##
## This file is part of the libsigrokdecode project.
##
## Copyright (C) 2015 Petteri Aimonen <jpa@sigrok.mail.kapsi.fi>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

import sigrokdecode as srd
import subprocess
import re

# See ETMv3 Signal Protocol table 7-11: 'Encoding of Exception[8:0]'.
exc_names = [
    'No exception', 'IRQ1', 'IRQ2', 'IRQ3', 'IRQ4', 'IRQ5', 'IRQ6', 'IRQ7',
    'IRQ0', 'UsageFault', 'NMI', 'SVC', 'DebugMon', 'MemManage', 'PendSV',
    'SysTick', 'Reserved', 'Reset', 'BusFault', 'Reserved', 'Reserved'
]

for i in range(8, 496):
    exc_names.append('IRQ%d' % i)

def parse_varint(bytes):
    '''Parse an integer where the top bit is the continuation bit.
    Returns value and number of parsed bytes.'''
    v = 0
    for i, b in enumerate(bytes):
        v |= (b & 0x7F) << (i * 7)
        if b & 0x80 == 0:
            return v, i+1
    return v, len(bytes)

def parse_uint(bytes):
    '''Parse little-endian integer.'''
    v = 0
    for i, b in enumerate(bytes):
        v |= b << (i * 8)
    return v

def parse_exc_info(bytes):
    '''Parse exception information bytes from a branch packet.'''
    if len(bytes) < 1:
        return None

    excv, exclen = parse_varint(bytes)
    if bytes[exclen - 1] & 0x80 != 0x00:
        return None # Exception info not complete.

    if exclen == 2 and excv & (1 << 13):
        # Exception byte 1 was skipped, fix up the decoding.
        excv = (excv & 0x7F) | ((excv & 0x3F80) << 7)

    ns = excv & 1
    exc = ((excv >> 1) & 0x0F) | ((excv >> 7) & 0x1F0)
    cancel = (excv >> 5) & 1
    altisa = (excv >> 6) & 1
    hyp = (excv >> 12) & 1
    resume = (excv >> 14) & 0x0F
    return (ns, exc, cancel, altisa, hyp, resume)

def parse_branch_addr(bytes, ref_addr, cpu_state, branch_enc):
    '''Parse encoded branch address.
       Returns addr, addrlen, cpu_state, exc_info.
       Returns None if packet is not yet complete'''

    addr, addrlen = parse_varint(bytes)

    if bytes[addrlen-1] & 0x80 != 0x00:
        return None # Branch address not complete.

    addr_bits = 7 * addrlen

    have_exc_info = False
    if branch_enc == 'original':
        if addrlen == 5 and bytes[4] & 0x40:
            have_exc_info = True
    elif branch_enc == 'alternative':
        addr_bits -= 1 # Top bit of address indicates exc_info.
        if addrlen >= 2 and addr & (1 << addr_bits):
            have_exc_info = True
            addr &= ~(1 << addr_bits)

    exc_info = None
    if have_exc_info:
        exc_info = parse_exc_info(bytes[addrlen:])
        if exc_info is None:
            return None # Exception info not complete.

    if addrlen == 5:
        # Possible change in CPU state.
        if bytes[4] & 0xB8 == 0x08:
            cpu_state = 'arm'
        elif bytes[4] & 0xB0 == 0x10:
            cpu_state = 'thumb'
        elif bytes[4] & 0xA0 == 0x20:
            cpu_state = 'jazelle'
        else:
            raise NotImplementedError('Unhandled branch byte 4: 0x%02x' % bytes[4])

    # Shift the address according to current CPU state.
    if cpu_state == 'arm':
        addr = (addr & 0xFFFFFFFE) << 1
        addr_bits += 1
    elif cpu_state == 'thumb':
        addr = addr & 0xFFFFFFFE
    elif cpu_state == 'jazelle':
        addr = (addr & 0xFFFFFFFFE) >> 1
        addr_bits -= 1
    else:
        raise NotImplementedError('Unhandled state: ' + cpu_state)

    # If the address wasn't full, fill in with the previous address.
    if addrlen < 5:
        addr |= ref_addr & (0xFFFFFFFF << addr_bits)

