## ## This file is part of the libsigrokdecode project. ## ## Copyright (C) 2015 Uwe Hermann ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ## ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with this program; if not, write to the Free Software ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ## import sigrokdecode as srd from common.sdcard import (cmd_names, acmd_names, accepted_voltages, card_status, sd_status) class Decoder(srd.Decoder): api_version = 2 id = 'sdcard_sd' name = 'SD card (SD mode)' longname = 'Secure Digital card (SD mode)' desc = 'Secure Digital card (SD mode) low-level protocol.' license = 'gplv2+' inputs = ['logic'] outputs = ['sdcard_sd'] channels = ( {'id': 'cmd', 'name': 'CMD', 'desc': 'Command'}, {'id': 'clk', 'name': 'CLK', 'desc': 'Clock'}, ) optional_channels = ( {'id': 'dat0', 'name': 'DAT0', 'desc': 'Data pin 0'}, {'id': 'dat1', 'name': 'DAT1', 'desc': 'Data pin 1'}, {'id': 'dat2', 'name': 'DAT2', 'desc': 'Data pin 2'}, {'id': 'dat3', 'name': 'DAT3', 'desc': 'Data pin 3'}, ) annotations = \ tuple(('cmd%d' % i, 'CMD%d' % i) for i in range(64)) + \ tuple(('acmd%d' % i, 'ACMD%d' % i) for i in range(64)) + ( \ ('bits', 'Bits'), ('field-start', 'Start bit'), ('field-transmission', 'Transmission bit'), ('field-cmd', 'Command'), ('field-arg', 'Argument'), ('field-crc', 'CRC'), ('field-end', 'End bit'), ('decoded-bits', 'Decoded bits'), ('decoded-fields', 'Decoded fields'), ) annotation_rows = ( ('raw-bits', 'Raw bits', (128,)), ('decoded-bits', 'Decoded bits', (135,)), ('decoded-fields', 'Decoded fields', (136,)), ('fields', 'Fields', tuple(range(129, 135))), ('cmd', 'Commands', tuple(range(128))), ) def __init__(self): self.state = 'GET COMMAND TOKEN' self.token = [] self.oldpins = None self.oldclk = 0 self.is_acmd = False # Indicates CMD vs. ACMD self.cmd = None self.arg = None def start(self): self.out_ann = self.register(srd.OUTPUT_ANN) def putbit(self, b, data): self.put(self.token[b][0], self.token[b][1], self.out_ann, [135, data]) def putt(self, data): self.put(self.token[0][0], self.token[47][1], self.out_ann, data) def putt2(self, data): self.put(self.token[47][0], self.token[0][1], self.out_ann, data) def putf(self, s, e, data): self.put(self.token[s][0], self.token[e][1], self.out_ann, data) def puta(self, s, e, data): self.put(self.token[47 - 8 - e][0], self.token[47 - 8 - s][1], self.out_ann, data) def putc(self, cmd, desc): self.putt([cmd, ['%s: %s' % (self.cmd_str, desc), self.cmd_str, self.cmd_str.split(' ')[0]]]) def putr(self, cmd, desc): self.putt([cmd, ['Reply: %s' % desc]]) def putr2(self, cmd, desc): self.putt2([cmd, ['Reply: %s' % desc]]) def reset(self): self.cmd, self.arg = None, None self.token, self.state = [], 'GET COMMAND TOKEN' def cmd_name(self, cmd): c = acmd_names if self.is_acmd else cmd_names return c.get(cmd, 'Unknown') def get_token_bits(self, cmd, n): # Get a bit, return True if we already got 'n' bits, False otherwise. self.token.append([self.samplenum, self.samplenum, cmd]) if len(self.token) > 0: self.token[len(self.token) - 2][1] = self.samplenum if len(self.token) < n: return False self.token[n - 1][1] += self.token[n - 1][0] - self.token[n - 2][0] return True def handle_common_token_fields(self): s = self.token # Annotations for each individual bit. for bit in range(len(self.token)): self.putf(bit, bit, [128, ['%d' % s[bit][2]]]) # CMD[47:47]: Start bit (always 0) self.putf(0, 0, [129, ['Start bit', 'Start', 'S']]) # CMD[46:46]: Transmission bit (1 == host) t = 'host' if s[1][2] == 1 else 'card' self.putf(1, 1, [130, ['Transmission: ' + t, 'T: ' + t, 'T']]) # CMD[45:40]: Command index (BCD; valid: 0-63) self.cmd = int('0b' + ''.join([str(s[i][2]) for i in range(2, 8)]), 2) c = '%s (%d)' % (self.cmd_name(self.cmd), self.cmd) self.putf(2, 7, [131, ['Command: ' + c, 'Cmd: ' + c, 'CMD%d' % self.cmd, 'Cmd', 'C']]) # CMD[39:08]: Argument self.putf(8, 39, [132, ['Argument', 'Arg', 'A']]) # CMD[07:01]: CRC7 self.crc = int('0b' + ''.join([str(s[i][2]) for i in range(40, 47)]), 2) self.putf(40, 46, [133, ['CRC: 0x%x' % self.crc, 'CRC', 'C']]) # CMD[00:00]: End bit (always 1) self.putf(47, 47, [134, ['End bit', 'End', 'E']]) def get_command_token(self, cmd): # Command tokens (48 bits) are sent serially (MSB-first) by the host # (over the CMD line), either to one SD card or to multiple ones. # # Format: # - Bits[47:47]: Start bit (always 0) # - Bits[46:46]: Transmission bit (1 == host) # - Bits[45:40]: Command index (BCD; valid: 0-63) # - Bits[39:08]: Argument # - Bits[07:01]: CRC7 # - Bits[00:00]: End bit (always 1) if not self.get_token_bits(cmd, 48): return self.handle_common_token_fields() # Handle command. s = 'ACMD' if self.is_acmd else 'CMD' self.cmd_str = '%s%d (%s)' % (s, self.cmd, self.cmd_name(self.cmd)) if self.cmd in (0, 2, 3, 4, 6, 7, 8, 9, 10, 13, 41, 51, 55): self.state = 'HANDLE CMD%d' % self.cmd else: self.state = 'HANDLE CMD999' self.putc(self.cmd, '%s%d' % (s, self.cmd)) def handle_cmd0(self): # CMD0 (GO_IDLE_STATE) -> no response self.puta(0, 31, [136, ['Stuff bits', 'Stuff', 'SB', 'S']]) self.putc(0, 'Reset all SD cards') self.token, self.state = [], 'GET COMMAND TOKEN' def handle_cmd2(self): # CMD2 (ALL_SEND_CID) -> R2 self.puta(0, 31, [136, ['Stuff bits', 'Stuff', 'SB', 'S']]) self.putc(2, 'Ask card for CID number') self.token, self.state = [], 'GET RESPONSE R2' def handle_cmd3(self): # CMD3 (SEND_RELATIVE_ADDR) -> R6 self.puta(0, 31, [136, ['Stuff bits', 'Stuff', 'SB', 'S']]) self.putc(3, 'Ask card for new relative card address (RCA)') self.token, self.state = [], 'GET RESPONSE R6' def handle_cmd6(self): # CMD6 (SWITCH_FUNC) -> R1 self.putc(6, 'Switch/check card function') self.token, self.state = [], 'GET RESPONSE R1' def handle_cmd7(self): # CMD7 (SELECT/DESELECT_CARD) -> R1b self.putc(7, 'Select / deselect card') self.token, self.state = [], 'GET RESPONSE R6' def handle_cmd8(self): # CMD8 (SEND_IF_COND) -> R7 self.puta(12, 31, [136, ['Reserved', 'Res', 'R']]) self.puta(8, 11, [136, ['Supply voltage', 'Voltage', 'VHS', 'V']]) self.puta(0, 7, [136, ['Check pattern', 'Check pat', 'Check', 'C']]) self.putc(0, 'Send interface condition to card') self.token, self.state = [], 'GET RESPONSE R7' # TODO: Handle case when card doesn't reply with R7 (no reply at all). def handle_cmd9(self): # CMD9 (SEND_CSD) -> R2 self.puta(16, 31, [136, ['RCA', 'R']]) self.puta(0, 15, [136, ['Stuff bits', 'Stuff', 'SB', 'S']]) self.putc(9, 'Send card-specific data (CSD)') self.token, self.state = [], 'GET RESPONSE R2' def handle_cmd10(self): # CMD10 (SEND_CID) -> R2 self.puta(16, 31, [136, ['RCA', 'R']]) self.puta(0, 15, [136, ['Stuff bits', 'Stuff', 'SB', 'S']]) self.putc(9, 'Send card identification data (CID)') self.token, self.state = [], 'GET RESPONSE R2' def handle_cmd13(self): # CMD13 (SEND_STATUS) -> R1 self.puta(16, 31, [136, ['RCA', 'R']]) self.puta(0, 15, [136, ['Stuff bits', 'Stuff', 'SB', 'S']]) self.putc(13, 'Send card status register') self.token, self.state = [], 'GET RESPONSE R1' def handle_cmd16(self): # CMD16 (SET_BLOCKLEN) -> R1 self.blocklen = self.arg self.puta(0, 31, [136, ['Block length', 'Blocklen', 'BL', 'B']]) self.putc(16, 'Set the block length to %d bytes' % self.blocklen) self.token, self.state = [], 