From 3f302d519e813af30a796a16f84e688550827ae0 Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Sat, 21 Jul 2012 19:16:16 +0200 Subject: srd: onewire_link/network: Fix annotations, small cleanups. The annotation types are 'Text' and 'Warnings', not 'Link' etc. as the annotations of the onewire_link PD (for example) are already clearly from the link layer. The annotation types should be different things/formats of a specific PD's annotation output instead (like "Celsius" / "Kelvin" for some temperature sensor, for example). --- decoders/onewire_link/onewire_link.py | 39 +++++++++++++---------------- decoders/onewire_network/onewire_network.py | 20 +++++++-------- 2 files changed, 26 insertions(+), 33 deletions(-) (limited to 'decoders') diff --git a/decoders/onewire_link/onewire_link.py b/decoders/onewire_link/onewire_link.py index 44ed65a..c8bda56 100644 --- a/decoders/onewire_link/onewire_link.py +++ b/decoders/onewire_link/onewire_link.py @@ -32,10 +32,10 @@ class Decoder(srd.Decoder): inputs = ['logic'] outputs = ['onewire_link'] probes = [ - {'id': 'owr', 'name': 'OWR', 'desc': '1-Wire bus'}, + {'id': 'owr', 'name': 'OWR', 'desc': '1-Wire signal line'}, ] optional_probes = [ - {'id': 'pwr', 'name': 'PWR', 'desc': '1-Wire power'}, + {'id': 'pwr', 'name': 'PWR', 'desc': '1-Wire power supply pin'}, ] options = { 'overdrive': ['Overdrive', 1], @@ -50,19 +50,18 @@ class Decoder(srd.Decoder): 'cnt_overdrive_reset': ['Overdrive mode reset time', 0], } annotations = [ - ['Link', 'Link layer events (reset, presence, bit slots)'], + ['Text', 'Human-readable text'], + ['Warnings', 'Human-readable warnings'], ] def __init__(self, **kwargs): self.samplenum = 0 - # Link layer variables self.state = 'WAIT FOR FALLING EDGE' self.present = 0 self.bit = 0 self.bit_cnt = 0 self.command = 0 self.overdrive = 0 - # Event timing variables self.fall = 0 self.rise = 0 @@ -74,25 +73,21 @@ class Decoder(srd.Decoder): # Check if samplerate is appropriate. if self.options['overdrive']: - self.put(0, 0, self.out_ann, [0, - ['NOTE: Sample rate checks assume overdrive mode.']]) if self.samplerate < 2000000: - self.put(0, 0, self.out_ann, [0, + self.put(0, 0, self.out_ann, [1, ['ERROR: Sampling rate is too low. Must be above 2MHz ' + 'for proper overdrive mode decoding.']]) elif self.samplerate < 5000000: - self.put(0, 0, self.out_ann, [0, + self.put(0, 0, self.out_ann, [1, ['WARNING: Sampling rate is suggested to be above 5MHz ' + 'for proper overdrive mode decoding.']]) else: - self.put(0, 0, self.out_ann, [0, - ['NOTE: Sample rate checks assume normal mode only.']]) if self.samplerate < 400000: - self.put(0, 0, self.out_ann, [0, + self.put(0, 0, self.out_ann, [1, ['ERROR: Sampling rate is too low. Must be above ' + '400kHz for proper normal mode decoding.']]) elif (self.samplerate < 1000000): - self.put(0, 0, self.out_ann, [0, + self.put(0, 0, self.out_ann, [1, ['WARNING: Sampling rate is suggested to be above ' + '1MHz for proper normal mode decoding.']]) @@ -143,7 +138,7 @@ class Decoder(srd.Decoder): time_min = float(self.cnt_normal_bit) / self.samplerate time_max = float(self.cnt_normal_bit + 1) / self.samplerate if (time_min < 0.000005) or (time_max > 0.000015): - self.put(0, 0, self.out_ann, [0, + self.put(0, 0, self.out_ann, [1, ['WARNING: The normal mode data sample time interval ' + '(%2.1fus-%2.1fus) should be inside (5.0us, 15.0us).' % (time_min * 1000000, time_max * 1000000)]]) @@ -151,7 +146,7 @@ class Decoder(srd.Decoder): time_min = float(self.cnt_normal_presence) / self.samplerate time_max = float(self.cnt_normal_presence + 1) / self.samplerate if (time_min < 0.0000681) or (time_max > 0.000075): - self.put(0, 0, self.out_ann, [0, + self.put(0, 0, self.out_ann, [1, ['WARNING: The normal mode presence sample time interval ' + '(%2.1fus-%2.1fus) should be inside (68.1us, 75.0us).' % (time_min * 1000000, time_max * 1000000)]]) @@ -159,7 +154,7 @@ class Decoder(srd.Decoder): time_min = float(self.cnt_overdrive_bit) / self.samplerate time_max = float(self.cnt_overdrive_bit + 1) / self.samplerate if (time_min < 0.000001) or (time_max > 0.000002): - self.put(0, 0, self.out_ann, [0, + self.put(0, 0, self.out_ann, [1, ['WARNING: The overdrive mode data sample time interval ' + '(%2.1fus-%2.1fus) should be inside (1.0us, 2.0us).' % (time_min * 1000000, time_max * 1000000)]]) @@ -167,7 +162,7 @@ class Decoder(srd.Decoder): time_min = float(self.cnt_overdrive_presence) / self.samplerate time_max = float(self.cnt_overdrive_presence + 1) / self.samplerate if (time_min < 0.0000073) or (time_max > 0.000010): - self.put(0, 0, self.out_ann, [0, + self.put(0, 0, self.out_ann, [1, ['WARNING: The overdrive mode presence sample time interval ' + '(%2.1fus-%2.1fus) should be inside (7.3us, 10.0us).' % (time_min*1000000, time_max*1000000)]]) @@ -205,7 +200,7 @@ class Decoder(srd.Decoder): continue self.put(self.fall, self.samplenum, self.out_ann, - [0, ['BIT: %01x' % self.bit]]) + [0, ['Bit: %d' % self.bit]]) self.put(self.fall, self.samplenum, self.out_proto, ['BIT', self.bit]) @@ -215,7 +210,7 @@ class Decoder(srd.Decoder): self.command |= (self.bit << self.bit_cnt) elif self.bit_cnt == 8 and self.command in [0x3c, 0x69]: self.put(self.fall, self.cnt_bit[self.overdrive], - self.out_ann, [0, ['ENTER OVERDRIVE MODE']]) + self.out_ann, [0, ['Entering overdrive mode']]) # Increment the bit counter. self.bit_cnt += 1 # Wait for next slot. @@ -234,7 +229,7 @@ class Decoder(srd.Decoder): # Exit overdrive mode. if self.overdrive: self.put(self.fall, self.cnt_bit[self.overdrive], - self.out_ann, [0, ['EXIT OVERDRIVE MODE']]) + self.out_ann, [0, ['Exiting overdrive mode']]) self.overdrive = 0 # Clear command bit counter and data register. self.bit_cnt = 0 @@ -264,8 +259,8 @@ class Decoder(srd.Decoder): continue self.put(self.fall, self.samplenum, self.out_ann, - [0, ['RESET/PRESENCE: %s' - % ('False' if self.present else 'True')]]) + [0, ['Reset/presence: %s' + % ('false' if self.present else 'true')]]) self.put(self.fall, self.samplenum, self.out_proto, ['RESET/PRESENCE', not self.present]) # Wait for next slot. diff --git a/decoders/onewire_network/onewire_network.py b/decoders/onewire_network/onewire_network.py index f215344..982a64e 100644 --- a/decoders/onewire_network/onewire_network.py +++ b/decoders/onewire_network/onewire_network.py @@ -47,14 +47,12 @@ class Decoder(srd.Decoder): optional_probes = [] options = {} annotations = [ - ['Network', 'Network layer events (device addressing)'], + ['Text', 'Human-readable text'], ] def __init__(self, **kwargs): - # Event timing variables self.beg = 0 self.end = 0 - # Network layer variables self.state = 'COMMAND' self.bit_cnt = 0 self.search = 'P' @@ -86,7 +84,7 @@ class Decoder(srd.Decoder): self.search = 'P' self.bit_cnt = 0 self.put(ss, es, self.out_ann, - [0, ['RESET/PRESENCE: %s' % ('True' if val else 'False')]]) + [0, ['Reset/presence: %s' % ('true' if val else 'false')]]) self.put(ss, es, self.out_proto, ['RESET/PRESENCE', val]) self.state = 'COMMAND' return @@ -100,16 +98,16 @@ class Decoder(srd.Decoder): if self.onewire_collect(8, val, ss, es) == 0: return if self.data in command: - self.putx([0, ['ROM COMMAND: 0x%02x \'%s\'' + self.putx([0, ['ROM command: 0x%02x \'%s\'' % (self.data, command[self.data][0])]]) self.state = command[self.data][1] else: - self.putx([0, ['ROM COMMAND: 0x%02x \'%s\'' - % (self.data, 'UNRECOGNIZED')]]) + self.putx([0, ['ROM command: 0x%02x \'%s\'' + % (self.data, 'unrecognized')]]) self.state = 'COMMAND ERROR' elif self.state == 'GET ROM': # A 64 bit device address is selected. - # Family code (1B) + serial number (6B) + CRC (1B) + # Family code (1 byte) + serial number (6 bytes) + CRC (1 byte) if self.onewire_collect(64, val, ss, es) == 0: return self.rom = self.data & 0xffffffffffffffff @@ -118,7 +116,7 @@ class Decoder(srd.Decoder): self.state = 'TRANSPORT' elif self.state == 'SEARCH ROM': # A 64 bit device address is searched for. - # Family code (1B) + serial number (6B) + CRC (1B) + # Family code (1 byte) + serial number (6 bytes) + CRC (1 byte) if self.onewire_search(64, val, ss, es) == 0: return self.rom = self.data & 0xffffffffffffffff @@ -129,13 +127,13 @@ class Decoder(srd.Decoder): # The transport layer is handled in byte sized units. if self.onewire_collect(8, val, ss, es) == 0: return - self.putx([0, ['DATA: 0x%02x' % self.data]]) + self.putx([0, ['Data: 0x%02x' % self.data]]) self.puty(['DATA', self.data]) elif self.state == 'COMMAND ERROR': # Since the command is not recognized, print raw data. if self.onewire_collect(8, val, ss, es) == 0: return - self.putx([0, ['ROM ERROR DATA: 0x%02x' % self.data]]) + self.putx([0, ['ROM error data: 0x%02x' % self.data]]) else: raise Exception('Invalid state: %s' % self.state) -- cgit v1.2.3-70-g09d2