    return addr, addrlen, cpu_state, exc_info

class Decoder(srd.Decoder):
    api_version = 2
    id = 'arm_etmv3'
    name = 'ARM ETMv3'
    longname = 'ARM Embedded Trace Macroblock'
    desc = 'Decode ETM instruction trace packets.'
    license = 'gplv2+'
    inputs = ['uart']
    outputs = ['arm_etmv3']
    annotations = (
        ('trace', 'Trace info'),
        ('branch', 'Branches'),
        ('exception', 'Exceptions'),
        ('execution', 'Instruction execution'),
        ('data', 'Data access'),
        ('pc', 'Program counter'),
        ('instr_e', 'Executed instructions'),
        ('instr_n', 'Not executed instructions'),
        ('source', 'Source code'),
        ('location', 'Current location'),
        ('function', 'Current function'),
    )
    annotation_rows = (
        ('trace', 'Trace info', (0,)),
        ('flow', 'Code flow', (1, 2, 3,)),
        ('data', 'Data access', (4,)),
        ('pc', 'Program counter', (5,)),
        ('instruction', 'Instructions', (6, 7,)),
        ('source', 'Source code', (8,)),
        ('location', 'Current location', (9,)),
        ('function', 'Current function', (10,)),
    )
    options = (
        {'id': 'objdump', 'desc': 'objdump path',
            'default': 'arm-none-eabi-objdump'},
        {'id': 'objdump_opts', 'desc': 'objdump options',
            'default': '-lSC'},
        {'id': 'elffile', 'desc': '.elf path',
            'default': ''},
        {'id': 'branch_enc', 'desc': 'Branch encoding',
            'default': 'alternative', 'values': ('alternative', 'original')},
    )

    def __init__(self, **kwargs):
        self.buf = []
        self.syncbuf = []
        self.prevsample = 0
        self.last_branch = 0
        self.cpu_state = 'arm'
        self.current_pc = 0
        self.current_loc = None
        self.current_func = None
        self.next_instr_lookup = {}
        self.file_lookup = {}
        self.func_lookup = {}
        self.disasm_lookup = {}
        self.source_lookup = {}

    def start(self):
        self.out_ann = self.register(srd.OUTPUT_ANN)
        self.load_objdump()

    def load_objdump(self):
        '''Parse disassembly obtained from objdump into two tables:
        next_instr_lookup: Find the next PC addr from current PC.
        disasm_lookup: Find the instruction text from current PC.
        source_lookup: Find the source code line from current PC.
        '''
        if not (self.options['objdump'] and self.options['elffile']):
            return

        opts = [self.options['objdump']]
        opts += self.options['objdump_opts'].split()
        opts += [self.options['elffile']]

        try:
            disasm = subprocess.check_output(opts)
        except subprocess.CalledProcessError:
            return

        disasm = disasm.decode('utf-8', 'replace')

        instpat = re.compile('\s*([0-9a-fA-F]+):\t+([0-9a-fA-F ]+)\t+([a-zA-Z][^;]+)\s*;?.*')
        branchpat = re.compile('(b|bl|b..|bl..|cbnz|cbz)(?:\.[wn])?\s+(?:r[0-9]+,\s*)?([0-9a-fA-F]+)')
        filepat = re.compile('[^\s]+[/\\\\]([a-zA-Z0-9._-]+:[0-9]+)(?:\s.*)?')
        funcpat = re.compile('[0-9a-fA-F]+\s*<([^>]+)>:.*')

        prev_src = ''
        prev_file = ''
        prev_func = ''

        for line in disasm.split('\n'):
            m = instpat.match(line)
            if m:
                addr = int(m.group(1), 16)
                raw = m.group(2)
                disas = m.group(3).strip().replace('\t', ' ')
                self.disasm_lookup[addr] = disas
                self.source_lookup[addr] = prev_src
                self.file_lookup[addr] = prev_file
                self.func_lookup[addr] = prev_func

                # Next address in direct sequence.
                ilen = len(raw.replace(' ', '')) // 2
                next_n = addr + ilen

                # Next address if branch is taken.
                bm = branchpat.match(disas)
                if bm:
                    next_e = int(bm.group(2), 16)
                else:
                    next_e = next_n

                self.next_instr_lookup[addr] = (next_n, next_e)
            else:
                m = funcpat.match(line)
                if m:
                    prev_func = m.group(1)
                    prev_src = None
                else:
                    m = filepat.match(line)
                    if m:
                        prev_file = m.group(1)
                        prev_src = None
                    else:
                        prev_src = line.strip()

    def flush_current_loc(self):
        if self.current_loc is not None:
            ss, es, loc, src = self.current_loc
            if loc:
                self.put(ss, es, self.out_ann, [9, [loc]])
            if src:
                self.put(ss, es, self.out_ann, [8, [src]])
            self.current_loc = None

    def flush_current_func(self):
        if self.current_func is not None:
            ss, es, func = self.current_func
            if func:
                self.put(ss, es, self.out_ann, [10, [func]])
            self.current_func = None

    def instructions_executed(self, exec_status):
        '''Advance program counter based on executed instructions.
        Argument is a list of False for not executed and True for executed
        instructions.
        '''

        if len(exec_status) == 0:
            return

        tdelta = max(1, (self.prevsample - self.startsample) / len(exec_status))

        for i, exec_status in enumerate(exec_status):
            pc = self.current_pc
            default_next = pc + 2 if self.cpu_state == 'thumb' else pc + 4
            target_n, target_e = self.next_instr_lookup.get(pc, (default_next, default_next))
            ss = self.startsample + round(tdelta * i)
            es = self.startsample + round(tdelta * (i+1))

            self.put(ss, es, self.out_ann,
                     [5, ['PC 0x%08x' % pc, '0x%08x' % pc, '%08x' % pc]])

            new_loc = self.file_lookup.get(pc)
            new_src = self.source_lookup.get(pc)
            new_dis = self.disasm_lookup.get(pc)
            new_func = self.func_lookup.get(pc)