'GET RESPONSE R1' def handle_cmd55(self): # CMD55 (APP_CMD) -> R1 self.puta(16, 31, [136, ['RCA', 'R']]) self.puta(0, 15, [136, ['Stuff bits', 'Stuff', 'SB', 'S']]) self.putc(55, 'Next command is an application-specific command') self.is_acmd = True self.token, self.state = [], 'GET RESPONSE R1' def handle_acmd6(self): # ACMD6 (SET_BUS_WIDTH) -> R1 self.putc(64 + 6, 'Read SD config register (SCR)') self.token, self.state = [], 'GET RESPONSE R1' def handle_acmd13(self): # ACMD13 (SD_STATUS) -> R1 self.puta(0, 31, [136, ['Stuff bits', 'Stuff', 'SB', 'S']]) self.putc(64 + 13, 'Set SD status') self.token, self.state = [], 'GET RESPONSE R1' def handle_acmd41(self): # ACMD41 (SD_SEND_OP_COND) -> R3 self.puta(0, 23, [136, ['VDD voltage window', 'VDD volt', 'VDD', 'V']]) self.puta(24, 24, [136, ['S18R']]) self.puta(25, 27, [136, ['Reserved', 'Res', 'R']]) self.puta(28, 28, [136, ['XPC']]) self.puta(29, 29, [136, ['Reserved for eSD', 'Reserved', 'Res', 'R']]) self.puta(30, 30, [136, ['Host capacity support info', 'Host capacity', 'HCS', 'H']]) self.puta(31, 31, [136, ['Reserved', 'Res', 'R']]) self.putc(64 + 41, 'Send HCS info and activate the card init process') self.token, self.state = [], 'GET RESPONSE R3' def handle_acmd51(self): # ACMD51 (SEND_SCR) -> R1 self.putc(64 + 51, 'Read SD config register (SCR)') self.token, self.state = [], 'GET RESPONSE R1' def handle_cmd999(self): self.token, self.state = [], 'GET RESPONSE R1' def handle_acmd999(self): self.token, self.state = [], 'GET RESPONSE R1' # Response tokens can have one of four formats (depends on content). # They can have a total length of 48 or 136 bits. # They're sent serially (MSB-first) by the card that the host # addressed previously, or (synchronously) by all connected cards. def handle_response_r1(self, cmd): # R1: Normal response command # - Bits[47:47]: Start bit (always 0) # - Bits[46:46]: Transmission bit (0 == card) # - Bits[45:40]: Command index (BCD; valid: 0-63) # - Bits[39:08]: Card status # - Bits[07:01]: CRC7 # - Bits[00:00]: End bit (always 1) if not self.get_token_bits(cmd, 48): return self.handle_common_token_fields() self.putr(55, 'R1') self.puta(0, 31, [136, ['Card status', 'Status', 'S']]) for i in range(32): self.putbit(8 + i, [card_status[31 - i]]) self.token, self.state = [], 'GET COMMAND TOKEN' def handle_response_r1b(self, cmd): # R1b: Same as R1 with an optional busy signal (on the data line) if not self.get_token_bits(cmd, 48): return self.handle_common_token_fields() self.puta(0, 31, [136, ['Card status', 'Status', 'S']]) self.putr(55, 'R1b') self.token, self.state = [], 'GET COMMAND TOKEN' def handle_response_r2(self, cmd): # R2: CID/CSD register # - Bits[135:135]: Start bit (always 0) # - Bits[134:134]: Transmission bit (0 == card) # - Bits[133:128]: Reserved (always 0b111111) # - Bits[127:001]: CID or CSD register including internal CRC7 # - Bits[000:000]: End bit (always 1) if not self.get_token_bits(cmd, 136): return # Annotations for each individual bit. for bit in range(len(self.token)): self.putf(bit, bit, [128, ['%d' % self.token[bit][2]]]) self.putf(0, 0, [129, ['Start bit', 'Start', 'S']]) t = 'host' if self.token[1][2] == 1 else 'card' self.putf(1, 1, [130, ['Transmission: ' + t, 'T: ' + t, 'T']]) self.putf(2, 7, [131, ['Reserved', 'Res', 'R']]) self.putf(8, 134, [132, ['Argument', 'Arg', 'A']]) self.putf(135, 135, [134, ['End bit', 'End', 'E']]) self.putf(8, 134, [136, ['CID/CSD register', 'CID/CSD', 'C']]) self.putf(0, 135, [55, ['R2']]) self.token, self.state = [], 'GET COMMAND TOKEN' def handle_response_r3(self, cmd): # R3: OCR register # - Bits[47:47]: Start bit (always 0) # - Bits[46:46]: Transmission bit (0 == card) # - Bits[45:40]: Reserved (always 0b111111) # - Bits[39:08]: OCR register # - Bits[07:01]: Reserved (always 0b111111) # - Bits[00:00]: End bit (always 1) if not self.get_token_bits(cmd, 48): return self.putr(55, 'R3') # Annotations for each individual bit. for bit in range(len(self.token)): self.putf(bit, bit, [128, ['%d' % self.token[bit][2]]]) self.putf(0, 0, [129, ['Start bit', 'Start', 'S']]) t = 'host' if self.token[1][2] == 1 else 'card' self.putf(1, 1, [130, ['Transmission: ' + t, 'T: ' + t, 'T']]) self.putf(2, 7, [131, ['Reserved', 'Res', 'R']]) self.putf(8, 39, [132, ['Argument', 'Arg', 'A']]) self.putf(40, 46, [133, ['Reserved', 'Res', 'R']]) self.putf(47, 47, [134, ['End bit', 'End', 'E']]) self.puta(0, 31, [136, ['OCR register', 'OCR reg', 'OCR', 'O']]) self.token, self.state = [], 'GET COMMAND TOKEN' def handle_response_r6(self, cmd): # R6: Published RCA response # - Bits[47:47]: Start bit (always 0) # - Bits[46:46]: Transmission bit (0 == card) # - Bits[45:40]: Command index (always 0b000011) # - Bits[39:24]: Argument[31:16]: New published RCA of the card # - Bits[23:08]: Argument[15:0]: Card status bits # - Bits[07:01]: CRC7 # - Bits[00:00]: End bit (always 1) if not self.get_token_bits(cmd, 48): return self.handle_common_token_fields() self.puta(0, 15, [136, ['Card status bits', 'Status', 'S']]) self.puta(16, 31, [136, ['Relative card address', 'RCA', 'R']]) self.putr(55, 'R6') self.token, self.state = [], 'GET COMMAND TOKEN' def handle_response_r7(self, cmd): # R7: Card interface condition # - Bits[47:47]: Start bit (always 0) # - Bits[46:46]: Transmission bit (0 == card) # - Bits[45:40]: Command index (always 0b001000) # - Bits[39:20]: Reserved bits (all-zero) # - Bits[19:16]: Voltage accepted # - Bits[15:08]: Echo-back of check pattern # - Bits[07:01]: CRC7 # - Bits[00:00]: End bit (always 1) if not self.get_token_bits(cmd, 48): return self.handle_common_token_fields() self.putr(55, 'R7') # Arg[31:12]: Reserved bits (all-zero) self.puta(12, 31, [136, ['Reserved', 'Res', 'R']]) # Arg[11:08]: Voltage accepted v = ''.join(str(i[2]) for i in self.token[28:32]) av = accepted_voltages.get(int('0b' + v, 2), 'Unknown') self.puta(8, 11, [136, ['Voltage accepted: ' + av, 'Voltage', 'Volt', 'V']]) # Arg[07:00]: Echo-back of check pattern self.puta(0, 7, [136, ['Echo-back of check pattern', 'Echo', 'E']]) self.token, self.state = [], 'GET COMMAND TOKEN' def decode(self, ss, es, data): for (self.samplenum, pins) in data: # Ignore identical samples early on (for performance reasons). if self.oldpins == pins: continue self.oldpins, (cmd, clk, dat0, dat1, dat2, dat3) = pins, pins # Wait for a rising CLK edge. if not (self.oldclk == 0 and clk == 1): self.oldclk = clk continue self.oldclk = clk # State machine. if self.state == 'GET COMMAND TOKEN': if len(self.token) == 0: # Wait for start bit (CMD = 0). if cmd != 0: continue self.get_command_token(cmd) elif self.state.startswith('HANDLE CMD'): # Call the respective handler method for the command. a, cmdstr = 'a' if self.is_acmd else '', self.state[10:].lower() handle_cmd = getattr(self, 'handle_%scmd%s' % (a, cmdstr)) handle_cmd() # Leave ACMD mode again after the first command after CMD55. if self.is_acmd and cmdstr not in ('55', '63'): self.is_acmd = False elif self.state.startswith('GET RESPONSE'): if len(self.token) == 0: # Wait for start bit (CMD = 0). if cmd != 0: continue # Call the respective handler method for the response. s = 'handle_response_%s' % self.state[13:].lower() handle_response = getattr(self, s) handle_response(cmd)