## ## This file is part of the libsigrokdecode project. ## ## Copyright (C) 2012 Uwe Hermann ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ## ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## import sigrokdecode as srd cmd_name = { # Normal commands (CMD) 0: 'GO_IDLE_STATE', 1: 'SEND_OP_COND', 6: 'SWITCH_FUNC', 8: 'SEND_IF_COND', 9: 'SEND_CSD', 10: 'SEND_CID', 12: 'STOP_TRANSMISSION', 13: 'SEND_STATUS', 16: 'SET_BLOCKLEN', 17: 'READ_SINGLE_BLOCK', 18: 'READ_MULTIPLE_BLOCK', 24: 'WRITE_BLOCK', 25: 'WRITE_MULTIPLE_BLOCK', 27: 'PROGRAM_CSD', 28: 'SET_WRITE_PROT', 29: 'CLR_WRITE_PROT', 30: 'SEND_WRITE_PROT', 32: 'ERASE_WR_BLK_START_ADDR', 33: 'ERASE_WR_BLK_END_ADDR', 38: 'ERASE', 42: 'LOCK_UNLOCK', 55: 'APP_CMD', 56: 'GEN_CMD', 58: 'READ_OCR', 59: 'CRC_ON_OFF', # CMD60-63: Reserved for manufacturer # Application-specific commands (ACMD) 13: 'SD_STATUS', 18: 'Reserved for SD security applications', 22: 'SEND_NUM_WR_BLOCKS', 23: 'SET_WR_BLK_ERASE_COUNT', 25: 'Reserved for SD security applications', 26: 'Reserved for SD security applications', 38: 'Reserved for SD security applications', 41: 'SD_SEND_OP_COND', 42: 'SET_CLR_CARD_DETECT', 43: 'Reserved for SD security applications', 44: 'Reserved for SD security applications', 45: 'Reserved for SD security applications', 46: 'Reserved for SD security applications', 47: 'Reserved for SD security applications', 48: 'Reserved for SD security applications', 49: 'Reserved for SD security applications', 51: 'SEND_SCR', } class Decoder(srd.Decoder): api_version = 1 id = 'sdcard_spi' name = 'SD card (SPI mode)' longname = 'Secure Digital card (SPI mode)' desc = 'Secure Digital card (SPI mode) low-level protocol.' license = 'gplv2+' inputs = ['spi'] outputs = ['sdcard_spi'] probes = [] optional_probes = [] options = {} annotations = [ ['text', 'Human-readable text'], ['warnings', 'Human-readable warnings'], ] def __init__(self, **kwargs): self.state = 'IDLE' self.samplenum = 0 self.cmd_ss, self.cmd_es = 0, 0 self.cmd_token = [] self.is_acmd = False # Indicates CMD vs. ACMD self.blocklen = 0 self.read_buf = [] def start(self): # self.out_python = self.register(srd.OUTPUT_PYTHON) self.out_ann = self.register(srd.OUTPUT_ANN) def putx(self, data): self.put(self.cmd_ss, self.cmd_es, self.out_ann, data) def handle_command_token(self, mosi, miso): # Command tokens (6 bytes) are sent (MSB-first) by the host. # # Format: # - CMD[47:47]: Start bit (always 0) # - CMD[46:46]: Transmitter bit (1 == host) # - CMD[45:40]: Command index (BCD; valid: 0-63) # - CMD[39:08]: Argument # - CMD[07:01]: CRC7 # - CMD[00:00]: End bit (always 1) self.cmd_token.append(mosi) # TODO: Record MISO too? # All command tokens are 6 bytes long. if len(self.cmd_token) < 6: return # Received all 6 bytes of the command token. Now decode it. t = self.cmd_token # CMD or ACMD? s = 'ACMD' if self.is_acmd else 'CMD' # TODO self.put(0, 0, self.out_ann, [0, [s + ': %02x %02x %02x %02x %02x %02x' % tuple(t)]]) # Start bit self.startbit = (t[0] & (1 << 7)) >> 7 self.put(0, 0, self.out_ann, [0, ['Start bit: %d' % self.startbit]]) if self.startbit != 0: # TODO self.put(0, 0, self.out_ann, [1, ['Warning: Start bit != 0']]) # Transmitter bit