            # Report source line only when it changes.
            if self.current_loc is not None:
                if new_loc != self.current_loc[2] or new_src != self.current_loc[3]:
                    self.flush_current_loc()

            if self.current_loc is None:
                self.current_loc = [ss, es, new_loc, new_src]
            else:
                self.current_loc[1] = es

            # Report function name only when it changes.
            if self.current_func is not None:
                if new_func != self.current_func[2]:
                    self.flush_current_func()

            if self.current_func is None:
                self.current_func = [ss, es, new_func]
            else:
                self.current_func[1] = es

            # Report instruction every time.
            if new_dis:
                if exec_status:
                    a = [6, ['Executed: ' + new_dis, new_dis, new_dis.split()[0]]]
                else:
                    a = [7, ['Not executed: ' + new_dis, new_dis, new_dis.split()[0]]]
                self.put(ss, es, self.out_ann, a)

            if exec_status:
                self.current_pc = target_e
            else:
                self.current_pc = target_n

    def get_packet_type(self, byte):
        '''Identify packet type based on its first byte.
           See ARM IHI0014Q section "ETMv3 Signal Protocol" "Packet Types"
        '''
        if byte & 0x01 == 0x01:
            return 'branch'
        elif byte == 0x00:
            return 'a_sync'
        elif byte == 0x04:
            return 'cyclecount'
        elif byte == 0x08:
            return 'i_sync'
        elif byte == 0x0C:
            return 'trigger'
        elif byte & 0xF3 in (0x20, 0x40, 0x60):
            return 'ooo_data'
        elif byte == 0x50:
            return 'store_failed'
        elif byte == 0x70:
            return 'i_sync'
        elif byte & 0xDF in (0x54, 0x58, 0x5C):
            return 'ooo_place'
        elif byte == 0x3C:
            return 'vmid'
        elif byte & 0xD3 == 0x02:
            return 'data'
        elif byte & 0xFB == 0x42:
            return 'timestamp'
        elif byte == 0x62:
            return 'data_suppressed'
        elif byte == 0x66:
            return 'ignore'
        elif byte & 0xEF == 0x6A:
            return 'value_not_traced'
        elif byte == 0x6E:
            return 'context_id'
        elif byte == 0x76:
            return 'exception_exit'
        elif byte == 0x7E:
            return 'exception_entry'
        elif byte & 0x81 == 0x80:
            return 'p_header'
        else:
            return 'unknown'

    def fallback(self, buf):
        ptype = self.get_packet_type(buf[0])
        return [0, ['Unhandled ' + ptype + ': ' + ' '.join(['%02x' % b for b in buf])]]

    def handle_a_sync(self, buf):
        if buf[-1] == 0x80:
            return [0, ['Synchronization']]

    def handle_exception_exit(self, buf):
        return [2, ['Exception exit']]

    def handle_exception_entry(self, buf):
        return [2, ['Exception entry']]

    def handle_i_sync(self, buf):
        contextid_bytes = 0 # This is the default ETM config.

        if len(buf) < 6:
            return None # Packet definitely not full yet.

        if buf[0] == 0x08: # No cycle count.
            cyclecount = None
            idx = 1 + contextid_bytes # Index to info byte.
        elif buf[0] == 0x70: # With cycle count.
            cyclecount, cyclen = parse_varint(buf[1:6])
            idx = 1 + cyclen + contextid_bytes

        if len(buf) <= idx + 4:
            return None
        infobyte = buf[idx]
        addr = parse_uint(buf[idx+1:idx+5])

        reasoncode = (infobyte >> 5) & 3
        reason = ('Periodic', 'Tracing enabled', 'After overflow', 'Exit from debug')[reasoncode]
        jazelle = (infobyte >> 4) & 1
        nonsec = (infobyte >> 3) & 1
        altisa = (infobyte >> 2) & 1
        hypervisor = (infobyte >> 1) & 1
        thumb = addr & 1
        addr &= 0xFFFFFFFE

        if reasoncode == 0 and self.current_pc != addr:
            self.put(self.startsample, self.prevsample, self.out_ann,
                     [0, ['WARN: Unexpected PC change 0x%08x -> 0x%08x' % \
                     (self.current_pc, addr)]])
        elif reasoncode != 0:
            # Reset location when the trace has been interrupted.
            self.flush_current_loc()
            self.flush_current_func()

