libsigrokdecode.git - libsigrokdecode

Age	Commit message (Collapse)	Author
2013-12-12	runtc: Add support for binary output.	Bert Vermeulen

2013-12-12	Use new binary class definition format.	Bert Vermeulen

2013-12-12	Binary classes are now defined as (name, description).	Bert Vermeulen

2013-12-11	Easier access to sequences of strings, not just lists.	Bert Vermeulen

2013-12-11	runtc: Return errorcode according to testcase result.	Bert Vermeulen

2013-12-11	pdtest: Use -dd to turn on SR/SRD debugging.	Bert Vermeulen

2013-12-11	check: Make sure to test this set of decoders, not the installed ones.	Bert Vermeulen

2013-12-11	Load decoders from all search paths, not just the default.	Bert Vermeulen
	srd_decoder_load_all() was really only getting a list of decoders from the default (installation) path, so could not find uninstalled decoders, or those in a custom added search path. This broke development of new PDs when using the SIGROKDECODE_DIR environment variable, and broke many of the unit tests in the tests/ directory -- those actually tested against the already-installed decoders, not the ones about to be installed.
2013-12-11	Clear decoder list after unloading, not just at exit.	Bert Vermeulen

2013-12-11	runtc: Make sure to test this set of decoders, not the installed ones.	Bert Vermeulen

2013-12-11	pdtest: Don't bother with diff if any error at all occurred.	Bert Vermeulen

2013-12-11	pdtest: Add option for custom sigrok-dumps repository path.	Bert Vermeulen

2013-12-11	pdtest: Always sanity-check all testcases.	Bert Vermeulen

2013-12-11	Clean up runtc build.	Bert Vermeulen
	This only compiles libsigrok into the one target that needs it, instead of slopping it all over the place.
2013-12-10	Add protocol decoder testing framework.	Bert Vermeulen
	This adds a tool in the tests directory, called pdtest. It uses the "test/" directory in every PD directory, if present, to run the PD against dumps found in the sigrok-dumps repository, and compares the output against ".output" files in the "test/" directory. The file "test/test.conf" is used to configure which tests to run. A separate tool (tests/runtc.c) is used to run the actual decoding and report output. To get an overview of the options, run tests/pdtest without any options.
2013-12-10	API clarification.	Bert Vermeulen

2013-12-10	Fix 'dist' make target.	Bert Vermeulen

2013-12-09	Avoid GError warning when unloading decoders.	Bert Vermeulen

2013-12-09	Support DESTDIR on install targets.	Bert Vermeulen
	Fixes bug 215.
2013-12-04	parallel: start(): Drop obsoleted metadata parameter.	Uwe Hermann
	This fixes bug #202.
2013-12-03	uart: Display non-ASCII characters properly.	Uwe Hermann
	We use the [XX] notation for non-printable characters, which is what various other logic analyzer software packages do too, e.g. the CWAV USBee Suite. This fixes bug #201.
2013-11-29	Python 3.2 and portability fixes.	Bert Vermeulen

2013-11-27	Clean up autoconf leftover configuration.	Bert Vermeulen

2013-11-27	edid: Make sure to install the vendor list.	Bert Vermeulen

2013-11-27	Automate protocol decoder installation.	Bert Vermeulen
	This automatically figures out the files to install for each protocol decoder, without involving autotools. All python files (filenames ending in .py) are always installed. If a protocol decoder requires installation of a non-python file, a small file called 'config' can be created in that protocol decoder's directory, with the following content: # comments are ok extra-install vendorlist.txt commands.txt
2013-11-26	Remove 64-probe limit.	Bert Vermeulen
	Fixes bug 120.
2013-11-19	Add a missing #include.	Uwe Hermann
	This causes compiler errors in some setups otherwise, e.g.: CC libsigrokdecode_la-session.lo session.c: In function 'srd_session_metadata_set': session.c:195:46: error: expected ')' before 'PRIu64' srd_dbg("Setting session %d samplerate to %"PRIu64".", ^ session.c: In function 'srd_session_send': session.c:242:15: error: expected ')' before 'PRIu64' "number %" PRIu64 ", %" PRIu64 " bytes at 0x%p", ^
2013-11-18	Turn off excessive logging	Bert Vermeulen

2013-11-18	Remove unreasonable test	Bert Vermeulen

2013-11-18	Fix inverted condition on doc check	Bert Vermeulen

2013-11-18	Don't try to load an already-loaded module	Bert Vermeulen
	Python silently uses the existing module anyway, but the library was counting it as an extra module. This was exposed by a test case in the test suite.
2013-11-18	Don't decrease borrowed reference to probe definition dict	Bert Vermeulen
	This fixes bug 177.
2013-11-18	Fix inverted condition on decoder check	Bert Vermeulen

2013-11-18	Check library initialization before handling decoders	Bert Vermeulen

2013-11-18	Clean up prototypes	Bert Vermeulen

2013-11-18	Better error checking on session metadata	Bert Vermeulen

2013-11-16	Only instance-related functionality remains, rename source file	Bert Vermeulen

2013-11-16	Move initialization/shutdown into srd.c	Bert Vermeulen

2013-11-16	Move session-specific functionality into session.c	Bert Vermeulen

2013-11-16	Minor cleanup	Bert Vermeulen

2013-11-15	Move versioning info out to separate header	Bert Vermeulen

2013-11-15	Use OUTPUT_BINARY with four classes.	Bert Vermeulen

2013-11-15	Implement OUTPUT_BINARY	Bert Vermeulen
	This requires the PD to have a tuple in its class called 'binary', which contains a list of strings describing the different binary classes it can output. For the SPI decoder this might be 'MOSI' and 'MISO', for example. The data is submitted to the frontend as struct srd_proto_data_binary, which contains the class that data belongs to.
2013-11-15	Drop obsolete report() method.	Bert Vermeulen

2013-11-15	Drop outdated report: this should be handled by a frontend.	Bert Vermeulen

2013-11-15	Use the new Decoder.register() API	Bert Vermeulen

2013-11-15	Emit meta bitrate	Bert Vermeulen

2013-11-15	Emit meta bitrate	Bert Vermeulen

2013-11-15	Prune dead code	Bert Vermeulen

2013-11-15	Implement OUTPUT_META	Bert Vermeulen
	This replaces the Decoder.add() method with Decoder.register(). The first argument is still output type, but all arguments are now optional: Decoder.register(output_type, id='someid', meta=(object-type, 'Name', 'Description')) 'id' defaults to the protocol decoder instance id, and only needs changing if a decoder chain needs to fork. 'object-type' refers to a Python object, such as int or str. After registering, the PD submits data as usual with Decoder.put(), with the only argument a value of the registered object-type.