libsigrokdecode.git - libsigrokdecode

Age	Commit message (Collapse)	Author
2015-11-22	spi: Add a 'TRANSFER' output type.	Paul "LeoNerd" Evans

2015-11-22	Fix documentation comment in SPI decoder	Paul "LeoNerd" Evans

2015-04-03	spi: Don't decode data lines if CS isn't asserted	Andreas Sandberg
	Avoid decoding and outputting data from the SPI bus if the CS pin hasn't been asserted. This avoids confusing both users and stacked decoders which otherwise end up seeing traffic intended for other chips (or just noise). Note: The old behavior of decoding all traffic is still in place if no CS pin has been wired up to the decoder. This fixes bug #559.
2014-12-28	spi: Add binary output facilities for MISO/MOSI.	Uwe Hermann
	This fixes bug #424.
2014-10-19	spi: Use 'None' to signal the missing CS# pin.	Jens Steinhauser

2014-10-19	spi: Tell stacked decoders about missing CS# signal.	Jens Steinhauser
	This could previously be detected by the absence of a CS-CHANGE packet before the first data packet, but it makes the stacked decoder simpler if it is told directly.
2014-10-13	All PDs: More consistent names for ss/es variables.	Uwe Hermann
	Use self.ss/self.es, or if there's a need to differentiate them a bit more, use self.ss_<suffix>/self.es_<suffix> consistently. Also, drop some unused variables.
2014-08-14	spi/nrf24l01/uart: Use ChannelError exception.	Uwe Hermann
	Rename the old MissingDataError to the clearer ChannelError. Also, add ChannelError in the UART decoder.
2014-07-15	All PDs: Minor whitespace and consistency fixes.	Uwe Hermann
	- No newlines at the end of files. - No trailing ';' characters. - Comparison with None: Use 'is None' or 'is not None'. - Comparison with True/False: Use 'if cond:' or 'if not cond:'. - Various minor whitespace fixes.
2014-07-09	Various PDs: Throw SamplerateError instead of Exception.	Uwe Hermann
	Also, use the "if not self.samplerate" form, which catches both the case where self.samplerate is None, as well as the case where it is 0.
2014-07-08	spi: Fix order of MISO/MOSI data items.	Jens Steinhauser

2014-06-27	spi: Add coverage tests for all exceptions.	Bert Vermeulen

2014-06-27	spi: Refactor for more coverage, and remove dead code.	Bert Vermeulen

2014-04-15	All PDs: More consistent OUTPUT_PYTHON format docs.	Uwe Hermann

2014-04-15	All PDs: Bump api_version to 2.	Uwe Hermann
	Older libsigrokdecode versions are no longer able to use the current versions of the PDs (various changes in syntax etc).
2014-04-13	Rename 'probe' to 'channel' everywhere.	Uwe Hermann
	Variables of type 'struct srd_channel ' are consistently named 'pdch' to make them easily distinguishable from libsigrok's 'struct sr_channel ' variables that are consistently named 'ch'.
2014-03-12	Various PDs: Minor option related fixes.	Uwe Hermann

2014-03-10	Probes, optional probes and annotations now take a tuple.	Bert Vermeulen
	Annotation entries also consist of a tuple, not a list.
2014-03-10	Change PD options to be a tuple of dictionaries.	Bert Vermeulen
	Each option consists of a dictionary with the following keys: id The option id, which is passed in when setting a value. desc A description of the option, suitable for display. def The default value for this option. values (optional) If present, a tuple containing values the option may take. They must be of the same type as the default. Valid types for the options are UTF-8-encoded strings, integers, and floating point values.
2014-02-19	spi: Fix some start/end samplenumbers for PYTHON output.	Uwe Hermann
	This fixes the data/annotations of stacked PDs.
2014-02-19	spi: Fix a bug when only supplying MOSI (but not MISO).	Uwe Hermann

