## ## This file is part of the libsigrokdecode project. ## ## Copyright (C) 2012-2013 Uwe Hermann ## Copyright (C) 2019 Stephan Thiele ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ## ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## ## You should have received a copy of the GNU General Public License ## along with this program; if not, see . ## import sigrokdecode as srd class SamplerateError(Exception): pass def dlc2len(dlc): return [0, 1, 2, 3, 4, 5, 6, 7, 8, 12, 16, 20, 24, 32, 48, 64][dlc] class Decoder(srd.Decoder): api_version = 3 id = 'can' name = 'CAN' longname = 'Controller Area Network' desc = 'Field bus protocol for distributed realtime control.' license = 'gplv2+' inputs = ['logic'] outputs = ['can'] tags = ['Automotive'] channels = ( {'id': 'can_rx', 'name': 'CAN RX', 'desc': 'CAN bus line'}, ) options = ( {'id': 'nominal_bitrate', 'desc': 'Nominal bitrate (bits/s)', 'default': 1000000}, {'id': 'fast_bitrate', 'desc': 'Fast bitrate (bits/s)', 'default': 2000000}, {'id': 'sample_point', 'desc': 'Sample point (%)', 'default': 70.0}, ) annotations = ( ('data', 'Payload data'), ('sof', 'Start of frame'), ('eof', 'End of frame'), ('id', 'Identifier'), ('ext-id', 'Extended identifier'), ('full-id', 'Full identifier'), ('ide', 'Identifier extension bit'), ('reserved-bit', 'Reserved bit 0 and 1'), ('rtr', 'Remote transmission request'), ('srr', 'Substitute remote request'), ('dlc', 'Data length count'), ('crc-sequence', 'CRC sequence'), ('crc-delimiter', 'CRC delimiter'), ('ack-slot', 'ACK slot'), ('ack-delimiter', 'ACK delimiter'), ('stuff-bit', 'Stuff bit'), ('warning', 'Warning'), ('bit', 'Bit'), ) annotation_rows = ( ('bits', 'Bits', (15, 17)), ('fields', 'Fields', tuple(range(15))), ('warnings', 'Warnings', (16,)), ) def __init__(self): self.reset() def reset(self): self.samplerate = None self.reset_variables() def start(self): self.out_ann = self.register(srd.OUTPUT_ANN) self.out_python = self.register(srd.OUTPUT_PYTHON) def set_bit_rate(self, bitrate): self.bit_width = float(self.samplerate) / float(bitrate) self.sample_point = (self.bit_width / 100.0) * self.options['sample_point'] def set_nominal_bitrate(self): self.set_bit_rate(self.options['nominal_bitrate']) def set_fast_bitrate(self): self.set_bit_rate(self.options['fast_bitrate']) def metadata(self, key, value): if key == srd.SRD_CONF_SAMPLERATE: self.samplerate = value self.bit_width = float(self.samplerate) / float(self.options['nominal_bitrate']) self.sample_point = (self.bit_width / 100.0) * self.options['sample_point'] # Generic helper for CAN bit annotations. def putg(self, ss, es, data): left, right = int(self.sample_point), int(self.bit_width - self.sample_point) self.put(ss - left, es + right, self.out_ann, data) # Single-CAN-bit annotation using the current samplenum. def putx(self, data): self.putg(self.samplenum, self.samplenum, data) # Single-CAN-bit annotation using the samplenum of CAN bit 12. def put12(self, data): self.putg(self.ss_bit12, self.ss_bit12, data) # Single-CAN-bit annotation using the samplenum of CAN bit 32. def put32(self, data): self.putg(self.ss_bit32, self.ss_bit32, data) # Multi-CAN-bit annotation from self.ss_block to current samplenum. def putb(self, data): self.putg(self.ss_block, self.samplenum, data) def putpy(self, data): self.put(self.ss_packet, self.es_packet, self.out_python, data) def reset_variables(self): self.state = 'IDLE' self.sof = self.frame_type = self.dlc = None self.rawbits = [] # All bits, including stuff bits self.bits = [] # Only actual CAN frame bits (no stuff bits) self.curbit = 0 # Current bit of CAN frame (bit 0 == SOF) self.last_databit = 999 # Positive value that bitnum+x will never match self.ss_block = None self.ss_bit12 = None self.ss_bit32 = None self.ss_databytebits = [] self.frame_bytes = [] self.rtr_type = None self.fd = False self.rtr = None # Poor man's clock synchronization. Use signal edges which change to # dominant state in rather simple ways. This naive