self.transmitterbit = (t[0] & (1 << 6)) >> 6 self.put(0, 0, self.out_ann, [0, ['Transmitter bit: %d' % self.transmitterbit]]) if self.transmitterbit != 0: # TODO self.put(0, 0, self.out_ann, [1, ['Warning: Transmitter bit != 1']]) # Command index cmd = self.cmd_index = t[0] & 0x3f # TODO self.put(0, 0, self.out_ann, [0, ['Command: %s%d (%s)' % (s, cmd, cmd_name[cmd])]]) # Argument self.arg = (t[1] << 24) | (t[2] << 16) | (t[3] << 8) | t[4] self.put(0, 0, self.out_ann, [0, ['Argument: 0x%04x' % self.arg]]) # TODO: Sanity check on argument? Must be per-cmd? # CRC # TODO: Check CRC. self.crc = t[5] >> 1 self.put(0, 0, self.out_ann, [0, ['CRC: 0x%01x' % self.crc]]) # End bit self.endbit = t[5] & (1 << 0) self.put(0, 0, self.out_ann, [0, ['End bit: %d' % self.endbit]]) if self.endbit != 1: # TODO self.put(0, 0, self.out_ann, [1, ['Warning: End bit != 1']]) # Handle command. if cmd in (0, 1, 9, 16, 17, 41, 49, 55, 59): self.state = 'HANDLE CMD%d' % cmd # ... if self.is_acmd and cmd != 55: self.is_acmd = False self.cmd_token = [] def handle_cmd0(self, ): # CMD0: GO_IDLE_STATE # TODO self.put(0, 0, self.out_ann, [0, ['CMD0: Card reset / idle state']]) self.state = 'GET RESPONSE R1' def handle_cmd1(self): # CMD1: SEND_OP_COND # TODO hcs = (self.arg & (1 << 30)) >> 30 self.put(0, 0, self.out_ann, [0, ['HCS bit = %d' % hcs]]) self.state = 'GET RESPONSE R1' def handle_cmd9(self): # CMD9: SEND_CSD (128 bits / 16 bytes) self.read_buf.append(self.miso) # FIXME ### if len(self.read_buf) < 16: if len(self.read_buf) < 16 + 4: return self.read_buf = self.read_buf[4:] ### TODO: Document or redo. self.put(0, 0, self.out_ann, [0, ['CSD: %s' % self.read_buf]]) # TODO: Decode all bits. self.read_buf = [] ### self.state = 'GET RESPONSE R1' self.state = 'IDLE' def handle_cmd10(self): # CMD10: SEND_CID (128 bits / 16 bytes) self.read_buf.append(self.miso) if len(self.read_buf) < 16: return self.put(0, 0, self.out_ann, [0, ['CID: %s' % self.read_buf]]) # TODO: Decode all bits. self.read_buf = [] self.state = 'GET RESPONSE R1' def handle_cmd16(self): # CMD16: SET_BLOCKLEN self.blocklen = self.arg # TODO # TODO: Sanity check on block length. self.put(0, 0, self.out_ann, [0, ['Block length: %d' % self.blocklen]]) self.state = 'GET RESPONSE R1' def handle_cmd17(self): # CMD17: READ_SINGLE_BLOCK self.read_buf.append(self.miso) if len(self.read_buf) == 1: self.put(0, 0, self.out_ann, [0, ['Read block at address: 0x%04x' % self.arg]]) if len(self.read_buf) < self.blocklen + 2: # FIXME return self.read_buf = self.read_buf[2:] # FIXME self.put(0, 0, self.out_ann, [0, ['Block data: %s' % self.read_buf]]) self.read_buf = [] self.state = 'GET RESPONSE R1' def handle_cmd41(self): # ACMD41: SD_SEND_OP_COND self.state = 'GET RESPONSE R1' def handle_cmd49(self): self.state = 'GET RESPONSE R1' def handle_cmd55(self): # CMD55: APP_CMD self.is_acmd = True self.state = 'GET RESPONSE R1' def handle_cmd59(self): # CMD59: CRC_ON_OFF crc_on_off = self.arg & (1 << 0) s = 'on' if crc_on_off == 1 else 'off' self.put(0, 0, self.out_ann, [0, ['SD card CRC option: %s' % s]]) self.state = 'GET RESPONSE R1' def handle_cid_register(self): # Card Identification (CID) register, 128bits cid = self.cid # Manufacturer ID: CID[127:120] (8 bits) mid = cid[15] # OEM/Application ID: CID[119:104] (16 bits) oid = (cid[14] << 8) | cid[13] # Product name: CID[103:64] (40 bits) pnm = 0 for i in range(12, 8 - 1, -1): pnm <<= 8 pnm |= cid[i] # Product revision: CID[63:56] (8 bits) prv = cid[7] # Product serial number: CID[55:24] (32 bits) psn = 0 for i in range(6, 3 - 1, -1): psn <<= 8 psn |= cid[i] # RESERVED: CID[23:20] (4 bits) # Manufacturing date: CID[19:8] (12 bits) # TODO # CRC7 checksum: CID[7:1] (7 bits) # TODO # Not used, always 1: CID[0:0] (1 bit) # TODO def handle_response_r1(self, res): # The R1 response token format (1 byte). # Sent by the card after every command except for SEND_STATUS. self.put(0, 0, self.out_ann, [0, ['R1: 0x%02x' % res]]) # TODO: Configurable whether all bits are decoded. # 'In idle state' bit s = '' if (res & (1 << 0)) else 'not ' self.put(0, 0, self.out_ann, [0, ['Card is %sin idle state' % s]]) # 'Erase reset' bit s = '' if (res & (1 << 1)) else 'not ' self.put(0, 0, self.out_ann, [0, ['Erase sequence %scleared' % s]]) # 'Illegal command' bit s = 'I' if (res & (1 << 2)) else 'No i' self.put(0, 0, self.out_ann, [0, ['%sllegal command detected' % s]]) # 'Communication CRC error' bit s = 'failed' if (res & (1 << 3)) else 'was successful' self.put(0, 0, self.out_ann, [0, ['CRC check of last command %s' % s]]) # 'Erase sequence error' bit s = 'E' if (res & (1 << 4)) else 'No e' self.put(0, 0, self.out_ann, [0, ['%srror in the sequence of erase commands' % s]]) # 'Address error' bit s = 'M' if (res & (1 << 4)) else 'No m' self.put(0, 0, self.out_ann, [0, ['%sisaligned address used in command' % s]]) # 'Parameter error' bit s = '' if (res & (1 << 4)) else 'not ' self.put(0, 0, self.out_ann, [0, ['Command argument %soutside allowed range' % s]]) self.state = 'IDLE' def handle_response_r1b(self, res): # TODO pass def handle_response_r2(self, res): # TODO pass def handle_response_r3(self, res): # TODO pass # Note: Response token formats R4 and R5 are reserved for SDIO. # TODO: R6? def handle_response_r7(self, res): # TODO pass def decode(self, ss, es, data): ptype, mosi, miso = data # For now, ignore non-data packets. if ptype != 'DATA': return self.put(0, 0, self.out_ann, [0, ['0x%02x 0x%02x' % (mosi, miso)]]) # State machine. if self.state == 'IDLE': # Ignore stray 0xff bytes, some devices seem to send those!? if mosi == 0xff: # TODO? return self.state = 'GET COMMAND TOKEN' self.handle_command_token(mosi, miso) elif self.state == 'GET COMMAND TOKEN': self.handle_command_token(mosi, miso) elif self.state.startswith('HANDLE CMD'): self.miso, self.mosi = miso, mosi # Call the respective handler method for the command. s = 'handle_cmd%s' % self.state[10:].lower() handle_cmd = getattr(self, s) handle_cmd() elif self.state.startswith('GET RESPONSE'): # Ignore stray 0xff bytes, some devices seem to send those!? if miso == 0xff: # TODO? return # Call the respective handler method for the response. s = 'handle_response_%s' % self.state[13:].lower() # self.put(0, 0, self.out_ann, [0, [s]]) # TODO handle_response = getattr(self, s) handle_response(miso) self.state = 'IDLE' else: raise Exception('Invalid state: %s' % self.state)