2014-02-09	spi: Use/store bits in MSB-first order.	Uwe Hermann
	This makes things a bit easier/clearer for most stacked PDs.
2014-02-09	spi: Fix warnings about CS# being de-asserted.	Uwe Hermann

2014-02-09	spi: Throw an error if neither MISO nor MOSI was supplied.	Uwe Hermann

2014-02-09	spi: Fix incorrect dataword endsample numbers.	Uwe Hermann

2014-02-09	spi: Refactoring and cleanups.	Uwe Hermann

2014-02-09	spi: Factor out reset_decoder_state().	Uwe Hermann

2014-02-09	spi: Output per-bit annotations and OUTPUT_PYTHON data.	Uwe Hermann
	This can be used by higher-level PDs to decode per-bit items (not just based on whole datawords).
2014-02-01	spi: Improve probe names/descriptions a bit.	Uwe Hermann

2014-01-31	spi: Define annotation rows.	Uwe Hermann

2014-01-30	s/out_proto/out_python/.	Uwe Hermann
	The output type is now called OUTPUT_PYTHON, adapt all PDs to that.
2014-01-29	spi: Rename 'sck' to the more common 'clk'.	Uwe Hermann

2014-01-29	spi: Allow MISO or MOSI to be optional.	Uwe Hermann
	This fixes bug #175.
2014-01-28	spi: Drop temporary hack for combined MISO/MOSI out.	Uwe Hermann

2014-01-28	All PDs: Consistent naming/case for annotation shortnames/IDs.	Uwe Hermann

2014-01-28	All PDs: Drop unneeded comments.	Uwe Hermann
	The single comment re-stating the PD's name / description / purpose in each pd.py file is not really needed, that info is available in the Decoder class' attributes already.
2013-11-15	Drop outdated report: this should be handled by a frontend.	Bert Vermeulen

2013-11-15	Use the new Decoder.register() API	Bert Vermeulen

2013-11-15	Emit meta bitrate	Bert Vermeulen

2013-11-07	Rename inter-PD output type to SRD_OUTPUT_PYTHON	Bert Vermeulen
	This better reflects what it is: a python object generated and processed by python code.
2013-10-30	The start() method no longer takes a metadata parameter	Bert Vermeulen

2013-09-12	spi: Add some documentation, move OUTPUT_PROTO docs.	Uwe Hermann
	Add a short help text for the PD and move the OUTPUT_PROTO docs to pd.py since they're not meant for the user too see.
2013-09-12	spi: Make CS# optional and use it if supplied.	Uwe Hermann
	The CS# pin is now optional, it can either be supplied to the PD or not. If it _is_ supplied, reset the PD state every time it changes. This has the effect that "incomplete" SPI frames and those where CS# is not asserted are ignored and not decoded. This fixes bug #152.
2013-09-12	spi: Refactor code, use a state machine.	Uwe Hermann

2013-09-12	spi: Provide multiple annotation types.	Uwe Hermann
	For now SPI gets the following annotation types: - MISO/MOSI SPI data - MISO SPI data - MOSI SPI data (i.e. you can see either MISO, or MOSI, or both; the latter is most useful for CLI usage) Also, show the hex values as e.g. F5 (upper-case letters, no "0x" prefix).
2013-09-12	spi: Fix start-/end-sample numbers.	Uwe Hermann
	This now makes the SPI decoder suitable for use in GUIs. This fixes bug #150.
2013-09-12	spi: Make data format a PD option, add annotation types.	Uwe Hermann
	The data format can be specified via the PD's "format" option now, it is no longer an annotation type. Also, add and use two annotation types: "Data" and "Warnings".
2013-04-23	GPL headers: Use correct project name.	Uwe Hermann

2012-11-24	All PDs: Name the files pd.py consistently.	Uwe Hermann
	The Python module name is determined by the directory name (e.g. dcf77), the *.py file names in that directory don't matter and can be kept consistent.