approach is neither # aware of the SYNC phase's width nor the specific location of the edge, # but improves the decoder's reliability when the input signal's bitrate # does not exactly match the nominal rate. def dom_edge_seen(self, force = False): self.dom_edge_snum = self.samplenum self.dom_edge_bcount = self.curbit # Determine the position of the next desired bit's sample point. def get_sample_point(self, bitnum): samplenum = self.dom_edge_snum samplenum += self.bit_width * (bitnum - self.dom_edge_bcount) samplenum += self.sample_point return int(samplenum) def is_stuff_bit(self): # CAN uses NRZ encoding and bit stuffing. # After 5 identical bits, a stuff bit of opposite value is added. # But not in the CRC delimiter, ACK, and end of frame fields. if len(self.bits) > self.last_databit + 17: return False last_6_bits = self.rawbits[-6:] if last_6_bits not in ([0, 0, 0, 0, 0, 1], [1, 1, 1, 1, 1, 0]): return False # Stuff bit. Keep it in self.rawbits, but drop it from self.bits. self.bits.pop() # Drop last bit. return True def is_valid_crc(self, crc_bits): return True # TODO def decode_error_frame(self, bits): pass # TODO def decode_overload_frame(self, bits): pass # TODO # Both standard and extended frames end with CRC, CRC delimiter, ACK, # ACK delimiter, and EOF fields. Handle them in a common function. # Returns True if the frame ended (EOF), False otherwise. def decode_frame_end(self, can_rx, bitnum): # Remember start of CRC sequence (see below). if bitnum == (self.last_databit + 1): self.ss_block = self.samplenum if self.fd: if dlc2len(self.dlc) < 16: self.crc_len = 27 # 17 + SBC + stuff bits else: self.crc_len = 32 # 21 + SBC + stuff bits else: self.crc_len = 15 # CRC sequence (15 bits, 17 bits or 21 bits) elif bitnum == (self.last_databit + self.crc_len): if self.fd: if dlc2len(self.dlc) < 16: crc_type = "CRC-17" else: crc_type = "CRC-21" else: crc_type = "CRC-15" x = self.last_databit + 1 crc_bits = self.bits[x:x + self.crc_len + 1] self.crc = int(''.join(str(d) for d in crc_bits), 2) self.putb([11, ['%s sequence: 0x%04x' % (crc_type, self.crc), '%s: 0x%04x' % (crc_type, self.crc), '%s' % crc_type]]) if not self.is_valid_crc(crc_bits): self.putb([16, ['CRC is invalid']]) # CRC delimiter bit (recessive) elif bitnum == (self.last_databit + self.crc_len + 1): self.putx([12, ['CRC delimiter: %d' % can_rx, 'CRC d: %d' % can_rx, 'CRC d']]) if can_rx != 1: self.putx([16, ['CRC delimiter must be a recessive bit']]) if self.fd: self.set_nominal_bitrate() # ACK slot bit (dominant: ACK, recessive: NACK) elif bitnum == (self.last_databit + self.crc_len + 2): ack = 'ACK' if can_rx == 0 else 'NACK' self.putx([13, ['ACK slot: %s' % ack, 'ACK s: %s' % ack, 'ACK s']]) # ACK delimiter bit (recessive) elif bitnum == (self.last_databit + self.crc_len + 3): self.putx([14, ['ACK delimiter: %d' % can_rx, 'ACK d: %d' % can_rx, 'ACK d']]) if can_rx != 1: self.putx([16, ['ACK delimiter must be a recessive bit']]) # Remember start of EOF (see below). elif bitnum == (self.last_databit + self.crc_len + 4): self.ss_block = self.samplenum # End of frame (EOF), 7 recessive bits elif bitnum == (self.last_databit + self.crc_len + 10): self.putb([2, ['End of frame', 'EOF', 'E']]) if self.rawbits[-7:] != [1, 1, 1, 1, 1, 1, 1]: self.putb([16, ['End of frame (EOF) must be 7 recessive bits']]) self.es_packet = self.samplenum py_data = tuple([self.frame_type, self.fullid, self.rtr_type, self.dlc, self.frame_bytes]) self.putpy(py_data) self.reset_variables() return True return False # Returns True if the frame ended (EOF), False otherwise. def decode_standard_frame(self, can_rx, bitnum): # Bit 14: FDF (Flexible data format) # Has to be sent dominant when FD frame, has to be sent recessive # when classic CAN frame. if bitnum == 14: self.fd = True if can_rx else False if self.fd: self.putx([7, ['Flexible data format: %d' % can_rx, 'FDF: %d' % can_rx, 'FDF']]) else: self.putx([7, ['Reserved bit 0: %d' % can_rx, 'RB0: %d' % can_rx, 'RB0']]) if self.fd: # Bit 12: Substitute remote request (SRR) bit self.put12([8, ['Substitute remote request', 'SRR']]) self.dlc_start = 18 else: # Bit 12: Remote transmission request (RTR) bit # Data frame: dominant, remote frame: recessive # Remote frames do not contain a data field. rtr = 'remote' if self.bits[12] == 1 else 'data' self.put12([8, ['Remote transmission request: %s frame' % rtr, 'RTR: %s frame' % rtr, 'RTR']]) self.rtr_type = rtr self.dlc_start = 15 if bitnum == 15 and self.fd: self.putx([7, ['Reserved: %d' % can_rx, 'R0: %d' % can_rx, 'R0']]) if bitnum == 16 and self.fd: self.putx([7, ['Bit rate switch: %d' % can_rx, 'BRS: %d' % can_rx, 'BRS']]) if bitnum == 17 and self.fd: self.putx([7, ['Error state indicator: %d' % can_rx, 'ESI: %d' % can_rx, 'ESI']]) # Remember start of DLC (see below). elif bitnum == self.dlc_start: self.ss_block = self.samplenum # Bits 15-18: Data length code (DLC), in number of bytes (0-8). elif bitnum == self.dlc_start + 3: self.dlc = int(''.join(str(d) for d in self.bits[self.dlc_start:self.dlc_start + 4]), 2) self.putb([10, ['Data length code: %d' % self.dlc, 'DLC: %d' % self.dlc, 'DLC']]) self.last_databit = self.dlc_start + 3 + (dlc2len(self.dlc) * 8) if self.dlc > 8 and not self.fd: self.putb([16, ['Data length code (DLC) > 8 is not allowed']]) # Remember all databyte bits, except the very last one. elif bitnum in range(self.dlc_start + 4, self.last_databit): self.ss_databytebits.append(self.samplenum) # Bits 19-X: Data field (0-8 bytes, depending on DLC) # The bits within a data byte are transferred MSB-first. elif bitnum == self.last_databit: self.ss_databytebits.append(self.samplenum) # Last databyte bit. for i in range(dlc2len(self.dlc)): x = self.dlc_start + 4 + (8 * i) b = int(''.join(str(d) for d in self.bits[x:x + 8]), 2) self.frame_bytes.append(b) ss = self.ss_databytebits[i * 8] es = self.ss_databytebits[((i + 1) * 8) - 1] self.putg(ss, es, [0, ['Data byte %d: 0x%02x' % (i, b), 'DB %d: 0x%02x' % (i, b), 'DB']]) self.ss_databytebits = [] elif bitnum > self.last_databit: return self.decode_frame_end(can_rx, bitnum) return False # Returns True if the frame ended (EOF), False otherwise. def decode_extended_frame(self, can_rx, bitnum): # Remember start of EID (see below). if bitnum == 14: self.ss_block = self.samplenum self.fd = False self.dlc_start = 35 # Bits 14-31: Extended identifier (EID[17..0]) elif bitnum == 31: self.eid = int(''.join(str(d) for d in self.bits[14:]), 2) s = '%d (0x%x)' % (self.eid, self.eid) self.putb([4, ['Extended Identifier: %s' % s, 'Extended ID: %s' % s, 'Extended ID', 'EID']]) self.fullid = self.id << 18 | self.eid s = '%d (0x%x)' % (self.fullid, self.fullid) self.putb([5, ['Full Identifier: %s' % s, 'Full ID: %s' % s, 'Full ID', 'FID']]) # Bit 12: Substitute remote request (SRR) bit self.put12([9, ['Substitute remote request: %d' % self.bits[12], 'SRR: %d' % self.bits[12], 'SRR']]) # Bit 32: Remote transmission request (RTR) bit # Data frame: dominant, remote frame: recessive # Remote frames do not contain a data field. # Remember start of RTR (see below). if bitnum == 32: self.ss_bit32 = self.samplenum self.rtr = can_rx if not self.fd: rtr = 'remote' if can_rx == 1 else 'data' self.putx([8, ['Remote transmission request: %s frame' % rtr, 'RTR: %s frame' % rtr, 'RTR']]) self.rtr_type = rtr # Bit 33: RB1 (reserved bit) elif bitnum == 33: self.fd = True if can_rx else False if self.fd: self.dlc_start = 37 self.putx([7, ['Flexible data format: %d' % can_rx, 'FDF: %d' % can_rx, 'FDF']]) self.put32([7, ['Reserved bit 1: %d' % self.rtr, 'RB1: %d' % self.rtr, 'RB1']]) else: self.putx([7, ['Reserved bit 1: %d' % can_rx, 'RB1: %d' % can_rx, 'RB1']]) # Bit 34: RB0 (reserved bit) elif bitnum == 34: self.putx([7, ['Reserved bit 0: %d' % can_rx, 'RB0: %d' % can_rx, 'RB0']]) elif bitnum == 35 and self.fd: self.putx([7, ['Bit rate switch: %d' % can_rx, 'BRS: %d' % can_rx, 'BRS']]) elif bitnum == 36 and self.fd: self.putx([7, ['Error state indicator: %d' % can_rx, 