        self.last_branch = addr
        self.current_pc = addr

        if jazelle:
            self.cpu_state = 'jazelle'
        elif thumb:
            self.cpu_state = 'thumb'
        else:
            self.cpu_state = 'arm'

        cycstr = ''
        if cyclecount is not None:
            cycstr = ', cyclecount %d' % cyclecount

        if infobyte & 0x80: # LSIP packet
            self.put(self.startsample, self.prevsample, self.out_ann,
                     [0, ['WARN: LSIP I-Sync packet not implemented']])

        return [0, ['I-Sync: %s, PC 0x%08x, %s state%s' % \
                    (reason, addr, self.cpu_state, cycstr), \
                    'I-Sync: %s 0x%08x' % (reason, addr)]]

    def handle_trigger(self, buf):
        return [0, ['Trigger event', 'Trigger']]

    def handle_p_header(self, buf):
        # Only non cycle-accurate mode supported.
        if buf[0] & 0x83 == 0x80:
            n = (buf[0] >> 6) & 1
            e = (buf[0] >> 2) & 15

            self.instructions_executed([1] * e + [0] * n)

            if n:
                return [3, ['%d instructions executed, %d skipped due to ' \
                            'condition codes' % (e, n),
                            '%d ins exec, %d skipped' % (e, n),
                            '%dE,%dN' % (e, n)]]
            else:
                return [3, ['%d instructions executed' % e,
                            '%d ins exec' % e, '%dE' % e]]
        elif buf[0] & 0xF3 == 0x82:
            i1 = (buf[0] >> 3) & 1
            i2 = (buf[0] >> 2) & 1
            self.instructions_executed([not i1, not i2])
            txt1 = ('executed', 'skipped')
            txt2 = ('E', 'S')
            return [3, ['Instruction 1 %s, instruction 2 %s' % (txt1[i1], txt1[i2]),
                        'I1 %s, I2 %s' % (txt2[i1], txt2[i2]),
                        '%s,%s' % (txt2[i1], txt2[i2])]]
        else:
            return self.fallback(buf)

    def handle_branch(self, buf):
        if buf[-1] & 0x80 != 0x00:
            return None # Not complete yet.

        brinfo = parse_branch_addr(buf, self.last_branch, self.cpu_state,
                                   self.options['branch_enc'])

        if brinfo is None:
            return None # Not complete yet.

        addr, addrlen, cpu_state, exc_info = brinfo
        self.last_branch = addr
        self.current_pc = addr

        txt = ''

        if cpu_state != self.cpu_state:
            txt += ', to %s state' % cpu_state
            self.cpu_state = cpu_state

        annidx = 1

        if exc_info:
            annidx = 2
            ns, exc, cancel, altisa, hyp, resume = exc_info
            if ns:
                txt += ', to non-secure state'
            if exc:
                if exc < len(exc_names):
                    txt += ', exception %s' % exc_names[exc]
                else:
                    txt += ', exception 0x%02x' % exc
            if cancel:
                txt += ', instr cancelled'
            if altisa:
                txt += ', to AltISA'
            if hyp:
                txt += ', to hypervisor'
            if resume:
                txt += ', instr resume 0x%02x' % resume

        return [annidx, ['Branch to 0x%08x%s' % (addr, txt),
                         'B 0x%08x%s' % (addr, txt)]]

    def decode(self, ss, es, data):
        ptype, rxtx, pdata = data

        if ptype != 'DATA':
            return

        # Reset packet if there is a long pause between bytes.
        # This helps getting the initial synchronization.
        self.byte_len = es - ss
        if ss - self.prevsample > 16 * self.byte_len:
            self.flush_current_loc()
            self.flush_current_func()
            self.buf = []
        self.prevsample = es

        self.buf.append(pdata[0])

        # Store the start time of the packet.
        if len(self.buf) == 1:
            self.startsample = ss

        # Keep separate buffer for detection of sync packets.
        # Sync packets override everything else, so that we can regain sync
        # even if some packets are corrupted.
        self.syncbuf = self.syncbuf[-4:] + [pdata[0]]
        if self.syncbuf == [0x00, 0x00, 0x00, 0x00, 0x80]:
            self.buf = self.syncbuf
            self.syncbuf = []

        # See if it is ready to be decoded.
        ptype = self.get_packet_type(self.buf[0])
        if hasattr(self, 'handle_' + ptype):
            func = getattr(self, 'handle_' + ptype)
            data = func(self.buf)
        else:
            data = self.fallback(self.buf)

        if data is not None:
            if data:
                self.put(self.startsample, es, self.out_ann, data)
            self.buf = []