 bytes
#define IRMP_SUPPORT_METZ_PROTOCOL 1 // METZ >= 15000 ~250 bytes
#define IRMP_SUPPORT_RADIO1_PROTOCOL 0 // RADIO, e.g. TEVION >= 10000 ~250 bytes (experimental)
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change hardware pin here for ATMEL ATMega/ATTiny/XMega
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#if defined (ATMEL_AVR) || defined (__AVR_XMEGA__) // use PB6 as IR input on AVR
# define IRMP_PORT_LETTER B
# define IRMP_BIT_NUMBER 6
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change hardware pin here for PIC C18 or XC8 compiler
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#elif defined (PIC_C18) // use RB4 as IR input on PIC (C18 or XC8 compiler)
# if defined(__12F1840)
# define IRMP_PIN RA5 // on 12F1840 with XC8 compiler
# else
# define IRMP_PIN PORTBbits.RB4 // PIC C18
# endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change hardware pin here for PIC CCS compiler
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#elif defined (PIC_CCS)
# define IRMP_PIN PIN_B4 // use PB4 as IR input on PIC (CCS compiler)
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change hardware pin here for ARM STM32
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#elif defined (ARM_STM32) // use C13 as IR input on STM32
# define IRMP_PORT_LETTER C
# define IRMP_BIT_NUMBER 13
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Hardware pin for ARM STM32 (HAL) - don't change here, define IRMP_RECEIVE_GPIO_Port & IRMP_RECEIVE_PIN in STM32Cube (Main.h)
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#elif defined (ARM_STM32_HAL) // STM32: IRMP_RECEIVE_GPIO_Port & IRMP_RECEIVE_PIN must be defined in STM32Cube
# define IRMP_PORT_LETTER IRMP_Receive_GPIO_Port
# define IRMP_BIT_NUMBER IRMP_Receive_Pin
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change hardware pin here for Stellaris ARM Cortex M4
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#elif defined (STELLARIS_ARM_CORTEX_M4) // use B4 as IR input on Stellaris LM4F
# define IRMP_PORT_LETTER B
# define IRMP_BIT_NUMBER 4
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change hardware pin here for STM8
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#elif defined (SDCC_STM8) // use PA1 as IR input on STM8
# define IRMP_PORT_LETTER A
# define IRMP_BIT_NUMBER 1
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change hardware pin here for ESP8266
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#elif defined (__xtensa__)
# define IRMP_BIT_NUMBER 12 // use GPIO12 (Pin 7 UEXT) on ESP8266-EVB evaluation board
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change hardware pin here for Teensy 3.x with teensyduino gcc compiler
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#elif defined (TEENSY_ARM_CORTEX_M4)
# define IRMP_PIN 1 // use Digital pin 1 as IR input on Teensy
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change hardware pin here for MBED
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#elif defined(__MBED__)
# define IRMP_PIN P0_22 // use P1_27 on LPC1347
# define IRMP_PINMODE PullUp // hardware dependent
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Change hardware pin here for ChibiOS HAL
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#elif defined(_CHIBIOS_HAL_)
# define IRMP_PIN LINE_IR_IN // use pin names as defined in the board config file, prefixed with "LINE_"
# define IRMP_LOGGING_SD SD1 // the ChibiOS HAL Serial Driver instance to log to
// (when IRMP_LOGGING is enabled below).
// Make sure SERIAL_BUFFERS_SIZE is large enough when enabling logging
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Handling of unknown target system: DON'T CHANGE
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#elif !defined (UNIX_OR_WINDOWS)
# error target system not defined.
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Set IRMP_LOGGING to 1 if want to log data to UART with 9600Bd
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef IRMP_LOGGING
# define IRMP_LOGGING 0 // 1: log IR signal (scan), 0: do not. default is 0
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Use external logging routines
* If you enable external logging, you have also to enable IRMP_LOGGING above
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef IRMP_EXT_LOGGING
# define IRMP_EXT_LOGGING 0 // 1: use external logging, 0: do not. default is 0
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Set IRMP_PROTOCOL_NAMES to 1 if want to access protocol names (for logging etc), costs ~300 bytes RAM!
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef IRMP_PROTOCOL_NAMES
# define IRMP_PROTOCOL_NAMES 0 // 1: access protocol names, 0: do not. default is 0
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Use Callbacks to indicate input signal
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef IRMP_USE_CALLBACK
# define IRMP_USE_CALLBACK 0 // 1: use callbacks. 0: do not. default is 0
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Call the user-provided irmp_idle() function when IRMP is idle.
* Can be used to disable the timer irq and enter a sleep mode to save power
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#ifndef IRMP_USE_IDLE_CALL
# define IRMP_USE_IDLE_CALL 0 // 1: use idle calls. 0: do not. default is 0
#endif
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* Use ChibiOS Events to signal that valid IR data was received
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
#if defined(_CHIBIOS_RT_) || defined(_CHIBIOS_NIL_)
# ifndef IRMP_USE_EVENT
# define IRMP_USE_EVENT 0 // 1: use event. 0: do not. default is 0
# endif
# if IRMP_USE_EVENT == 1 && !defined(IRMP_EVENT_BIT)
# define IRMP_EVENT_BIT 1 // event flag or bit to send
# endif
# if IRMP_USE_EVENT == 1 && !defined(IRMP_EVENT_THREAD_PTR)
# define IRMP_EVENT_THREAD_PTR ir_receive_thread_p // pointer to the thread to send the event to
extern thread_t *IRMP_EVENT_THREAD_PTR; // the pointer must be defined and initialized elsewhere
# endif
#endif // _CHIBIOS_RT_ || _CHIBIOS_NIL_
#endif // _IRMPCONFIG_STAGE2_H_