'ESI: %d' % can_rx, 'ESI']]) # Remember start of DLC (see below). elif bitnum == self.dlc_start: self.ss_block = self.samplenum # Bits 35-38: Data length code (DLC), in number of bytes (0-8). elif bitnum == self.dlc_start + 3: self.dlc = int(''.join(str(d) for d in self.bits[self.dlc_start:self.dlc_start + 4]), 2) self.putb([10, ['Data length code: %d' % self.dlc, 'DLC: %d' % self.dlc, 'DLC']]) self.last_databit = self.dlc_start + 3 + (dlc2len(self.dlc) * 8) # Remember all databyte bits, except the very last one. elif bitnum in range(self.dlc_start + 4, self.last_databit): self.ss_databytebits.append(self.samplenum) # Bits 39-X: Data field (0-8 bytes, depending on DLC) # The bits within a data byte are transferred MSB-first. elif bitnum == self.last_databit: self.ss_databytebits.append(self.samplenum) # Last databyte bit. for i in range(dlc2len(self.dlc)): x = self.dlc_start + 4 + (8 * i) b = int(''.join(str(d) for d in self.bits[x:x + 8]), 2) self.frame_bytes.append(b) ss = self.ss_databytebits[i * 8] es = self.ss_databytebits[((i + 1) * 8) - 1] self.putg(ss, es, [0, ['Data byte %d: 0x%02x' % (i, b), 'DB %d: 0x%02x' % (i, b), 'DB']]) self.ss_databytebits = [] elif bitnum > self.last_databit: return self.decode_frame_end(can_rx, bitnum) return False def handle_bit(self, can_rx): self.rawbits.append(can_rx) self.bits.append(can_rx) # Get the index of the current CAN frame bit (without stuff bits). bitnum = len(self.bits) - 1 if self.fd and can_rx: if bitnum == 16 and self.frame_type == 'standard' \ or bitnum == 35 and self.frame_type == 'extended': self.dom_edge_seen(force=True) self.set_fast_bitrate() # If this is a stuff bit, remove it from self.bits and ignore it. if self.is_stuff_bit(): self.putx([15, [str(can_rx)]]) self.curbit += 1 # Increase self.curbit (bitnum is not affected). return else: self.putx([17, [str(can_rx)]]) # Bit 0: Start of frame (SOF) bit if bitnum == 0: self.ss_packet = self.samplenum self.putx([1, ['Start of frame', 'SOF', 'S']]) if can_rx != 0: self.putx([16, ['Start of frame (SOF) must be a dominant bit']]) # Remember start of ID (see below). elif bitnum == 1: self.ss_block = self.samplenum # Bits 1-11: Identifier (ID[10..0]) # The bits ID[10..4] must NOT be all recessive. elif bitnum == 11: self.id = int(''.join(str(d) for d in self.bits[1:]), 2) self.fullid = self.id s = '%d (0x%x)' % (self.id, self.id), self.putb([3, ['Identifier: %s' % s, 'ID: %s' % s, 'ID']]) if (self.id & 0x7f0) == 0x7f0: self.putb([16, ['Identifier bits 10..4 must not be all recessive']]) # RTR or SRR bit, depending on frame type (gets handled later). elif bitnum == 12: # self.putx([0, ['RTR/SRR: %d' % can_rx]]) # Debug only. self.ss_bit12 = self.samplenum # Bit 13: Identifier extension (IDE) bit # Standard frame: dominant, extended frame: recessive elif bitnum == 13: ide = self.frame_type = 'standard' if can_rx == 0 else 'extended' self.putx([6, ['Identifier extension bit: %s frame' % ide, 'IDE: %s frame' % ide, 'IDE']]) # Bits 14-X: Frame-type dependent, passed to the resp. handlers. elif bitnum >= 14: if self.frame_type == 'standard': done = self.decode_standard_frame(can_rx, bitnum) else: done = self.decode_extended_frame(can_rx, bitnum) # The handlers return True if a frame ended (EOF). if done: return # After a frame there are 3 intermission bits (recessive). # After these bits, the bus is considered free. self.curbit += 1 def decode(self): if not self.samplerate: raise SamplerateError('Cannot decode without samplerate.') while True: # State machine. if self.state == 'IDLE': # Wait for a dominant state (logic 0) on the bus. (can_rx,) = self.wait({0: 'l'}) self.sof = self.samplenum self.dom_edge_seen(force = True) self.state = 'GET BITS' elif self.state == 'GET BITS': # Wait until we're in the correct bit/sampling position. pos = self.get_sample_point(self.curbit) (can_rx,) = self.wait([{'skip': pos - self.samplenum}, {0: 'f'}]) if self.matched[1]: self.dom_edge_seen() if self.matched[0]: self.handle_bit(can_rx)